Page 1 of 8 1 2 3 4 5 6 7 8 >
Topic Options
#2329551 - 07/01/17 08:57 AM B Body - Parts Wanted - 3rd Quarter
moparts Offline


Registered: 01/19/03
Posts: 13760
Loc: Norwich CT USA
up

Top
#2329587 - 07/01/17 09:17 AM WANTED - 1970 B-body 3-speed manual floor shift linkkage [Re: moparts]
Alaskan_TA Online   content
Fluffy Balladeer

Registered: 01/20/03
Posts: 25829
Loc: Still moving in.
1970 B-body 3-speed manual floor shift transmission linkage wanted, prefer a full set with the column interlock parts included.

Please email sixpak340(insert at symbol here)att.net with photos & price.

UPDATE - I have found the column interlock parts including the rod that connects to the arm on the transmission, so now I need the parts from there back.


Edited by Alaskan_TA (07/06/17 04:28 PM)
Edit Reason: update

Top
#2329696 - 07/01/17 11:31 AM 1970 B-body horn cap [Re: moparts]
NANKET Offline
master

Registered: 12/13/03
Posts: 3640
Loc: northwest USA
Burnt orange horn cap for B-body woodgrain steering wheel


Attachments
image.jpg



Top
#2329775 - 07/01/17 01:42 PM Re: 1970 B-body horn cap [Re: NANKET]
biggE Offline
mopar

Registered: 12/08/04
Posts: 695
Loc: California
Wanted: 22 inch radiator part # 2998960
Also 1970 383 auto distributor # 3438233
If you have either PM me or eric0890@att.net. Thanks

Top
#2329897 - 07/01/17 06:03 PM Re: 1968 Hemi glove box manuals [Re: moparts]
RAH Offline
master

Registered: 08/18/03
Posts: 4939
Loc: sw chicago
wanted glove box manuals for 1968 dodge charger, Dodge Super Bee/R/T and Plymouth Roadrunner-GTX Hemi autos only. Bob H 708 687 1187


Attachments
hemi_books.JPG




Edited by RAH (07/01/17 06:05 PM)
Edit Reason: picture and heading
_________________________
RAH@wowway.com

Top
#2329899 - 07/01/17 06:08 PM Re: 1968 15 inch hubcap wanted [Re: moparts]
RAH Offline
master

Registered: 08/18/03
Posts: 4939
Loc: sw chicago
wanted 15 inch Hubcap silver color 1968 dodge charger NOS MOPAR only needed bob h 708 687 1187


Attachments
Hemi hubcap.JPG




Edited by RAH (07/01/17 06:12 PM)
Edit Reason: heading and picture
_________________________
RAH@wowway.com

Top
#2330240 - 07/02/17 03:02 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
440mopar Offline
mopar

Registered: 08/24/07
Posts: 504
Loc: USA
Wanted: 1971 style gull wing. I would like an original but will consider a reproduction.

fourfortymopar at yahoo.com

Top
#2330450 - 07/02/17 10:13 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Bull1tt Offline
pro stock

Registered: 01/31/05
Posts: 1369
Loc: Pgh, PA
Wanted: 64-5 b-body two door sedan quarter panel front section to wheel tubs. Can meet at Mopar Nats. PM me here. Thanks, Don

Top
#2330605 - 07/03/17 10:01 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
1rustedrt Offline
member

Registered: 12/24/04
Posts: 108
Loc: martinsville Indiana
wanted" a 1969 air grabber air cleaner for a 440. wanting to work out a trade for a 70-72 383-400 air grabber air cleaner base original OEM not a reproduction . thats been bead blasted and repainted no dents. if any one is interested email me at rdapr17557@aol.com or call 317 501 1405 . thanks Joe

Top
#2330931 - 07/03/17 05:23 PM Re: WANTED: 1971 brown seat belt buckles [Re: moparts]
chargerfrank Offline


Registered: 07/19/14
Posts: 4
Loc: ohio
driveshaft for 1970 road runner 6pack 50.390 long centerline 3.25 diameter large yoke , please e-mail chargerfrank@aol.com and leave ph. # or call 440-7595-6695 for frank

Top
#2331060 - 07/03/17 09:01 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Tsmithae Offline
member

Registered: 09/27/10
Posts: 81
Loc: Illinois
Drip rail trim corners for 1968-70 Charger. I need both sides after misplacing mine... PM me here with what you have.

Top
#2331220 - 07/04/17 08:27 AM WANTED 1965 Coronet Wagon Roof Rack [Re: Tsmithae]
Jet Doc Offline
enthusiast

Registered: 03/02/07
Posts: 209
Loc: Wisconsin
Looking for a 65 Coronet Wagon luggage/roof rack. Thanks!

Top
#2331357 - 07/04/17 11:58 AM 66 Plymouth Belvedere I Wagon [Re: moparts]
6pkRB Offline
enthusiast

Registered: 07/29/06
Posts: 311
Loc: Texas
I need the outside lower aluminum body trim molding for the doors and rear quarters. Let me know what you have. Can e-mail me at randy@randybuntyncpa.com.

Thanks for the help!

Top
#2331408 - 07/04/17 01:08 PM Re: 66 Plymouth Belvedere I Wagon [Re: moparts]
mopars4life Offline
super stock

Registered: 08/08/04
Posts: 711
Loc: Virginia
Need a 3 spoke Green steering wheel center cap for the optional 3 spoke wood-grain wheel. This is for a 69 Dodge Charger. I can trade a nice black one for a nice F8 Green one with the tri-bar dodge logo.

Top
#2331972 - 07/05/17 01:54 PM Re: 66 Plymouth Belvedere I Wagon [Re: moparts]
71sat440 Offline


Registered: 06/07/03
Posts: 13764
Loc: Willow Grove PA
71 plymouth b body upper cowl preferably the kind with the push in screens. May possibly want driver side a pillar and first corner of roof.

Going to carlisle in a few weeks, if your going and will have one or have one and willing to ship drop me a pm.

Top
#2332022 - 07/05/17 03:40 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
vegiguy Offline
member

Registered: 07/17/10
Posts: 1
Loc: Kansas
Wanted: 1973-74 Roadrunner/Satellite trunk lid and rear wheel lip body moldings. Willing to pay for shipping to have them shipped or to pick them up in person if within driving distance.

Top
#2332273 - 07/05/17 11:01 PM 67 Belvedere II parts wanted [Re: vegiguy]
IROC78 Offline
member

Registered: 02/21/06
Posts: 63
Loc: MI
Hi, I am needing a driver quality front bumper, front fender emblem inserts, and body colored gas cap for a 67 Belvedere II. Please email me at bbisek@aol.com if you have anything. Thank you,

Top
#2332305 - 07/06/17 12:10 AM 1962-64 Dodge Door Sill Plates [Re: moparts]
C_B5 Offline
super stock

Registered: 01/22/04
Posts: 966
Loc: Ohio
Wanted Dodge Door Sill Plates for a 2-door

Must have the stamped pattern like the ones in attached photo
The door sills measure 42" in length

Will buy singles or pairs as long as the parts are in nice condition

These door sills were used on the full size 1962-64 Dodge 880 and Custom models.

Send PM or email c-b5@zoominternet.net


Attachments
Door Sill.jpg



Top
#2333003 - 07/07/17 10:08 AM Re: 1962-64 Dodge Door Sill Plates [Re: moparts]
Magnumguy Offline
master

Registered: 01/19/03
Posts: 9758
Loc: S.E.Ohio
WANTED: Mopar factory CB microphone(s).

There's 2 styles, I prefer the slimmer one, other looks more "military". Will consider either.

PM or magnumguy78@gmail.com
_________________________
"Multiple Magnum owner since 1978!!"


