Previous Thread
Next Thread
Print Thread
LA '340' Edelbrocks #218513
02/09/09 09:21 AM
02/09/09 09:21 AM
Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
HardcoreB Offline OP
master
HardcoreB  Offline OP
master

Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
PN 60179 Edelbrock...Website says chamber is milled .060" deep for + deck pistons. My question is has anyone milled these heads to closed chamber for quench? What was the new head cc volume? Is there enough material in the chamber to regain the lost volume? Once milled to closed chamber can I achieve 64-65cc's?

Re: LA '340' Edelbrocks [Re: HardcoreB] #218514
02/09/09 10:19 AM
02/09/09 10:19 AM
Joined: Jan 2003
Posts: 8,547
State College, PA
RyanJ Offline
moparts member
RyanJ  Offline
moparts member

Joined: Jan 2003
Posts: 8,547
State College, PA
Yes I've milled them to make them closed......

I do not remember chamber volume, has to be in the 55-57 range at least. With radical reshaping of the chamber, yes you could get back to around 63.

I just milled a set of CNC INDYBrock heads to edge of intake seats, after their big 74 CC CNC chamber & they were 62.5 CC at edge of seats.

Re: LA '340' Edelbrocks [Re: RyanJ] #218515
02/09/09 01:37 PM
02/09/09 01:37 PM
Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
HardcoreB Offline OP
master
HardcoreB  Offline OP
master

Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
That is what I wanted to know, thank you.







Powered by UBB.threads™ PHP Forum Software 7.7.1