FM Bearing defect - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech FM Bearing defect

Print Thread

FM Bearing defect #213482 02/04/09 12:15 AM 02/04/09 12:15 AM
Joined: Aug 2005 Posts: 759 Southington Ct. T turbobitt OP super stock
turbobitt OP super stock T Joined: Aug 2005 Posts: 759 Southington Ct.	Has anyone else seen this ? This is the second set that I got with this defect. If you look at the picture, you can see the lines running under the plating. Deep enough to feel this with your finger. Looks like tool chatter or something. Both sets of bearings had it on the same lower thrust shell. Last edited by turbobitt; 02/04/09 12:22 AM. 1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.

Re: FM Bearing defect [Re: turbobitt] #213483 02/04/09 12:19 AM 02/04/09 12:19 AM
Joined: Aug 2003 Posts: 43,095 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,095 Bend,OR USA	Attachment no worky Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: FM Bearing defect [Re: Cab_Burge] #213484 02/04/09 12:22 AM 02/04/09 12:22 AM
Joined: Aug 2005 Posts: 759 Southington Ct. T turbobitt OP super stock
turbobitt OP super stock T Joined: Aug 2005 Posts: 759 Southington Ct.	Sorry, Here it is.. 4999479-bearing006b.jpg (168 downloads) 1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.

Re: FM Bearing defect [Re: turbobitt] #213485 02/04/09 12:29 AM 02/04/09 12:29 AM
Joined: Aug 2003 Posts: 43,095 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,095 Bend,OR USA	Looks like a 3/4 groove bearing to me, is the other side the same way? If not something is really wrong, send them back if the other side is not identicle to that side Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: FM Bearing defect [Re: Cab_Burge] #213486 02/04/09 01:27 AM 02/04/09 01:27 AM
Joined: Aug 2005 Posts: 759 Southington Ct. T turbobitt OP super stock
turbobitt OP super stock T Joined: Aug 2005 Posts: 759 Southington Ct.	It is a 3/4 groove and the other side doesn't have the chatter defect. 1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.

Re: FM Bearing defect [Re: turbobitt] #213487 02/04/09 03:43 AM 02/04/09 03:43 AM
Joined: May 2004 Posts: 852 Brisbane Australia 5 572B1 super stock
572B1 super stock 5 Joined: May 2004 Posts: 852 Brisbane Australia	I have federal mogul 119m 3/4 groove mains. I just checked them,and mine are smooth all the way around on uppers and lowers.No chatter marks. Rob. Last edited by 572B1; 02/04/09 03:48 AM.

Re: FM Bearing defect [Re: 572B1] #213488 02/04/09 09:19 AM 02/04/09 09:19 AM
Joined: Aug 2005 Posts: 759 Southington Ct. T turbobitt OP super stock
turbobitt OP super stock T Joined: Aug 2005 Posts: 759 Southington Ct.	Quote: I have federal mogul 119m 3/4 groove mains. I just checked them,and mine are smooth all the way around on uppers and lowers.No chatter marks. Rob. That is the same P/N. This is the second set that I got like this. Both have been sitting in the box for about a year. If I got two sets, than there must be a lot of defective product out there. What are the chances of winning the Lotto twice. 1970 Challenger w/572 Hemi street car and my pride and joy. 1986 T-Type with 272 Stage 2 Buick V6 engine - True 8 second street car. Just updated the engine and put down 928 HP @ 35# boost to the ground on chasis dyno. 1976 Cee Bee Avenger Jet Boat - 460 Ford powered.

Re: FM Bearing defect [Re: turbobitt] #213489 02/04/09 09:54 AM 02/04/09 09:54 AM
Joined: May 2004 Posts: 852 Brisbane Australia 5 572B1 super stock
572B1 super stock 5 Joined: May 2004 Posts: 852 Brisbane Australia	Quote: Quote: I have federal mogul 119m 3/4 groove mains. I just checked them,and mine are smooth all the way around on uppers and lowers.No chatter marks. Rob. That is the same P/N. This is the second set that I got like this. Both have been sitting in the box for about a year. If I got two sets, than there must be a lot of defective product out there. What are the chances of winning the Lotto twice. I have a set of 119m-10s on order through dan at performance only racing.I will get him to check mine before they leave the states. rob

Re: FM Bearing defect [Re: turbobitt] #213490 02/04/09 10:15 AM 02/04/09 10:15 AM
Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio Challenger 1 Too Many Posts
Challenger 1 Too Many Posts Joined: Feb 2005 Posts: 28,312 Cincinnati, Ohio	Quote: Has anyone else seen this ? This is the second set that I got with this defect. If you look at the picture, you can see the lines running under the plating. Deep enough to feel this with your finger. Looks like tool chatter or something. Both sets of bearings had it on the same lower thrust shell. Yes I have seen that and have used them with no problems.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1