Top
#2333008 - 07/07/17 10:13 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Magnumguy Offline
master

Registered: 01/19/03
Posts: 9758
Loc: S.E.Ohio
WANTED: 1978-79 Dodge Magnum parts:
One piece to whatever. No engine/trans stuff.
Mainly interested in ext/int trim.

PM me or magnumguy78@gmail.com

Thanks in advance.
_________________________
"Multiple Magnum owner since 1978!!"


Top
#2333968 - 07/09/17 08:05 AM Wanted B-Body Clutch Pedal Assembly [Re: moparts]
billy1722 Offline
member

Registered: 10/20/13
Posts: 19
Loc: Illinois
Looking for a 1969 B-Body Clutch and Brake Pedal assembly, please contact if you have one for sale, or if you know where I might find one. Thanks

Top
#2335208 - 07/11/17 08:50 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
moparpro Online   content


Registered: 03/08/15
Posts: 391
Loc: georgia
69 roadrunner 383 magnum 26 inch radiator.

Top
#2335321 - 07/11/17 12:05 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
69_SIX_PACK Offline
master

Registered: 01/19/03
Posts: 8937
Loc: Brantford Ontario
I am looking for a nice original Dodge side scoop from a 1969 Super Bee or Coronet R/T.
Only looking for the drivers side but will consider buying a pair .
The part number on the scoop I am looking for is: 2902967

I will be at Carlisle this weekend.

Please PM me here.

Thank you,
Dave


Attachments
Side Scoops.jpg



Top
#2335453 - 07/11/17 05:26 PM 1966 Plymouth Belvedere I Wagon Parts [Re: moparts]
6pkRB Offline
enthusiast

Registered: 07/29/06
Posts: 311
Loc: Texas
I need the lower outside aluminum trim from the front door to the back for the 66 plyouth belvere I wagon. Please e-mail me at randy@randybuntyncpa.com with what you have.

Thanks Moparts

Top
#2337524 - 07/15/17 05:30 PM Re: 1966 Plymouth Belvedere I Wagon Parts [Re: moparts]
71rm23 Offline
top fuel

Registered: 01/04/08
Posts: 2261
Loc: None
Looking for the plastic cover for factory, on the floor, cassette player for a '71 B Body.

Thanks

Top
#2337570 - 07/15/17 07:17 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
1968 Charger B5 Offline
member

Registered: 12/15/06
Posts: 145
Loc: MA
Looking for non-ac heater box, dash controls and etc for 68 charger.

I have an original ac one willing to trade. Or straight up will purchase.


Rick
781 975 0321
richardbpellegrino@gmail.com
_________________________
1968 Dodge Charger R/T 1970 Dodge Charger Daytona 1998 Jeep Cherokee

Top
#2337605 - 07/15/17 09:11 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
gtxno1 Offline
member

Registered: 11/05/13
Posts: 2
Loc: central new jersey
wanted to buy 1967 gtx/satellite good used fuel cap trim ring

Top
#2337738 - 07/16/17 10:29 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
70 buzz Offline
top fuel

Registered: 06/12/07
Posts: 1746
Loc: michigan
Looking for these parts for bumper fillers on a 70 coronet


Attachments
IMG_0106.JPG



Top
#2338033 - 07/16/17 08:23 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: rr70]
69 charger man Offline
enthusiast

Registered: 11/10/06
Posts: 349
Loc: NJ
Hi. Im looking for an orginal 68-69 square tach for a roadrunner. Any condition. Please pm me . Thankyou

Top
#2338208 - 07/17/17 07:11 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Big D A12 Offline
enthusiast

Registered: 02/14/13
Posts: 227
Loc: Wisconsin
Looking for a 1969 383-440 Bell housing. Casting date code must be a March or April piece. Willing to pay fair market price. Please email me pictures of what you have.

Thanks for the post MOPARTS - D


Attachments
Bell Housing.jpg


_________________________
Seeking 1969 Lynch Road fender tags/Build Sheets/Window Stickers/VIN - Over 2300 so far thanks to you!!
2018 Demon Challenger PY4 A8 Black Hood
2017 Jeep Trail Hawk
2016 Hellcat Challenger PCP A8
1969.5 A12 Super Bee WM21 V1H F6 D21
1969 Coronet RT B5 D32 M46 N96

Top
#2338564 - 07/17/17 05:41 PM Re: B Body - Parts Wanted - '70 GTX tail panel trim [Re: moparts]
scattershield Offline
member

Registered: 05/09/05
Posts: 82
Loc: Maryland
Looking for the long lower piece that goes below the tail lights and the upper trunk piece.
_________________________
sonoramic413@gmail.com

1961 Plymouth Sport Suburban Station Wagon,
1965 Plymouth A990 Clone,
1972 Plymouth Duster 340's(2)(One FE5, the other TX9),
1970 Plymouth GTX,
2009 Dodge Challenger R/T Classic (B5 Blue)

Top
#2338625 - 07/17/17 07:11 PM Re: B Body - Parts Wanted - '70 GTX tail panel trim [Re: moparts]
TNyoungun Offline
member

Registered: 03/21/11
Posts: 2
Loc: tn
Looking for a 1970 b-body radio. Working or not, with or without knobs. Thanks

Top
#2338963 - 07/18/17 09:46 AM Re: B Body - Parts Wanted - '70 GTX tail panel trim [Re: moparts]
CKessel Offline
enthusiast

Registered: 01/13/10
Posts: 320
Loc: Ramona, Ca
Looking for a front bumper on a 65 Coronet. Does not have to be perfect other than the center section between the bumper bolts/frame rails. Outer portions can be damaged, chrome can be bad. Just need the center section which has the opening for the license plate. Am going to be cutting/modifying mine and need to graft some material in. PM me with cost including shipping to 92065 zip. Can travel up to 3 hrs away from home. I live about an hour north east of San Diego Ca. May have some of my cast off parts to trade if you want.
_________________________
Carl Kessel

Top
#2338971 - 07/18/17 10:03 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
tdmoparguy Offline
member

Registered: 04/17/15
Posts: 19
Loc: Tulsa, Oklahoma
WTB: 1969 B-body 4-speed floor hump for my '69 Charger. I'm not interested in repops. 9186197928 text is preferred or email me on here. I'm located in Tulsa Oklahoma 74107.

Top
#2338988 - 07/18/17 10:27 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: tdmoparguy]
sixpackbee Offline
master

Registered: 11/02/03
Posts: 2923
Loc: Western New York
I am in need of reasonably priced front and back bench seat cores for a 4 door 66/67 b body. Also could use a left side front door to cut up. Just need the latch area where mine is broken. Going to Norwalk on the 29th. Might be going to the Nats too. e mail hek@supercarrestorations.com Thank you.

Top
#2339123 - 07/18/17 01:04 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Red64Savoy Offline
member

Registered: 11/16/16
Posts: 1
Loc: Pennsylvania
Thanks, found one!!


Edited by Red64Savoy (08/25/17 09:21 PM)

Top
#2339238 - 07/18/17 03:55 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
krautrock Offline
pro stock

Registered: 01/27/03
Posts: 1415
Loc: central texas
anyone have a pair of b-body (1967) lower control arms in nice rebuildable condition?
sway bar tabs are not needed.


EDIT: looks like i've got a deal worked out. thanks moparts.


Edited by krautrock (07/20/17 05:04 PM)

Top
#2339284 - 07/18/17 05:22 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
batt2rm Offline
mopar

Registered: 08/17/03
Posts: 427
Loc: upstate NY
Looking for 68-70 Dodge Charger wiper arm pivot bases that hold the wiper arms and bolt to the cowl.

