Page 1 of 3 1 2 3 >
Topic Options
#2329558 - 07/01/17 09:02 AM E Body - Parts Wanted - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA
up

Top
#2329631 - 07/01/17 09:47 AM WANTED: 1970 CHALLENGER CONVERT QTR S/E BELT MOLDING [Re: moparts]
BlackHemiChall Offline
member

Registered: 11/07/03
Posts: 103
Loc: Denver, CO

********************FOUND!!!!!! THANKS MOPARTS!!!!!!! ***********

WANTED: Drivers Side 70 Challenger Convertible Qtr S/E Belt Molding. Not the standard convert molding that finishes off the convert opening, but the one that covers the whole top of the Qtr panel edge and attaches convert opening molding.(Looks the same as S/E trim, but for convert)

Part #3481721 or #3549629.

Please call 720-519-5326 or e-mail ecotruckwash@gmail.com.

$$$$$$$$$$$$$$$$$$$$ WILL PAY A FINDERS FEE OF $2500 FOR INFO LEADING TO A PURCHASE $$$$$$$$$$$$$$$$$$$$


Edited by BlackHemiChall (07/09/17 03:44 PM)

Top
#2330243 - 07/02/17 03:06 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
440mopar Offline
mopar

Registered: 08/24/07
Posts: 504
Loc: USA
Wanted: 1971 style gull wing. I would like an original but will consider a reproduction.

fourfortymopar at yahoo.com

Top
#2330563 - 07/03/17 08:27 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
rtsinc Offline
mopar

Registered: 05/09/05
Posts: 648
Loc: ill,usa,belvidere
STILL LOOKING FOR A RIGHT SIDE CONVERTIBLE CHALLENGER OR CUDA UPPER WINDSHIELD GARNISH MOLDING PAINTED NOT CHROME ,AT A RESONABLE PRICE.815 520 3227 RICH. PARTS IN PICTURE ARE SHOWN AS AN EXAMPLE.


Attachments
for sale parts 017.JPG



Top
#2331449 - 07/04/17 02:41 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: FLpenguin]
B5Cuda440-6 Offline
mopar

Registered: 08/30/15
Posts: 503
Loc: Indianapolis, IN
Looking for the following parts for my 1970 Cuda:

Passenger side “fish gill” rocker moulding, PN: 3549646 in NOS or mint condition for a show car. Willing to pay up to $2000.00 for an NOS moulding.

NOS Trunk Latch, PN: 2999345. Willing to pay up to $500.00 for NOS latch. (FOUND!)

NOS Inner tie rod, PN: 3420155, with “5885” casting. Willing to pay up to $1000.00 for correct NOS part.


Looking for the following 383/440 Saginaw power steering parts:

Power Steering Return Hose, PN: 2537699. I believe the correct diameter is 11/32. (FOUND!)

Power steering pump pulley with a date code in the range of 210-304th day of 1969.

Saginaw 383/440 power steering pump brackets – both front and rear.

2-Groove crankshaft pulley for 383/440 with power steering, PN: 2946789.

Correct red “flat tab” hose clamps for return line. (FOUND!)

Willing to pay TOP DOLLAR for the correct parts.

PM or e-mail at robert.traina@roche.com

Thanks everyone!


Edited by B5Cuda440-6 (08/03/17 08:30 PM)

Top
#2332686 - 07/06/17 04:47 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
musclecarman15 Offline


Registered: 10/03/14
Posts: 5
Loc: louisiana
WANTED E BODY REAR LEAF SPRINGS NUMBER 3400045,THX KEITH

Top
#2332999 - 07/07/17 09:59 AM Need a Milodon 18341 Oil Pickup asap [Re: moparts]
daryld Offline
member

Registered: 05/30/11
Posts: 8
Loc: NOLA
Need a Milodon 18341 oil pickup for a 6.4 swap. Part is on back order till August and I am planning on doing my swap in the next week or two. Thanks guys.

Daryl
dpduffy7@yahoo.com

Top
#2334541 - 07/10/17 06:17 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
71hoserunner Offline
member

Registered: 10/05/09
Posts: 110
Loc: Missouri
Need for a 71 Challenger Convertible. The rear tack rails for the convertible top. These bolt in and the top is stapled to it in the rear well. Mine are rusty. Need only the outer ends.

