jeep cherokee 4.0 - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop jeep cherokee 4.0

Print Thread

jeep cherokee 4.0 #2305829 05/17/17 01:07 AM 05/17/17 01:07 AM
Joined: Sep 2003 Posts: 998 South-east Mn B blaze OP super stock
blaze OP super stock B Joined: Sep 2003 Posts: 998 South-east Mn	I found a 2001 Jeep Grand Cherokee with a bad engine. I have a '99 Jeep Cherokee Classic with a good engine. Are the 4.0 engines (electronics) computer connections going to be the same between '99 and '01? I need this to be plug-n-play. I don't want to spend a lot of time on it....it's work beater, Thank-you

Re: jeep cherokee 4.0 [Re: blaze] #2306418 05/18/17 12:27 AM 05/18/17 12:27 AM
Joined: Jan 2003 Posts: 8,017 Tulsa OK Bad340fish master
Bad340fish master Joined: Jan 2003 Posts: 8,017 Tulsa OK	I think you are good to go, if not I believe everything will swap over from one to the other. 68 Barracuda Formula S 340

Re: jeep cherokee 4.0 [Re: Bad340fish] #2307023 05/18/17 09:55 PM 05/18/17 09:55 PM
Joined: Sep 2003 Posts: 998 South-east Mn B blaze OP super stock
blaze OP super stock B Joined: Sep 2003 Posts: 998 South-east Mn	Thank you

Re: jeep cherokee 4.0 [Re: blaze] #2307181 05/19/17 02:26 AM 05/19/17 02:26 AM
Joined: Jan 2003 Posts: 1,261 Phoenix, AZ B Belvedere1 pro stock
Belvedere1 pro stock B Joined: Jan 2003 Posts: 1,261 Phoenix, AZ	My guess is no. I think 2000 was the first year for distributor-less ignition, so the 99 would have a different PCM. I could be wrong but worth researching.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1