Top
#2339388 - 07/18/17 08:41 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: batt2rm]
1969gtx Offline
mopar

Registered: 02/05/06
Posts: 498
Loc: southern conn
looking for a nice 1968-70 b body right vent window frame will take one with very miner imperfections contac william.atwood@snet.net
thanks bill
_________________________
1965 A/FX Plymouth 9.50 et @139 mph
1965 A/FX awb plymouth flashback [email]10.26@129mph[/email] mph on pump gas 426 hemi
1969 GTX Hemi 4 speed 12.50 et @ 112mph in Supercar trim 12.32 113 on slicks
1970 GTX 4406pac 4 speed 11.21 @126.9 mph in supercar trim

http://www.AFXER.com

Top
#2339629 - 07/19/17 09:48 AM Re: B Body - Parts Wanted - 69 GTX/SAT/RR Rear Bumper Guards [Re: moparts]
moparnation74 Offline
member

Registered: 02/03/17
Posts: 14
Loc: Texas
I am needing a pair of rear bumper guards for a 69 Plymouth GTX/RR/SAT

No pitting on the exterior and no broken studs

I will pay top dollar for the correct pair in the condition above

Top
#2340289 - 07/20/17 10:55 AM 68 Charger tail panel piece [Re: 74charger07ram]
sixpackbee Offline
master

Registered: 11/02/03
Posts: 2923
Loc: Western New York
I am in need of the left side upper portion of the tail light panel for a 68 Charger. If you are going to be at Norwalk next week and have one it will save me from buying an AMD one to just cut out the little piece I need. Sort of a waste doing that but may have too. E mail hek@supercarrestorations.com Thanks.

Got one coming.


Edited by sixpackbee (07/26/17 01:08 PM)

Top
#2340742 - 07/20/17 11:00 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Crycho Offline
super stock

Registered: 10/07/03
Posts: 995
Loc: klienburg, ONT
Wanted: baseplate for a 1970/71 Six Pack and Hemi cars without fresh air, it must have the front shield/dust cover. thanks


Edited by Crycho (07/21/17 08:55 PM)
_________________________
Fight the Good Fight- Elastomeric Bumpers and Shaker kits

Top
#2340770 - 07/20/17 11:47 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
CompSyn Offline
super stock

Registered: 04/24/08
Posts: 1078
Loc: Pacific NW USA
WANTED: Fender Bolts, Nuts, Studs, 69 B-Body, Factory Original

Working on my 69 Road Runner, I’ve mapped out about six fender fasteners I need to bring the car back to a factory fresh look. I’d prefer to find good original and not use reproduction stuff. If anyone has a 68 or 69 B-Body parts car I could send pics of what the items look like, where they are found on the car and what the dimensions are.

Let me know,

Thanks!
_________________________
Project 1969 Plymouth Road Runner 383/727/3.23 F5

Top
#2342181 - 07/23/17 09:01 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: CompSyn]
sixpackbee Offline
master

Registered: 11/02/03
Posts: 2923
Loc: Western New York
I need of the block off plate used on 68 rallye dash instrument panel. E mail hek@supercarrestorations.com
Got one!


Edited by sixpackbee (09/07/17 12:35 PM)

Top
#2342268 - 07/24/17 12:02 AM Wanted: Speedo gear, 39 tooth, green [Re: moparts]
70runner Offline
super stock

Registered: 01/25/03
Posts: 997
Loc: Avocado country
39 tooth speedo gear (green) for 69 Charger 727, decent used is fine


Edited by 70runner (07/24/17 12:02 AM)

Top
#2342395 - 07/24/17 11:17 AM Wanted [Re: moparts]
RoadRunner73 Offline
member

Registered: 10/15/05
Posts: 173
Loc: PA
Looking for a set of the Hi-Flow Tri-Y Under Chassis B/RB Headers that Schumacher sells. Used their motor mount kit to install a 440 in a small block and need a set for clearance...


Edited by RoadRunner73 (07/24/17 11:42 AM)
_________________________
-----
1973 Plymouth Road Runner

Top
#2342649 - 07/24/17 06:11 PM Re: Wanted [Re: RoadRunner73]
RapidusMaximus Offline
top fuel

Registered: 06/04/03
Posts: 1755
Loc: Haslet, Texas
Looking for a 68 GTX hood release lever, Sport Satellite might work but I know normal Satellite, Belvedere, Road Runner won't work due to GTX grille interference. Below is a pic of what am using off of a 68 Belvedere, as you can see it is inçorrect. PMe here, or email alilblacktruckatgmaildotcom thanks


Attachments
IMG_20170725_180723.jpg




Edited by RapidusMaximus (07/25/17 07:23 PM)
_________________________
1968 Plymouth GTX 440 4 Speed Dana
1973 Small block Duster under construction
1974 Dodge P/U Long Bed Stepside 318 Auto
1975 Jeep CJ5
2016 Dodge Ram Hemi 1500

Top
#2343726 - 07/26/17 01:25 PM 6 BBL Decals [Re: moparts]
Droop69 Offline
mopar

Registered: 02/19/11
Posts: 457
Loc: MN
Looking for an original set of 6BBL '69 1/2 hood decals for my Road Runner. PM here or text me.

Found them! Thanks Lou!!!



Edited by Droop69 (08/29/17 09:37 AM)

Top
#2344167 - 07/27/17 09:06 AM 69 Headrest Mount Parts [Re: moparts]
cbusters Offline
mopar

Registered: 05/08/05
Posts: 570
Loc: Florida
I need the plastic top pieces, the bezels and the screws for a bucket seat 69 RR headrest setup. If anyone has a partial install set pm me, I need enough for both seats. Already have the inside clips and would rather not buy the whole kit unless I have to.

Top
#2344429 - 07/27/17 04:27 PM Re: Lrg diameter 2 prong door switchs needed [Re: cbusters]
JMCFAN Offline
pro stock

Registered: 08/24/04
Posts: 1347
Loc: New Mexico
Need 2 large diameter 2 prong door switches....for 70 RR


Edited by JMCFAN (07/27/17 04:54 PM)
_________________________
68 Charger 383/ AT Green/Green VT
70 Roadrunner 383/4sp Purple/Black VT

Top
#2344604 - 07/27/17 10:17 PM Re: Lrg diameter 2 prong door switchs needed [Re: moparts]
Bull1tt Offline
pro stock

Registered: 01/31/05
Posts: 1369
Loc: Pgh, PA
Anyone selling used fiberglass body parts for 64-5 b-bodies? I'll be looking at the Nats PM me or email. Thanks, Don

Top
#2344946 - 07/28/17 04:22 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
gtx6970 Offline
I Live Here

Registered: 06/28/03
Posts: 16757
Loc: Land of Booze and Horses
WANTED
1968 Charger hood safety hook / and release / pull handle and the loop that bolts to the bottom side of the hood. These are 1968 and 1969 Charger only pieces.

Top
#2345009 - 07/28/17 07:01 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: gtx6970]
Rhinodart Offline
Rhinotruck

Registered: 01/20/03
Posts: 34824
Loc: Round Lake Beach, Illinoisy
Need a low mileage original gas tank for a 1968 Road Runner. Must be in excellent shape and original non-cleaned outside condition. Please PM me here.

Jim
_________________________
The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.