Keith Foy 314-540-3782
_________________________
Thanks,
Keith
keithfoy@att.net
314-540-3782

70 Challenger Conv (For Sale)
71 Challenger Conv Restomod (under Construction)
71 Roadrunner
08 Charger Super Bee SRT8 B5 Blue

Top
#2334787 - 07/10/17 02:04 PM Looking for these 2 parts for my '70 Dodge Challenger RT/SE [Re: moparts]
KZ4406 Offline
member

Registered: 05/05/15
Posts: 46
Loc: WV
1. The front 1/2 of the heater box, mine had a small piece that has broken off as designated but the red circle.





2. The left rear interior panel, mine is cracked at the bottom as designated by the red circle. If you have burnt orange that would be great but I can dye any other color.












Yes, I know repops are available but I am looking for OE. Thanks


Edited by KZ4406 (07/10/17 02:22 PM)

Top
#2335006 - 07/10/17 08:52 PM aar t/a engine block or assy. [Re: moparts]
ztriper Offline
member

Registered: 04/29/05
Posts: 20
Loc: danville,va
hi, still looking for the correct engine block or complete engine for my aar cuda if anyone has one please let me know the first #'s are OB292*** the car originally came from arizona then went to utah. I have a complete t/a engine for it i just wanted to see if the original one mite still be out there. I have looked for it for over 10 years now..


Edited by ztriper (07/10/17 08:53 PM)

Top
#2335757 - 07/12/17 08:04 AM Re: aar t/a engine block or assy. [Re: moparts]
JoeB70 Offline
member

Registered: 04/25/17
Posts: 7
Loc: MA
Looking for an original 4-speed pedal assembly, as complete as possible with hardware. Also looking for 4-speed console, Z-bar, etc.
Converting '70 Challenger from Auto to 4-speed so I need to stockpile parts.

Thanks

Top
#2337612 - 07/15/17 09:30 PM Re: aar t/a engine block or assy. [Re: moparts]
n96cuda Offline
member

Registered: 09/05/03
Posts: 160
Loc: indiana
Looking for original 71 cuda road lamp brackets. Also need an original 71 cuda front elastomeric rubber bumper for a real a22 car. Will buy or trade a nice 70 front elastomeric bumper

Top
#2337727 - 07/16/17 10:03 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
5carguy Offline
top fuel

Registered: 01/18/06
Posts: 1698
Loc: Lee Co. Fla.
I'm looking for a small block Federal power steering cooler.
PM here or Rtroyer1@comcast.net
Thanks for the ad Moparts

Top
#2338117 - 07/16/17 10:09 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: 5carguy]
convertcuda Offline
mopar

Registered: 10/02/07
Posts: 522
Loc: Wausau Wi
I'm looking 70 T style jack for a cuda. Must be pit free and mint shape. Let me know what you have. Thanks for the ad.

Ken 715-432-5080
convertcuda@gmail.com


Edited by convertcuda (07/16/17 10:14 PM)

Top
#2339379 - 07/18/17 08:03 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: VCODE]
1970mopar Offline
master

Registered: 08/18/03
Posts: 2920
Loc: California
Wanted:
Looking for a pair of original 70-71 Challenger Convertible rear interior panels in Black. 6 to 9 out of 10 condition prefered. Small nicks, scratches, wear considered, minor cracks depending where it is also considered. Prefer a pair that has not been refinished or painted but will consider all.

I know these are like finding a needle in a hay stack. Willing to spend $$$ for the right pair. What do you have?

Best to call, text or e-mail as I don't frequent Moparts

530.558.3500 or petedude28@yahoo.com

Thanks,
Pete

Top
#2341619 - 07/22/17 05:49 PM 1972 Barracuda passenger fender [Re: moparts]
hulmule Offline
super stock

Registered: 03/06/06
Posts: 1050
Loc: northeast ohio
Looking for the following parts for my son's 1972 Barracuda.
Passenger front fender.
grille- complete or will take broken pieces to make his work.
deck lid.
if you have certain stuff left over from yours let us know thanks. he's trying to do a budget build on the car being in college. let me know please thanks
par12730@sbcglobal.net


Edited by hulmule (08/04/17 04:19 PM)
_________________________

1969 Dodge Coronet R/T Convertible
1979 LiL Red x2
2012 Yellow Jacket
2006 mega cab

Top
#2341731 - 07/22/17 09:20 PM 70 340 challenger a/c pullys [Re: moparts]
mikeporp Offline


Registered: 05/13/14
Posts: 91
Loc: pa
Looking for the correct a/c pullys for a 1970 340 challenger. I have the alternated one.
Thanks
Mike
_________________________
1970 challenger convertible

Top
#2341859 - 07/23/17 08:18 AM Re: 70 340 challenger a/c pullys [Re: moparts]
ct440rod Offline
enthusiast

Registered: 08/26/08
Posts: 264
Loc: Milan Ohio
I'm looking 70 T style jack for a challenger. Let me know what you have. Thanks for the ad.

thanks
Gregg

Top
#2343111 - 07/25/17 01:50 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
BcudaChris Offline
member

Registered: 03/31/05
Posts: 144
Loc: Colorado front range
Left LCA with Sway Bar tab. In need of rebuild OK, not bent.

