Previous Thread
Next Thread
Print Thread
Which wiper linkage bushing? #2256942
02/21/17 01:03 AM
02/21/17 01:03 AM
Joined: Jul 2016
Posts: 141
KY
D
DougR Offline OP
member
DougR  Offline OP
member
D

Joined: Jul 2016
Posts: 141
KY
The car is a 1969 Barracuda. I am missing the plastic bushing/cam that goes between the wiper motor crank arm pin and the long link to the drivers side wiper shaft. Y1 shows one that is good for all A bodies but Classic Industries shows two models: one for two speed wipers and a different one for variable speed motors. Both of the CI models are very pricy. Are there really two different types? Anybody know where I can get one for less than $10?

Re: Which wiper linkage bushing? [Re: DougR] #2256957
02/21/17 01:30 AM
02/21/17 01:30 AM
Joined: Oct 2005
Posts: 8,828
Ontario, Canada
S
Stanton Offline
Don't question me!
Stanton  Offline
Don't question me!
S

Joined: Oct 2005
Posts: 8,828
Ontario, Canada
Two types for sure.

What do you call "pricy".

Re: Which wiper linkage bushing? [Re: Stanton] #2256987
02/21/17 02:26 AM
02/21/17 02:26 AM
Joined: Jan 2003
Posts: 20,356
Eagle, Idaho
Neil Offline
The Doctor is in.
Neil  Offline
The Doctor is in.

Joined: Jan 2003
Posts: 20,356
Eagle, Idaho
My 70 Swinger with a 2 speed wiper setup uses this style of wiper arm linkage retainer. It pops into the hole in the metal arms.

http://www.mrmoparts.net/wiper-linkage-bushing-67-72-a-body-66-70-b-body-with-2-speed-motor/


The round one on the left is the other style.

http://www.mrmoparts.net/wiper-linkage-retainer/

Re: Which wiper linkage bushing? [Re: DougR] #2257044
02/21/17 09:46 AM
02/21/17 09:46 AM
Joined: Jul 2004
Posts: 317
Canada
ACR2000 Offline
enthusiast
ACR2000  Offline
enthusiast

Joined: Jul 2004
Posts: 317
Canada
I think this is what you are referring to, hole offset is different on a 2 vs 3 speed W-M . They are usually around $ 25 which I think is fair. Now maybe you can find a used one for less , good luck.

téléchargement (1).jpgtéléchargement (2).jpg
Last edited by ACR2000; 02/21/17 09:50 AM.






Powered by UBB.threads™ PHP Forum Software 7.7.1