JB Rhinehart, Realist

Top
#2346018 - 07/30/17 10:36 PM Re: B Body wanted Hemi trans cooler [Re: moparts]
RAH Offline
master

Registered: 08/18/03
Posts: 4939
Loc: sw chicago
Wanted 1966 to 1970 mopar B Body Hemi automatic trans cooler only. bob h 708 687 1187


Edited by RAH (07/31/17 06:25 AM)
Edit Reason: heading
_________________________
RAH@wowway.com

Top
#2346223 - 07/31/17 12:59 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
gtxncuda Offline
enthusiast

Registered: 08/20/03
Posts: 252
Loc: Dearborn, Michigan
Wanted: 69 B body bumper jack assembly for Bel/Sat/RR/GTX. Need base, stand, and mechanism. Just something for appearances sake, not planning to EVER use a bumper jack! Thanks for the ad!
_________________________
1971 Cuda 340 auto
2013 Mustang Boss 302 L/S
1969 Road Runner RM21 440 4 speed

Top
#2346248 - 07/31/17 02:09 PM Wanted 70 road runner horn [Re: moparts]
gretsch Offline
super stock

Registered: 11/04/09
Posts: 1086
Loc: north carolina usa
Wanted good 70 road runner horn pm me or dannysodoma@gmail.com

Top
#2346285 - 07/31/17 03:27 PM Wanted 69 GTX Bumper Mounting Brackets [Re: gretsch]
geary236 Offline
member

Registered: 01/04/07
Posts: 69
Loc: illinois
I'm looking to buy the Front and Rear bumper brackets for a 1969 GTX gearydepue@yahoo.com


Edited by geary236 (07/31/17 03:28 PM)

Top
#2346362 - 07/31/17 06:29 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: gtxncuda]
rr70 Offline
member

Registered: 08/29/08
Posts: 93
Loc: Ozark,Mo
Contact the buyer!!!!!! THIS IS NOT A DISCUSSION FORUM!!


Edited by tboomer (07/31/17 08:15 PM)
Edit Reason: not a discussion forum

Top
#2346735 - 08/01/17 01:33 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
bbtrux Offline
super stock

Registered: 05/03/04
Posts: 772
Loc: ohio
FOUND. 68-70 B- body. I need a clean inner support for an upper control arm, this being the piece that spotwelds to the shock mount apron, and the upper control arm bolts go through and locates the inside cams. Call 419-512-1612, or e mail rocknwrench@gmail.com. Thank you. FOUND.


Edited by bbtrux (08/05/17 03:32 PM)

Top
#2346833 - 08/01/17 04:57 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Hamtramck Offline
mopar

Registered: 01/19/03
Posts: 476
Loc: Boston Ma
Wanted: Nos passenger fender for 69 Roadrunner. Part # 2933664.
Factory primer no damage no stories please. Thanks

Mrhamn@msn.com
_________________________
69 roadrunner conv. 4spd B5/X9

Top
#2347004 - 08/01/17 09:24 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
1hot68 Offline
member

Registered: 11/14/05
Posts: 125
Loc: waukon iowa
Looking for a nice pair of original doors for a 69 gtx. I'm in ne Iowa but am willing to pay shipping if need be. Bodiebmb@rconnect.com

Top
#2347161 - 08/02/17 06:45 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
abodybill Offline
member

Registered: 12/13/15
Posts: 17
Loc: Michigan
Looking for a set of bucket seat hinge covers for my 69 Road Runner with no cracks or chips in them.

PM me if you can help me out.
Thanks,Bill
_________________________
1966 Valiant V100 wagon
1969 Road Runner
1985 D250 pickup

Top
#2347280 - 08/02/17 11:57 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
70HemiShaker Offline
super stock

Registered: 09/26/06
Posts: 783
Loc: Home of the Bluegrass
WTB...trunk hinges for a 69 superbee. Both sides.
Thanks
Found them!


Edited by 70HemiShaker (09/20/17 04:58 PM)
_________________________
"It takes a Mopar to catch a Mopar"
70 Challenger: 472 Hemi, A-855,
& a 3.54 DANA 60
69 Bee..... we will see!


Top
#2347347 - 08/02/17 01:20 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Frankie P Offline
member

Registered: 08/25/07
Posts: 10
Loc: Thomaston, CT
70 Super Bee
Need a good driver quality Pass Side Grille

Top
#2347471 - 08/02/17 06:25 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: 70HemiShaker]
rr70 Offline
member

Registered: 08/29/08
Posts: 93
Loc: Ozark,Mo
Not a discussion board! Last Warning!


Edited by tboomer (08/02/17 08:47 PM)
Edit Reason: not a discussion forum

Top
#2347632 - 08/02/17 10:18 PM 69 "road runner" Door Callouts and Door Locks [Re: moparts]
cbusters Offline
mopar

Registered: 05/08/05
Posts: 570
Loc: Florida
I need a couple of original restorable "road" and "runner" emblems for the doors of my 69 project. Don't want the repops. PM me please!

Also need a couple of undented door cylinders that will polish up for the same car.

Top
#2348147 - 08/03/17 08:11 PM 70 RR Drivers side Door latch assembly needed [Re: cbusters]
JMCFAN Offline
pro stock

Registered: 08/24/04
Posts: 1347
Loc: New Mexico
Need door latch assembly for 70 RR Drivers side...
_________________________
68 Charger 383/ AT Green/Green VT
70 Roadrunner 383/4sp Purple/Black VT

Top
#2348510 - 08/04/17 02:06 PM *** Wanted - 1973 "Road Runner" deck lid emblem *** [Re: JMCFAN]
MadMopars Online   content
super stock

Registered: 01/20/03
Posts: 1040
Loc: Tucson AZ,
I am looking for an original "Road Runner" emblem that goes on the deck lid of a 73 Roadrunner. PM me here or call/text Trent @ 520-904-4086. Thanks! up
_________________________




73 GTX *440*727*8 3/4*
69 DART GT *440*4 SPEED*DANA*
73 ROAD RUNNER *451*4 SPEED*DANA*
75 DODGE D300 *440*4 SPEED*DANA*
99 DODGE RAM 3500 4X4 DUALLY... ON 38"s

Top
#2348806 - 08/05/17 01:44 AM Re: B Body - Parts Wanted - 69 GTX/SAT/RR Rear Bumper Guards [Re: moparts]
Birdturd Offline
super stock

Registered: 05/16/09
Posts: 805
Loc: Iowa - a member of the rustbel...
Looking for a decent driver quality rear bumper for a 68 Plymouth RR. Some chrome issues ok just not bent. Near Iowa preferred, looking for OEM thanks

Also after passenger side qtr glass clear non-tint for the same car. Good condition no chips or scratches preferred.


Edited by Birdturd (08/11/17 07:48 PM)

Top
#2349626 - 08/06/17 04:56 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
B5 Charger Offline


Registered: 04/26/14
Posts: 2
Loc: Missouri
Looking for a correct master cylinder cover hold down bolt for 1969 power drum brake car. 1/4-20 x 1" - H head stamping

Top
#2349646 - 08/06/17 05:21 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Transman Offline
mopar

Registered: 03/27/11
Posts: 410
Loc: Michigan
Need the wide or thin front fender and door chrome for 62 Plymouth Fury. - with the "spear" that has the black "arrows" on the leading piece and the portion on the door without the raised piece. Look at "images" on google for 1962 Plymouth and you will know what I am talking about. PM me please if you have some to sell or trade - I have the wide moldings for the Belvedere in excellent shape that do not have the "arrows".


Edited by Transman (08/07/17 09:43 AM)

Top
#2349732 - 08/06/17 07:46 PM Wanted: Spicer/Raybestos Tie Rod End [Re: moparts]
Meangreen68 Offline
enthusiast

Registered: 04/14/04
Posts: 321
Loc: Raleigh, NC
I'm looking for a new in the box tie rod end for a '68 B-body.

Raybestos part number 401-1029, with "2119" stamped on the back of the part.

Thank you!