Thanks

Top
#2345199 - 07/29/17 10:24 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
Silver70 Online   tonguue
I Live Here

Registered: 02/01/03
Posts: 17609
Loc: Rust Belt, SW PA
Wanted AAR cuda hood, repop is all I need... would take an original if price is right. Could pick up at the nats or will pay to ship. PM me
_________________________
68 Road Runner, 69 Belvedere, 71 Challenger Vert
340 barracuda, 01 Ram CTD, 95 Ram, 04 Ram, 85 Daytona turbo Z
99 Trans Am, 66 GTO, 06 Magnum RT AWD

Top
#2345814 - 07/30/17 04:20 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
Tooldude Offline
mopar

Registered: 01/23/09
Posts: 490
Loc: So Cal
Need a hi beam and a lo beam head lite buckets for a Dodge Challenger
Need a hood sticker. Bolts to the hood right by the safety latch, and it's for the same 70 challenger. Cell 818.425.3957 or tooldude6464@sbcglobal.net thx

Top
#2346132 - 07/31/17 09:28 AM Wanted: Power Window Relay [Re: moparts]
Icarus38376 Offline
member

Registered: 06/03/12
Posts: 59
Loc: South East, PA
******FOUND IT....THANKS MOPARTS******
ISO a Power Window Relay part number 2932834.
Thanks,

Pete
717-490-4879


Edited by Icarus38376 (08/03/17 03:35 PM)

Top
#2346324 - 07/31/17 04:38 PM looking for a right rear wheel lip molding [Re: moparts]
340swing Offline
enthusiast

Registered: 07/19/08
Posts: 264
Loc: Ct, Oxford
Looking for a a right rear wheel opening molding for a 1970 cuda. Looking for an OE part scratches ok going to send it out to be polished. Will buy a pair if needed. Please pm or text to 2032064967 Brian

Top
#2346567 - 08/01/17 06:21 AM Re: looking for a right rear wheel lip molding [Re: 340swing]
convertcuda Offline
mopar

Registered: 10/02/07
Posts: 522
Loc: Wausau Wi
I'm looking for a super clean 71 Thermoquad 4972s carb for a 71 car. If you have one and you want to sell please let me know.

Also looking for a master cylinder with 3461187 casting. Fits 71 Cuda with disk brakes.

Also looking for a mint rally dash light bar for a 70 cuda

Ken 715-432-5080 text or call or convertcuda@gmail.com


Edited by convertcuda (08/03/17 12:50 PM)

Top
#2347824 - 08/03/17 10:56 AM Re: E Body - Parts Wanted - Dash pad with AC [Re: tx9cuda]
glenngomango Offline
enthusiast

Registered: 06/25/06
Posts: 332
Loc: Maryland

71-74 version, challenger or barracuda with ac vents. Must be mint original factory pad.pm or call 301-602-2465 thanks

Top
#2350479 - 08/07/17 11:46 PM Wanted - shaker baseplate adapter ring [Re: moparts]
SSAHfan Offline
mopar

Registered: 01/27/06
Posts: 618
Loc: B.C.
Looking for a steel shaker baseplate adapter ring...... doesn't need to be perfect.

Best to PM me here.

Top
#2350843 - 08/08/17 03:26 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: SSAHfan]
B5Cuda440-6 Offline
mopar

Registered: 08/30/15
Posts: 503
Loc: Indianapolis, IN
Looking for an original driver's side tail lamp ground wire for a 70 Cuda. See the engineering print below for reference of the wire I'm trying to find. All 70 Cuda's were equipped with this and the part number is stamped in the wire casing - 2983866.

Please PM or e-mail at robert.traina@roche.com if you have a good, usable wire that is not frayed, broken, damaged, etc.

Thank you.


