Good first day on the dyno with the new Hemi..Updated! - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Good first day on the dyno with the new Hemi..Updated!

Print Thread

Page 1 of 4

1

2

3

4

Good first day on the dyno with the new Hemi..Updated! #219680 02/10/09 01:03 AM 02/10/09 01:03 AM
Joined: Jan 2003 Posts: 1,624 Orange County, Ca. B1CUDA OP top fuel
B1CUDA OP top fuel Joined: Jan 2003 Posts: 1,624 Orange County, Ca.	We were able to make only two pulls today, because the actual schedule isn't until tomorrow, but, the initial results are promising. The first pull was just to check and watch everything, as the motor is brand new. We took the motor to 8000 RPM, and it made 1207HP. The second, at last pull of the day, we re-torqued the heads, re-checked the lash, and did nothing else. I am not going to give the actual number, but, it was WAY over 1250HP @ 8800RPM. We are thinking this thing will make every bit of 1310-1320HP tomorrow, after we start tuning it, in detail. Thank you very much to those of you who have contacted me, to check the status of this motor. You guys kept me pumped up about doing this. Off to bed, to catch some well-deserved zzzzzz's.

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219681 02/10/09 01:04 AM 02/10/09 01:04 AM
Joined: Oct 2006 Posts: 977 Poulsbo, WA ChrisJohnston669 super stock
ChrisJohnston669 super stock Joined: Oct 2006 Posts: 977 Poulsbo, WA	WOW!!!! That's some serious power. I want to see it run in your car!

Post deleted by Defbob [Re: ChrisJohnston669] #219682 02/10/09 01:15 AM 02/10/09 01:15 AM
A Anonymous Unregistered
Anonymous Unregistered A

Re: Good first day on the dyno with the new Hemi...... #219683 02/10/09 01:18 AM 02/10/09 01:18 AM
Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY	Bet that's a Pro Stock Hemi.... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219684 02/10/09 01:19 AM 02/10/09 01:19 AM
Joined: Jul 2004 Posts: 19,317 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,317 State of confusion	That sounds very promising. Good luck to you and make us mopars proud and if it`s ready, why not meet us up at Famoso for some shake down runs. 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Re: Good first day on the dyno with the new Hemi...... #219685 02/10/09 01:19 AM 02/10/09 01:19 AM
Joined: Jan 2003 Posts: 1,624 Orange County, Ca. B1CUDA OP top fuel
B1CUDA OP top fuel Joined: Jan 2003 Posts: 1,624 Orange County, Ca.	Quote: what's the combo? 2007 Alan/Roy Johnson PS Hemi, with a little lower compression, and nowhere near the cam that the actual PS guys are running. O.K., now I am really off to bed.

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219686 02/10/09 02:13 AM 02/10/09 02:13 AM
Joined: Jan 2003 Posts: 19,355 Las Vegas Al_Alguire I Live Here
Al_Alguire I Live Here Joined: Jan 2003 Posts: 19,355 Las Vegas	WooHooo....Make sure you take good care of my new baby..Sounds great cant wait to hear it in person "I am not ashamed to confess I am ignorant of what I do not know." "It's never wrong to do the right thing"

Re: Good first day on the dyno with the new Hemi...... [Re: Al_Alguire] #219687 02/10/09 02:20 AM 02/10/09 02:20 AM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Quote: WooHooo....Make sure you take good care of my new baby..Sounds great cant wait to hear it in person I guess Al is planning on adopting this motor too when your done with it lol. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: Good first day on the dyno with the new Hemi...... [Re: Al_Alguire] #219688 02/10/09 02:20 AM 02/10/09 02:20 AM
Joined: Jan 2003 Posts: 4,152 SO. CAL. 7 70blackfish master
70blackfish master 7 Joined: Jan 2003 Posts: 4,152 SO. CAL.	SWEET!!!!! that will move... any pictures?