John

Top
#2350080 - 08/07/17 12:37 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
74charger07ram Online   content


Registered: 04/20/14
Posts: 6
Loc: Texas
Looking for a lower speedometer cable that goes from the cruise control servo motor to the transmission for a 74 Charger, Part # 2889785, about 54" long. Emaik me @ mesaridgeranch@aol.com

Top
#2350168 - 08/07/17 02:45 PM 1969 Plymouth Road Runner bench seat medallions [Re: 74charger07ram]
6PakBee Offline
master

Registered: 01/20/03
Posts: 5470
Loc: North Dakota
Looking for a set of 1969 Plymouth Road Runner bench seat medallions for both front and rear seats. Driver quality is fine.

Edit: Thanks to another forum member, found that my car has base interior and does not need the medallions.


Edited by 6PakBee (09/03/17 09:42 AM)
_________________________
Wife says too many cars, liquidation coming soon......

Top
#2350318 - 08/07/17 07:57 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
CompSyn Offline
super stock

Registered: 04/24/08
Posts: 1078
Loc: Pacific NW USA
Wanted: 68-69 B-Body - Buddy Seat Brackets. Good. Usable.

Send PM please.
_________________________
Project 1969 Plymouth Road Runner 383/727/3.23 F5

Top
#2350722 - 08/08/17 12:27 PM Max Wedge 3447 Carb [Re: CompSyn]
Billy no mates Offline
mopar

Registered: 05/31/06
Posts: 432
Loc: somewhere out there
Guys,

Due to being sold a duff carb I'm in need of a 3447 complete carb or the lower portion of the body.

Failing that I would consider a pair of carbs ideally dated the latter end of 1962.

please pm if you can help.

Thanks
_________________________
BillyNoMates

Top
#2350824 - 08/08/17 02:58 PM Re: Wanted [Re: RoadRunner73]
mtrt Offline
member

Registered: 06/24/08
Posts: 49
Loc: Montana
This is not a discussion forum! Contact the buyer via pm or e-mail!


Edited by tboomer (08/08/17 03:08 PM)
Edit Reason: not a discussion forum

Top
#2351973 - 08/10/17 03:02 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
hemi4speed Offline
pro stock

Registered: 01/21/03
Posts: 1238
Loc: Fairfield Maine
Looking for 63 Polara exterior moulding/trim. Need complete trim. Looking for very nice condition.
Thanks Rick

Top
#2352407 - 08/11/17 12:48 PM Holley R4734A [Re: moparts]
BS27ROB Offline
enthusiast

Registered: 04/14/05
Posts: 269
Loc: PA
Looking for a Holley R4734.

Top
#2352428 - 08/11/17 01:27 PM Re: Holley R4734A [Re: moparts]
gtx6970 Offline
I Live Here

Registered: 06/28/03
Posts: 16757
Loc: Land of Booze and Horses
FOUND



Edited by gtx6970 (08/12/17 06:26 AM)

Top
#2352673 - 08/11/17 10:23 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
17dodgebros Offline
member

Registered: 09/21/10
Posts: 39
Loc: pa
Wanted:68 coronet passenger side fender

Top
#2352883 - 08/12/17 02:26 PM 1968 Charger fenders [Re: 71rm23]
BigHemiVegas Offline
member

Registered: 08/11/17
Posts: 21
Loc: Where else?
I am wanting to buy a pair of 1968 Charger front fenders. Let me know if you have a good set that you want to sell.

Thanks!

Top
#2353109 - 08/13/17 07:52 AM Re: Holley R4734A [Re: moparts]
TOMRR Offline
super stock

Registered: 01/20/03
Posts: 961
Loc: LEE, MASS
Looking for a Real Nice !!! 1969 Plymouth Roadrunner Padded Steering Wheel, Color Black !!!

Tom C.
roadrunnertom69@msn.com

Top
#2353308 - 08/13/17 04:21 PM WTB 64 Dodge rear bumper [Re: TOMRR]
Billy no mates Offline
mopar

Registered: 05/31/06
Posts: 432
Loc: somewhere out there
Looking to buy a 64 Dodge rear bumper.

Must be straight with good chrome ideally 8 out of 10. Please pm if you can help.

Thanks
_________________________
BillyNoMates

Top
#2353335 - 08/13/17 06:03 PM WTB-seat hinge covers [Re: moparts]
abodybill Offline
member

Registered: 12/13/15
Posts: 17
Loc: Michigan
Looking for a pair of nice 1968/69 A/B-Body bucket seat hinge covers.

PM if you can help me out.

Thanks, Bill
_________________________
1966 Valiant V100 wagon
1969 Road Runner
1985 D250 pickup

Top
#2353606 - 08/14/17 11:38 AM Re: B Body - Parts Wanted - 69 GTX/SAT/RR Rear Bumper Guards [Re: CKessel]
H4E2M6I Offline
super stock

Registered: 03/07/04
Posts: 935
Loc: Belvidere,IL N.W. Chicago ...
contact the buyer via pm or e-mail. This is not a discussion forum!!!


Edited by tboomer (08/14/17 11:42 AM)
Edit Reason: not a discussion forum

Top
#2353988 - 08/14/17 10:21 PM 1971 Charger Ramcharger Hood Wanted [Re: moparts]
WyleECoyote Offline
pro stock

Registered: 09/08/09
Posts: 1325
Loc: Tennessee
Searching for a 1971 Charger Ramcharger hood. All conditions considered.
Thanks Moparts!
Ron
PM me, email, text me.
$100 finders fee for leads that end up in a deal.
_________________________
Wile E. Coyote
Super Genius, Lover of FCA US LLC Products
*************
68 Road Runner (440 4-spd), 71 Superbee (383 slap), 71 Charger 500 (383 4-spd wA/C 1of 182), 72 Imperial, 74 Charger SE (440 sunroof), 84 D350 Crew-cab Dually (440), 75 D300 Dually Tandem (318 4-speed)

Top
#2354257 - 08/15/17 12:53 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
farmboy70 Online   content
super stock

Registered: 01/25/04
Posts: 729
Loc: Western Pa
WANTED


1971 Satellite Sebring Plus rocker moldings.
Prefer NOS But excellent used also.
PM here or huffmanautobody at windstream.net
_________________________

Top
#2355553 - 08/17/17 03:13 PM Re: Holley R4734A [Re: moparts]
Sneke_Eyez Offline
enthusiast

Registered: 01/19/12
Posts: 321
Loc: Massachusetts
Wanted - 68-70 B-Body Console Shift Power Steering Column

Looking for something in decent shape but happy to paint it.

Doing a console shift conversion in my 69 Satellite wagon.

PM me or email me - sneke eyez @ gmail . com - without the spaces.

Thanks Moparts!
_________________________
1969 Satellite Wagon - G3 Hemi Swap Incoming. | 1969 Coronet Post Coupe.
2002 Intrepid ES | 2009 Ram SLT | 2004 300M Special | 2002 300M Pro Am - Hers

Are you a New England Mopar Enthusiast?
Come check out the revived NorthEast Mighty Mopar at www.northeastmightymopar.com
!