Attachments
2017-08-08_15-22-46.jpg



Top
#2352405 - 08/11/17 12:39 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
Triggerfish Offline
top fuel

Registered: 07/25/05
Posts: 1824
Loc: Blairsden, CA
Need parts for 70 Challenger Convertible (prefer show quality):
Passenger side outer A pillar trim including upper corner piece
Passenger side inside A pillar trim upper corner
show quality hood front trim moulding
show quality hood REAR trim moulding (super hard to find)
front grille long lower valence OR complete grille assy
rear pass side tail light bucket
rear back up light complete assy incl lense (show quality)
PM me for contact info & thanks in advance.

Top
#2352410 - 08/11/17 12:51 PM Wanted Holley R4734A [Re: moparts]
BS27ROB Offline
enthusiast

Registered: 04/14/05
Posts: 269
Loc: PA
Looking for a Holley R4734.

Top
#2353330 - 08/13/17 05:46 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
VCODE Offline


Registered: 01/10/06
Posts: 1841
Loc: New York
Looking for a 70 Cuda Tube type Jack assembly. Hoping for date code 0A Jan 1970 /0B Feb 1970 /0C Mar 1970
Pm or cell 914-843-9617
Bob


Edited by VCODE (08/13/17 06:11 PM)
_________________________
Mom & Dad let me buy a brand new 70 Challenger R/T 440 Six-Pack Super Trac Pack when I was 17 (Robert what is a 440 Six-Pack)

Top
#2353349 - 08/13/17 06:55 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
76orangewagon Offline
member

Registered: 01/06/12
Posts: 45
Loc: Akron, ohio
I am looking for a good used set of OEM 70-74 E body front frame rails either. I do not need full rails, cut off just forward of the firewall is ok. I am looking for both sides. I am also looking for a rear driver side frame rail section from behind the wheel well arch to the back cross member. I know they make these aftermarket but would like to find some good rust free factory metal before going the aftermarket route. Please PM me.

Thank you,
Ross

Top
#2355810 - 08/17/17 10:23 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
biggE Offline
mopar

Registered: 12/08/04
Posts: 695
Loc: California
Wanted: I'm looking for a Thermoquad carburetor #4973 core or even the base with throttle shafts that are not frozen up or pitted. If you have something PM me or eric0890@att.net. Thanks

Top
#2356778 - 08/19/17 06:41 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
1964hemi Offline
enthusiast

Registered: 09/18/03
Posts: 392
Wanted 1970 1971 original Inflate a spare blue bottle bracket and and wing nut.


Thanks

jandlwalters@sbcglobal.net

Top
#2357850 - 08/21/17 08:47 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
ah1s Offline
member

Registered: 01/22/04
Posts: 55
Looking for an original mint 71-74 ebody dash pad in black. No ac single speaker thanks.

Top
#2358584 - 08/23/17 12:30 PM WANTED: Drivers weatherstrip molding for E body Convertible [Re: moparts]
isettakurt Offline
member

Registered: 11/14/09
Posts: 22
Loc: Metro Detroit,Michigan
WANTED: 70-71 e body CONVERTIBLE Drivers Side A piller weatherstrip molding.
THanks,Kurt
isettakurt@gmail.com

Top
#2358680 - 08/23/17 03:59 PM Re: WANTED: Drivers weatherstrip molding for E body Convertible [Re: moparts]
MONC Offline
master

Registered: 04/08/04
Posts: 2829
Loc: The Historic Hudson Valley
WANTED :
CONSOLE MOUNTED CASSETTE PLAYER WITH PEDESTAL , HOUSING and MOUNTING BRACKET

THanks for the ad Tom.
_________________________
Mopar
Or
No
Car

Top
#2359130 - 08/24/17 11:55 AM Wanted: Seat Hinge Shoulder Bolts and washers [Re: moparts]
mike mike mike Offline
member

Registered: 07/18/17
Posts: 1
Loc: New Hampshire
*** Found Them! Thanks! *****

Dug up an old thread here and contacted Byron Fettig and 69440 who were noted as possibly having these but no luck so far. Looking for 2 shoulder bolts, 2 washers with the 4 indents around the center and 2 inner soft washers for a 71 e body bucket seat hinge / pivot.

Also looking for the strike plate and screw for the lower portion of the bucket seat. Its where the spring from the upper rests and looks like a plated washer with a beveled center hole.