Re: Good first day on the dyno with the new Hemi...... [Re: Triple Threat] #219689 02/10/09 02:34 AM 02/10/09 02:34 AM
Joined: Jan 2003 Posts: 19,355 Las Vegas Al_Alguire I Live Here
Al_Alguire I Live Here Joined: Jan 2003 Posts: 19,355 Las Vegas	Quote: Quote: I guess Al is planning on adopting this motor too when your done with it lol. Heck yeah I am. I love hand me downs "I am not ashamed to confess I am ignorant of what I do not know." "It's never wrong to do the right thing"

Re: Good first day on the dyno with the new Hemi...... [Re: Al_Alguire] #219690 02/10/09 03:08 AM 02/10/09 03:08 AM
Joined: Jan 2003 Posts: 4,152 SO. CAL. 7 70blackfish master
70blackfish master 7 Joined: Jan 2003 Posts: 4,152 SO. CAL.	and AL I will take your motor, THANKS!

Re: Good first day on the dyno with the new Hemi...... [Re: 70blackfish] #219691 02/10/09 08:55 AM 02/10/09 08:55 AM
Joined: Jul 2006 Posts: 9,366 Lehigh Acres, Florida rickstershemi master
rickstershemi master Joined: Jul 2006 Posts: 9,366 Lehigh Acres, Florida	WOW....Can't wait to see the time slips....Congrats and best of luck with the new bullet... Rickster

Re: Good first day on the dyno with the new Hemi...... [Re: rickstershemi] #219692 02/10/09 09:05 AM 02/10/09 09:05 AM
Joined: Mar 2006 Posts: 5,067 Orlando Florida blown572dart master
blown572dart master Joined: Mar 2006 Posts: 5,067 Orlando Florida	WOW!!!! Very Nice

Re: Good first day on the dyno with the new Hemi...... [Re: blown572dart] #219693 02/10/09 09:57 AM 02/10/09 09:57 AM
Joined: Nov 2003 Posts: 10,384 Upstate NY Bigcube I Live Here
Bigcube I Live Here Joined: Nov 2003 Posts: 10,384 Upstate NY	Jim

Re: Good first day on the dyno with the new Hemi...... [Re: blown572dart] #219694 02/10/09 09:57 AM 02/10/09 09:57 AM
Joined: Jan 2003 Posts: 3,616 Riverside, Ca G G_bob master
G_bob master G Joined: Jan 2003 Posts: 3,616 Riverside, Ca	I have but one thing to say.....

Re: Good first day on the dyno with the new Hemi...... [Re: G_bob] #219695 02/10/09 10:12 AM 02/10/09 10:12 AM
Joined: Sep 2008 Posts: 2,840 Flint, Michigan B1Fish540 master
B1Fish540 master Joined: Sep 2008 Posts: 2,840 Flint, Michigan	Thats what I'm talkin about!

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219696 02/10/09 10:13 AM 02/10/09 10:13 AM
Joined: Jun 2007 Posts: 478 Stratford,Ct 7 7sec.cuda mopar
7sec.cuda mopar 7 Joined: Jun 2007 Posts: 478 Stratford,Ct	very nice good luck

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219697 02/10/09 01:24 PM 02/10/09 01:24 PM
Joined: Aug 2003 Posts: 43,097 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,097 Bend,OR USA	Chris, congratulations. Which class are you going to run with this new Bullet? Where did you dyno it and who is doing the work on it Are you willig to share any of the specs on the motor ? Just curious on what parts and size, intake, carbs and C.I. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Post deleted by Defbob [Re: Cab_Burge] #219698 02/10/09 01:42 PM 02/10/09 01:42 PM
A Anonymous Unregistered
Anonymous Unregistered A

Re: Good first day on the dyno with the new Hemi...... [Re: B1CUDA] #219699 02/10/09 03:22 PM 02/10/09 03:22 PM
Joined: Jul 2003 Posts: 2,637 Western Michigan 68Fastback master
68Fastback master Joined: Jul 2003 Posts: 2,637 Western Michigan	Man Chris your car is really gonna be fast, I think I asked this before but will you have to do anything to the car for the extra speed it will see. Congrats and must of been hard trying to sleep with those two pulls. Jesse

Page 1 of 4

1

2

3

4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1