Top
#2356061 - 08/18/17 12:29 PM Re:wanted radiator 2898 048 [Re: moparts]
RAH Offline
master

Registered: 08/18/03
Posts: 4939
Loc: sw chicago
wanted 1968 radiator 2898 048 bob h 708 687 1187


Edited by RAH (08/18/17 12:30 PM)
Edit Reason: heading
_________________________
RAH@wowway.com

Top
#2356430 - 08/19/17 06:36 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
71rm23 Offline
top fuel

Registered: 01/04/08
Posts: 2261
Loc: None
WANTED- Plastic covers(?) for factory cassette floor mounted player on a '71

Top
#2356537 - 08/19/17 11:11 AM DRIVERS SIDE QUARTER GLASS NEEDED $500.00 OFFERED [Re: moparts]
Trailers4Sale Offline
member

Registered: 11/26/12
Posts: 114
Loc: usa
I need a clear drivers side quarter glass for a B Body hardtop. The date code has to be late 68 to early 69. I will pay TOP DOLLAR for a piece that has no chips or scratches through the date code. Some minor scratches are OK if they are not near the date code. Will pay $500.00.....Tony......Amalcein@aol.com.....715-579-7352

Top
#2356975 - 08/20/17 04:06 AM '70 Passenger Side Door Glide Rail [Re: moparts]
Big Bad Bee Offline


Registered: 12/22/03
Posts: 10742
Loc: Spokane, WA
I need the rearward U shaped door glass glide rail for the passenger side door on my 1970 Coronet. Need all attaching hardware.

The photo is for the LEFT side. I need the right.

Thanks.


Attachments
IMG_2371.PNG




Edited by Big Bad Bee (08/20/17 12:52 PM)
_________________________
It's not a hobby. It's therapy.

Top
#2357273 - 08/20/17 06:54 PM 1968 Charger parts needed [Re: Big Bad Bee]
blewbyu Online   content
master

Registered: 01/22/03
Posts: 3206
Loc: Florida
1) Inside roof trim above doors and 1/4 windows interior color.

2) Headliner 2 short bows for sail panel.

3) Floor shifter brackets for console.

blewbyu2bad@aol.com

Top
#2357314 - 08/20/17 09:03 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
RV2 Offline


Registered: 01/20/03
Posts: 2882
Loc: Covington Georgia
Wanted: B body Dana 60 23 spline axles, 1966-67 or 1968-70
Pm with what you have.
Thanks

Top
#2358300 - 08/22/17 07:04 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
hemi70se Offline
top fuel

Registered: 05/10/03
Posts: 2191
Loc: Minneapolis, MN
Wanted: 1970 GTX or Road Runner front side marker assemblies, must be nice and prefer ones off a southern or SW car, socket and wiring must not be corroded, don't care about lenses as I have NOS ones already

rtsehemi@aol.com

Top
#2358467 - 08/23/17 08:11 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
68RRFlyer Offline
mopar

Registered: 11/01/07
Posts: 435
Loc: IAH
Looking for a lower center dash pad for a non-A/C car, black, for my 69 Bee. I'd like it to be as nice as possible with no scratches, marks, or gummy vinyl. The pad is going into a freshly restored car and needs to be in excellent shape. Let me know what you have, send pics, and thanks!

Moparmolnar@gmail.com

Dave

Top
#2358507 - 08/23/17 09:50 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
72ls5fla Offline
member

Registered: 11/28/11
Posts: 188
Loc: Florida, US
Need a front grill assembly for a 1973 - 1974 Roadrunner

Grill needs to be in really nice shape.
No major cracks or missing pieces.

Thanks in advance.

Bill

850-567-2994
bill.chamberlain@onetechplace.com
_________________________
1970 440 Sixpack Challenger
B5 Blue, black interior, real shaker car.


https://flic.kr/s/aHskK4M5j5


Top
#2358549 - 08/23/17 11:00 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Magnumguy Offline
master

Registered: 01/19/03
Posts: 9758
Loc: S.E.Ohio
WANTED:

MoPar factory AM/FM/CB radio. Must be NOS or nearly so. MUST WORK! Also include the mic if you could.

PM or email me magnumguy78@gmail.com

Thanks


Attachments
Virginia Magnum 002.JPG




Edited by Magnumguy (08/23/17 11:03 AM)
_________________________
"Multiple Magnum owner since 1978!!"


Top
#2358681 - 08/23/17 03:59 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
MONC Offline
master

Registered: 04/08/04
Posts: 2829
Loc: The Historic Hudson Valley
WANTED :
CONSOLE MOUNTED CASSETTE PLAYER WITH PEDESTAL , HOUSING and MOUNTING BRACKET

THanks for the ad Tom.
_________________________
Mopar
Or
No
Car

Top
#2359943 - 08/25/17 09:04 PM Daytona Original Front Spoiler [Re: moparts]
Trailers4Sale Offline
member

Registered: 11/26/12
Posts: 114
Loc: usa
I need an original Daytona front spoiler that goes under the nose cone. amalcein@aol.com 715-579-7352

Top
#2359992 - 08/25/17 11:06 PM 1971 Super Bee Original Paint Bulge Hood Wanted [Re: moparts]
WyleECoyote Offline
pro stock

Registered: 09/08/09
Posts: 1325
Loc: Tennessee
Searching for a 1971 Charger Super Bee original paint bulge hood in good condition. No rust to surface rust okay - just want the hood to look good and be presentable on the surface.
PM me, email me, text me.
Thanks!!!
_________________________
Wile E. Coyote
Super Genius, Lover of FCA US LLC Products
*************
68 Road Runner (440 4-spd), 71 Superbee (383 slap), 71 Charger 500 (383 4-spd wA/C 1of 182), 72 Imperial, 74 Charger SE (440 sunroof), 84 D350 Crew-cab Dually (440), 75 D300 Dually Tandem (318 4-speed)

Top
#2361075 - 08/28/17 09:47 AM Re: B Body - Parts Wanted - 3rd Quarter - Wiring Harness [Re: moparts]
bsb757 Offline
member

Registered: 04/17/17
Posts: 3
Loc: Virginia
Looking for a Rallye Dash wiring harness (not partial on tach or clock, either works) for a 1969 Dodge Super Bee. Curious if anyone has one in good working condition or if they have any leads on where to purchase one. Classic industries is back ordered.

Thanks,
Ben

Top
#2361161 - 08/28/17 12:29 PM Re: B Body - Parts Wanted - 3rd Quarter - Wiring Harness [Re: moparts]
crowbait Offline
super stock

Registered: 09/02/03
Posts: 880
Loc: Brookville Pa
looking for the tail panel "R/T" emblem for a 69 charger. Prefer used original with pins intact to install on my ratty charger.

Top
#2361342 - 08/28/17 06:44 PM Re: B Body - Parts Wanted - 3rd Quarter - Wiring Harness [Re: moparts]
ryannewmanfan Offline
member

Registered: 06/16/10
Posts: 24
Loc: Indiana
Looking for a blue steering wheel for my 69 Super Bee. No cracks please.

Top
#2361446 - 08/28/17 09:22 PM Re: B Body - Parts Wanted - 3rd Quarter - Wiring Harness [Re: moparts]
1hot68 Offline
member

Registered: 11/14/05
Posts: 125
Loc: waukon iowa
Looking for a pair of park lights for a 68-69 plymouth b body ? Thanks, Brian

Top
#2361679 - 08/29/17 11:16 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
jld440 Offline
enthusiast

Registered: 08/03/07
Posts: 217
Loc: texas,usa
Hi I'm looking for a console for a 1963 Plymouth
Sports fury.
Thanks
Jld440

Top
#2361697 - 08/29/17 11:46 AM 67 Belvedere GTX grill to bumper filler-header/valence [Re: jld440]
IROC78 Offline
member

Registered: 02/21/06
Posts: 63
Loc: MI
I have a 67 Belvedere and need the filler panel that goes in between the front bumper and grill. May also be referred to as a header panel or front valence, I'm not sure. From what I can tell it is specific to the 67's. Please email me at bbisek@aol.com if you have a nice one. Price shipped to 49064 and pictures would be great if possible. My apologies, I marked this post as having found one but the guy ended up flaking out on me so I'm still looking. Thank you,


Edited by IROC78 (09/09/17 12:08 AM)

Top
#2362280 - 08/30/17 10:43 AM Re: 67 Belvedere GTX grill to bumper filler-header/valence [Re: moparts]
Tommy D Offline
enthusiast

Registered: 10/02/08
Posts: 333
Loc: Harleysville, PA USA
Hi. Looking for cable-shift transmission park cable. Don't need the housing, but may take it as well if price is right. No kinks please. Tom

Top
#2362461 - 08/30/17 04:34 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
1964hemi Offline
enthusiast

Registered: 09/18/03
Posts: 392
Looking for a 6 pack K frame for an 69 A12 car in nice shape.Also found in 69 early b body cars.