If you have these items please email me at michael.emond@me.com
thanks!
Mike


Edited by mike mike mike (08/28/17 03:14 PM)

Top
#2359830 - 08/25/17 05:18 PM WTB: Fan clutch 2863260 for 70 Challenger [Re: biggE]
tyretr Offline
member

Registered: 01/04/09
Posts: 21
Loc: Beeper Bay, Wisconsin
I am looking for a good used or NOS Chrysler fan clutch. Part number 2863260. The fan clutch is for a 70 Challenger with 440, auto and A/C. If you can help PM me here. Thanks Moparts!
_________________________
70 V code EK2 Hardtop Road Runner 70 N code B5 Convertible Road Runner 68 4 speed QQ1 Convertible GTX

Top
#2360737 - 08/27/17 05:36 PM WANTED - 1970 E-body 3-speed reverse lockout rod [Re: moparts]
Alaskan_TA Online   content
Fluffy Balladeer

Registered: 01/20/03
Posts: 25829
Loc: Still moving in.
WANTED - Does anyone have one or two of these that they would like to sell?

It is a 1970 E-body reverse lockout rod for a three speed manual transmission that goes from the R/L shift arm on the transmission up to the column arm.

If you have one or more to sell, please email me at sixpak340(insert at symbol here)att.net with a photo & price?


Attachments
D13 1970 E-body reverse lockout rod.JPG



Top
#2361068 - 08/28/17 09:34 AM Re: WANTED - Lug Wrench/Tire Iron [Re: Alaskan_TA]
Erik Offline


Registered: 01/20/03
Posts: 3220
Loc: Stroudsburg, PA
I need a lug wrench/tire iron for my '70 Challenger R/T. Anyone have an extra they are willing to sell?

PM me here.

Thanks!
_________________________
1970 Challenger R/T SE 383 Auto
1968 Barracuda Convertible - 416 4-spd

Contrary to the opinions of some, I am not dumber than I look.

Top
#2361961 - 08/29/17 07:47 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
mopar_muscle Offline
member

Registered: 06/27/07
Posts: 133
Loc: Idaho, USA
Looking for trim clips for the SE finish panel and belt molding around the windows. contact me at mopar_muscle76@yahoo.com

Top
#2362513 - 08/30/17 06:45 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
BldMnyCuda Offline
member

Registered: 12/02/15
Posts: 7
Loc: NJ
Looking for a black plastic plug for the seat belt retractor cover for a 71-72 e & b body. Also looking for an original (blue) date correct inflator can and bracket and a gas cap for a late production (5/28/71) cuda. Thanks, Rich (609 )709-9083.

Top
#2362730 - 08/31/17 06:32 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1257
Loc: Sweden
Looking for grill support for 70 challenger .. pm here or email to:

Nicklas-780@hotmail.com

Top
#2362942 - 08/31/17 03:00 PM 70 E Body 4 Speed Console [Re: 71redcuda]
ricobuggy Offline
member

Registered: 08/13/13
Posts: 99
Loc: St. Charles, IL
Looking for a 70 E Body 4 Speed Console in driver condition.
Let me know what you have.
Thanks.
Rich

Top
#2364611 - 09/03/17 12:46 PM Wanted - drivers side door panel [Re: moparts]
SSAHfan Offline
mopar

Registered: 01/27/06
Posts: 618
Loc: B.C.
Looking for a drivers side door panel in black with manual window for a 70 Barracuda in good to excellent condition.

Best to PM me here.

Top
#2365807 - 09/05/17 12:41 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
n96cuda Offline
member

Registered: 09/05/03
Posts: 160
Loc: indiana
Looking for a hemi k frame for e-body. Original or good quality reproduction is ok.

Ebodyjoe@aol.com

Top
#2366925 - 09/07/17 11:17 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
1mean340 Offline
enthusiast

Registered: 10/09/08
Posts: 282
Loc: Suffolk County, New York
WTB passenger fender for 70 challenger. I really only need the first 8 inches or so from the nose trim back, looking to make a patch.
_________________________
B5 '70 Challenger. 340/727A. In the works- '70 LA block, hughes stud girdle, factory forged crank, Eagle H beam rods, Speed Pro forged pistons, ported W2 econos, D1SC Procharger, front mount intercooler, Aeromotive A1000 fuel system, E85 fed via FITech 1200 fuel injection.