Thanks

Top
#2363593 - 09/01/17 02:50 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: 1964hemi]
70HemiShaker Offline
super stock

Registered: 09/26/06
Posts: 783
Loc: Home of the Bluegrass
WTB: 69 Superbee Ramcharger hood. Must be in good shape! I can mud my AMD hood....
_________________________
"It takes a Mopar to catch a Mopar"
70 Challenger: 472 Hemi, A-855,
& a 3.54 DANA 60
69 Bee..... we will see!


Top
#2364203 - 09/02/17 05:24 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: 70HemiShaker]
sixpacchallenger Offline
member

Registered: 11/30/13
Posts: 37
Loc: Upper Michigan
Wanted a rear bumper for a 69 road runner. Nice original or nos . thanks John call 9063371025 cell 9063373928 shop lt5zr1@ymail.com email or pm

Top
#2364528 - 09/03/17 11:09 AM Splash Shield Wanted for Automatic 68-70 B-Body [Re: moparts]
vinnyd76 Offline
super stock

Registered: 04/25/12
Posts: 757
Loc: Macomb, MI
Hi,

I'm looking for a splash shield for a 68-70 B-Body that attaches to the body rail on the LHS. Please PM me if you have one for sale.


Attachments
Splash Shield.jpg



Top
#2364597 - 09/03/17 12:32 PM WANTED 1968 GTX Door PANEL TIM [Re: vinnyd76]
1969gtx Offline
mopar

Registered: 02/05/06
Posts: 498
Loc: southern conn
Looking for stainless trim on interior door and quarter that goes on the panel it trims out the wood grain fit 1968 gtx and sport satellite I think Contact William.atwood@snet.nett


Edited by 1969gtx (09/06/17 11:29 AM)
_________________________
1965 A/FX Plymouth 9.50 et @139 mph
1965 A/FX awb plymouth flashback [email]10.26@129mph[/email] mph on pump gas 426 hemi
1969 GTX Hemi 4 speed 12.50 et @ 112mph in Supercar trim 12.32 113 on slicks
1970 GTX 4406pac 4 speed 11.21 @126.9 mph in supercar trim

http://www.AFXER.com

Top
#2366418 - 09/06/17 12:33 PM 1962 Lock Set [Re: moparts]
TooMany62s Offline
pro stock

Registered: 01/24/03
Posts: 1547
Loc: Greer, SC
I need ignition and door lock set for my 1962 Fury. Not sure what years will fit. possibly '62-'65. Thanks!!

Top
#2366620 - 09/06/17 06:55 PM 65 Coronet door interior door panel [Re: moparts]
moparlouie Offline
master

Registered: 01/18/06
Posts: 3766
Loc: ct.
Looking for a 65 coronet passenger side 4 door/wagon door panel in these colors. Need not be mint, but nice is good, may take other pieces if you have a set?


Attachments
102_5322.JPG


_________________________
Have been a member for years!

Top
#2367671 - 09/08/17 09:26 PM A12 Roadrunner hood [Re: moparts]
Mopucky Offline
enthusiast

Registered: 03/18/13
Posts: 281
Loc: New York
I know this is a stretch but I'm looking for an original paint/original 6 barrel sticker hood for a car. Has to be damage free as close to mint as possible. PM me if you have one or know someone with one that meets the criteria. I have an original to trade with cash if needed for a resto. Thanks!

Top
#2367942 - 09/09/17 02:02 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
raybee Offline
member

Registered: 08/18/15
Posts: 27
Loc: mass
HI, I AM LOOKING FOR A TURN SIGNAL SWITCH FOR MY 70 ROADRUNNER PART NUMBER 2947509 5XA
ANYONE HAVE ONE FOR SALE?

Top
#2367983 - 09/09/17 04:59 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: raybee]
MI Mopar Works Offline
mopar

Registered: 12/24/15
Posts: 415
Loc: MI
Looking for radio and heater delete parts for 69 GTX/ Sport Satellite/ Coronet 500 or Coronet R/T sweep gauge dash. I need:

Woodgrain radio delete bezel !FOUND!
Antenna delete fender chrome plug
Heater delete righthand vent box and cable
Defroster vent blockoffs

Any help is appreciated.

Dave (734)624-2212
dave426hemirt@yahoo.com

PIC for attention...


Attachments
516garage.jpg




Edited by MI Mopar Works (09/18/17 10:14 PM)
_________________________
MI Mopar Works
Parts Sales
Restoration and detailing of all kinds of mopar hardware
https://www.facebook.com/MIMoparWorks/


Top
#2368157 - 09/10/17 01:56 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
kdsmith07 Online   content
pro stock

Registered: 04/15/07
Posts: 1204
Loc: Loganville GA.
anyone have a few p/s couplers to sell?i need the 3" ones,not the 3.5 ones.pm me here if you do.thanks,kent

Top
#2368456 - 09/10/17 06:35 PM "road" & "runner" emblems [Re: moparts]
cbusters Offline
mopar

Registered: 05/08/05
Posts: 570
Loc: Florida
I am looking for a set of the "road runner" emblems that mount on the trunk or the doors of a 69 Road Runner. Not interested in repops. Wanting a set of originals. No pits, no missing posts, no peeling chrome. Send me an PM if you just have a nice restorable set.

Top
#2370278 - 09/13/17 05:13 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
Magnumguy Offline
master

Registered: 01/19/03
Posts: 9758
Loc: S.E.Ohio
Dodge Magnum NOS wanted:

4016 142 and 143. Headlight covers. Would consider beautiful used ones. smile

PM or email me ~ magnumguy78@gmail.com
_________________________
"Multiple Magnum owner since 1978!!"


Top
#2370654 - 09/14/17 10:39 AM 66-67 Belvedere/Satellite/GTX radio support bracket [Re: moparts]
stat5 Offline
enthusiast

Registered: 12/24/03
Posts: 309
Loc: St. Paul, MN
Looking for a radio support bracket from a 66 or 67 Belvedere/Satellie or GTX.

Thanks

Top
#2371069 - 09/14/17 11:28 PM 66-70 B-body convertible drivers side 1/4 glass.factory tint [Re: stat5]
mccannix Offline
master

Registered: 01/20/03
Posts: 3950
Loc: Ontario, Canada
Factory tinted 1/4 glass wanted for drivers side 66-70 convertible in nice condition.
Just the piece of glass alone is all that is needed, have all else.
pm or email
mccannix@cogeco.ca

Thanks

Top
#2372455 - 09/17/17 10:04 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
basketcase Offline
master

Registered: 09/03/03
Posts: 6739
Loc: east side of Ohio
1969 Coronet tail light panel brackets

got a buddy needing three of these. they go from the tail light panel to the cross member the rear bumper bolts to.
PM here


Attachments
Img01_09-16-2017.JPG


_________________________
Dave


1969 plymouth road runner post 383 4 speed waiting for F8

1991.5 W250 Cummins auto

Top
#2372467 - 09/17/17 10:24 PM WANTED 69 B-BODY REAR PASSENGER WINDOW REGULATOR [Re: moparts]
69Stinger Offline
member

Registered: 04/22/05
Posts: 178
Loc: New England
Wanted, 69 B-Body rear manual passenger side window regulator. Please email me directly as I do not check my messages on Moparts often.

Thanks
superbee@optonline.net


Edited by 69Stinger (09/17/17 10:27 PM)

Top
#2373371 - 09/19/17 01:57 PM Re: WANTED 69 B-BODY REAR PASSENGER WINDOW REGULATOR [Re: moparts]
GLR Offline
top fuel

Registered: 08/20/03
Posts: 2457
Loc: Northern Pa
WANTED; My brother has a 1965 Dodge Coronet 440 and is looking for the following parts;

Nice Grill assembly with headlight bezels if you have them.

Trunk lid finish panel either coronet 440 or 500 he doesn't care as long as it's in good condition and fits.

Emblems; For the front fenders "Coronet" "440" and also the dodge emblem for the top front part of the fenders.

Send me a PM or e-mail
PA

Top
#2373516 - 09/19/17 06:03 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
weaz4200 Offline
member

Registered: 06/25/17
Posts: 10
Loc: illinois
Looking for 4 14x6 steel wheels. Non rallye. I believe they were 72-74 bbodies... stamped 3580060 near valve stem. Thanks.

Top
#2373695 - 09/19/17 10:46 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
1badmopar Offline
enthusiast

Registered: 02/06/03
Posts: 256
Loc: Garland, Texas
Looking for Emergency Brake Pedal Assymbly for 1966 Belvedere.

Thanks!
_________________________
1966 Plymouth Belvedere with 520" RB, 440-1 heads, 10.3:1 cr, hydraulic roller, TKO 600. (669hp @ 5400, 704tq @ 4500)

Top
#2374084 - 09/20/17 06:15 PM Airgarbber / Ramcharger hood studs [Re: moparts]
70gtx440dana Offline
master

Registered: 12/27/03
Posts: 2657
Loc: Lansing, MI
Looking for 2-4 of these air grabber hood studs. Joe 517-243-7115 or jsawyer@wowway.com


Attachments
pic 1.jpg


_________________________
70 Road Runner 383-4 4 speed FJ5 & black guts 70 Charger R/T 440-4 4 speed FJ5 & white guts

Top
#2374785 - 09/21/17 09:16 PM 1968 road runner 8 track bezel [Re: 70gtx440dana]
blewbyu Online   content
master

Registered: 01/22/03
Posts: 3206
Loc: Florida
I need the plastic dash bezel for a 1968 Plymouth road runner 8 track that has the little hole for the button and large slot for tape to fit through. Any color excepted.

blewbyu2bad@aol.com

Top
#2374975 - 09/22/17 10:31 AM Carter AVS 4617S [Re: moparts]
moparnation74 Offline
member

Registered: 02/03/17
Posts: 14
Loc: Texas
In search for a Carter AVS 4617S 440 4spd carb

Must be dated for one of the three options

1. I8

2. J8

3. K8

Will pay top dollar for the right rebuild-able carb or NOS

Pm me please

Top
#2374999 - 09/22/17 11:02 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5003
Loc: NJ
Looking for an original 1970 440 HP carb, part number 4737 in excellent original condition including the idle solenoid and the carb ID tag. Thanks

Email Kenei@comcast.net

Top
#2375001 - 09/22/17 11:04 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
moparply Offline
master

Registered: 08/27/03
Posts: 5003
Loc: NJ
Looking for a NOS 1970 Roadrunner GTX tail light harness. I have parts for trade if your looking for something.

Email Kenei@comcast.net

Top
#2375544 - 09/23/17 02:33 PM Air grabber part needed [Re: moparts]
BLACKHEMIRR Offline
enthusiast

Registered: 09/16/04
Posts: 346
I'm looking for one of the long pieces of angle steel that hold up the screens in the 69 Road Runner/GTX air grabber hood inserts, the piece that the clips contact. Please PM me here if you can help. Thanks Moparts

Top
#2375652 - 09/23/17 06:22 PM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
mike337 Offline
super stock

Registered: 04/17/03
Posts: 1191
Loc: Hurricane, WV
Need the driver's side duct for a 69 B-body with A/C.

Mike


Attachments
Duct Z.png




Edited by mike337 (09/23/17 06:27 PM)

Top
#2375985 - 09/24/17 03:05 PM need a couple 71 up tuffwheels or centercaps [Re: RJS]
ogopogo Offline
pro stock

Registered: 10/14/03
Posts: 1566
Loc: BC Canada
need 71 style tuff wheel complete or will buy center caps only,need several!

ogopogo69 "at" shaw.ca


Attachments
image4.JPG



Top
#2376441 - 09/25/17 11:44 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: moparts]
70RRINVIOLET6PAK Offline
member

Registered: 12/03/10
Posts: 18
Loc: ONTARIO,CANADA
Looking for a Nos or an extremely nice idle stop solenoid DR111429 for a 1970 440+6 .Thanks Bob

Top
#2377582 - 09/27/17 08:00 AM Re: B Body - Parts Wanted - 3rd Quarter [Re: 70RRINVIOLET6PAK]
moparmike1 Offline
pro stock

Registered: 02/01/04
Posts: 1296
Loc: Sault Ste. Marie, Ontario, Can...
Hi,

I'm looking for part number 3500986, preferably NOS. This is the lengthwise weatherstrip at the base of the quarter window for a 1971-1976 Plymouth/Dodge Satellite, Coronet or Fury station wagon. I've shown the location of this weatherstrip in the picture below, see red rectangle.

Please contact me at moparmike1@shaw.ca

Thank you,

Mike.


Attachments
72_Wagon_3500986.jpg



Top
#2377965 - 09/27/17 07:43 PM Re: B Body - Parts Wanted - 3rd Quarter 62 Belvedere [Re: moparmike1]
peabodyracing Offline
top fuel

Registered: 01/01/07
Posts: 1742
Loc: Minnesota
Need front fender trim for 62 Belvedere.

Thanks in advance. loopper@aol.com or PM here if you prefer.
_________________________
Lead, follow or get the hell out of the way

Top
#2378372 - 09/28/17 02:42 PM Re: WANTED: 1971 brown seat belt buckles [Re: moparts]
Silverbullet2 Offline
mopar

Registered: 09/28/05
Posts: 546
Loc: North Carolina, USA
Maroon or burgundy interior pieces for a 68 Road Runner. Lower steering column cover, A pillar moldings, kick panels, front and rear armrests, door windlaces, door plugs, lock knobs, side pieces for post coupe, bucket seat hinge covers, rear window inside trim??? Give me a holler!

John 704-361-1856

Top
#2379330 - 09/30/17 12:18 PM 1970 Road Runner / GTX Glove box door [Re: moparts]
AzMoparMike Offline
member

Registered: 02/03/16
Posts: 33
Loc: Arizona
I am looking for a 70 road runner glove box door with the latch. Please let me know if you have one for sale,

Top
#2379460 - 09/30/17 04:52 PM 1967 gtx power steering hose [Re: moparts]
marcjames Offline
member

Registered: 08/11/15
Posts: 79
Loc: ny
looking for a 1967 gtx power steering pressure hose thanks mark

Top
Page 1 of 8 1 2 3 4 5 6 7 8 >

Advertisement
Sponsored Link
Forum Stats
24,899 Registered Members
32 Forums
184,275 Topics
2,134,947 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Carburetor spacers for heat
by RAY1969CARS
10/20/17 10:35 PM
Question about SVO rear brakes, Dana S60, Dr. Diff/Strange
by TomsCharger70
10/20/17 10:27 PM
Stamped number on car
by toplescuda
10/20/17 10:12 PM
how to remove accelerator cable from the floor
by moparpro
10/20/17 08:04 PM