Top
#2367882 - 09/09/17 11:04 AM WTB- non AC heater box cover with door [Re: 76orangewagon]
440PURSUIT Offline
pro stock

Registered: 12/17/04
Posts: 1323
Loc: DC, MD Suburbs
Need the outer box shell with the door. Could use clips too if you have them. Will pay fair price

Thanks
_________________________
1966 Hemi Belvedere II,
1968 Hemi Road Runner,
1969 Hemi Charger R/T,
1970 440 6pack Superbird,
1968 Fury I Police Pursuit 440 Super Commando 2 door sedan (Black/Blue)

Top
#2368787 - 09/11/17 11:05 AM Re: WTB- non AC heater box cover with door [Re: moparts]
Silver70 Online   tonguue
I Live Here

Registered: 02/01/03
Posts: 17609
Loc: Rust Belt, SW PA
Need a lower right dash trim/molding, the L shaped piece opposite of lower driver side... goes around the radio area. Any color, doesn't need to be anything great... will dye if needed. Don't want to spend over 50 for one. Pm me
_________________________
68 Road Runner, 69 Belvedere, 71 Challenger Vert
340 barracuda, 01 Ram CTD, 95 Ram, 04 Ram, 85 Daytona turbo Z
99 Trans Am, 66 GTO, 06 Magnum RT AWD

Top
#2370901 - 09/14/17 06:03 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
quill Offline
member

Registered: 04/09/07
Posts: 76
Loc: ny
Wanted 1970 Cuda Front Bumper Brackets . Thanks Moparts

E-mail jany63@optonline.net


Edited by quill (09/14/17 06:05 PM)

Top
#2372112 - 09/17/17 08:21 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: quill]
superbird Offline
enthusiast

Registered: 01/21/03
Posts: 240
Loc: milwaukee
WANTED 70 CHALLENGER DASH PAD CORE
_________________________

Top
#2372495 - 09/17/17 11:29 PM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
RP's R/T's Offline
mopar

Registered: 07/15/05
Posts: 609
Loc: SE Wisconsin, USA
WANTED-
E-Body Drivers Side Door Latch.
1970 preferred. (has secondary small latch arm)
Cannot have damage from striker.
PM, or email: priem89@gmail.com with pictures.

Top
#2373132 - 09/19/17 01:08 AM WANTED: E body A/C Line clamp w/ screw [Re: moparts]
isettakurt Offline
member

Registered: 11/14/09
Posts: 22
Loc: Metro Detroit,Michigan
WANTED: '70-'71 E body A/C line ROUND CLAMP located by the fender tag with screw.
Thanks,Kurt
isettakurt@gmail.com

Top
#2373354 - 09/19/17 01:32 PM Re: WANTED: E body A/C Line clamp w/ screw [Re: moparts]
1964hemi Offline
enthusiast

Registered: 09/18/03
Posts: 392
WANTED:

E body space saver blue bottle bracket.


Thanks

jandlwalters@sbcglobal.net

Top
#2373479 - 09/19/17 05:10 PM Re: WANTED: E body A/C Line clamp w/ screw [Re: moparts]
KZ4406 Offline
member

Registered: 05/05/15
Posts: 46
Loc: WV
WANTED:

OE headliner for '70 Challenger,

thanks

Top
#2375004 - 09/22/17 11:13 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5003
Loc: NJ
Original 1970 440 HP carb, part number 4737, excellent original condition including the idle solenoid and original ID tag. I have parts for trade if your looking for something or will purchase.

Email Kenei@comcast.net

Top
#2375007 - 09/22/17 11:15 AM Re: E Body - Parts Wanted - 3rd Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5003
Loc: NJ
NOS 1970 Cuda tail light harness. I have some parts for trade or can purchase.

Email Kenei@comcast.net

Top
#2377579 - 09/27/17 07:48 AM 1970-1 E Body 4 Speed Pedals [Re: moparts]
44D6PAKCUDA Offline
top fuel

Registered: 01/21/03
Posts: 1909
Loc: Land of 10,000 Lakes
I am looking for a clean,rust pit free 1970-1 E Body 4 speed pedal set up.Need a set that has not been blasted as I want to restore to original OE bare metal finish.Must be the HP version with the roller bearing inside the clutch pedal.Let me know what you might have.Would pay up to 1K for the right part.PM me here or email jim@heartlandtire.net

Top
Page 1 of 3 1 2 3 >

Advertisement
Sponsored Link
Forum Stats
24,899 Registered Members
32 Forums
184,275 Topics
2,134,950 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Carburetor spacers for heat
by RAY1969CARS
10/20/17 10:35 PM
Question about SVO rear brakes, Dana S60, Dr. Diff/Strange
by TomsCharger70
10/20/17 10:27 PM
Stamped number on car
by toplescuda
10/20/17 10:12 PM
how to remove accelerator cable from the floor
by moparpro
10/20/17 08:04 PM