Page 1 of 3 1 2 3 >
Topic Options
#2110101 - 07/14/16 06:01 PM BPE Small Block CNC Cylinder Heads
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
I have a new cylinder head that is now available for small blocks with 2 options. Moderators, please leave this here for 24 hrs then move it to the New Products Section.

Rod


Attachments
CNC Cylinder Head Ad Sheet.jpg



Top
#2110107 - 07/14/16 06:09 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
MR_P_BODY Online   content
Master

Registered: 06/13/03
Posts: 49821
Loc: Romeo MI
Got any info.. flow at what... what rockers
and intake.. what headers
wave
_________________________

W-9 8.94 @ 151 NOW ON E-85
Mike "Raff"...(180)Watching over us
CAR IS FOR SALE

Top
#2110111 - 07/14/16 06:18 PM Re: BPE Small Block CNC Cylinder Heads [Re: MR_P_BODY]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
All test were at 28". The CNC-205 uses standard rockers, the CNC-220 uses a .350" offset rocker that is available from Hughes Engines. Standard LA intakes and standard headers.

Rod

Top
#2110136 - 07/14/16 07:22 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
DavidDean Offline
pro stock

Registered: 03/28/03
Posts: 1462
Loc: Lubbock,TX
Nice work!! Thanks, looks like you worked w/ some good people for sure !

Top
#2110167 - 07/14/16 08:34 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 22389
Loc: Oregon
Looks great. I don't plan on ever building another SB but who knows. If I do I'll certainly take a serious look at those.

Top
#2110174 - 07/14/16 08:41 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
B3422W5 Offline
master

Registered: 01/20/03
Posts: 9608
Loc: Portage,michigan
Are these another version of the Airwolf castings?
_________________________
69 Dart, 360, cloned to a GTS from its original 340 Swinger. sorting it out, first outing soon.

Top
#2110202 - 07/14/16 09:12 PM Re: BPE Small Block CNC Cylinder Heads [Re: B3422W5]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
No Sir, they are not.

Rod

Top
#2110230 - 07/14/16 09:38 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
B3422W5 Offline
master

Registered: 01/20/03
Posts: 9608
Loc: Portage,michigan
Hope you do well with them Rod. There are a lot of heads out there in that segment.
I have looked at those Hughes bigmouth eddies before. 225 intake ports and they( according to Hughes) go over 300 at 1/2 inch and are Eddie castings.
Not trying to pick on you, sure you know what is out there... Lol
_________________________
69 Dart, 360, cloned to a GTS from its original 340 Swinger. sorting it out, first outing soon.

Top
#2110338 - 07/14/16 11:42 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
Twostick Offline
master

Registered: 05/20/03
Posts: 4592
Loc: Downtown Roebuck Ont
Combustion chamber shape?

Kevin

Top
#2110356 - 07/15/16 01:07 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
72Swinger Offline
master

Registered: 02/23/11
Posts: 4260
Loc: Nebraska
These look like the best standard intake heads around to me, good job.
_________________________
Mopar to the bone!!!

Top
#2110597 - 07/15/16 02:38 PM Re: BPE Small Block CNC Cylinder Heads [Re: Twostick]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
Chamber


Attachments
Chamber 2_Small Photo.jpg



Top
#2110612 - 07/15/16 03:03 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
MR_P_BODY Online   content
Master

Registered: 06/13/03
Posts: 49821
Loc: Romeo MI
Are the rocker stands set up for a 2" installed
long valve height or the stock 1.88" installed
height spring... what length valves
wave
_________________________

W-9 8.94 @ 151 NOW ON E-85
Mike "Raff"...(180)Watching over us
CAR IS FOR SALE

Top
#2110629 - 07/15/16 03:20 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 22389
Loc: Oregon
Originally Posted By BPE
Chamber




Looks super nice to me! Any dyno numbers yet?

Top
#2110637 - 07/15/16 03:30 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
justinp61 Offline
master

Registered: 10/01/03
Posts: 8929
Loc: W. Kentucky
How thick are the decks?

Top
#2110804 - 07/15/16 07:24 PM Re: BPE Small Block CNC Cylinder Heads [Re: MR_P_BODY]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
All of my testing was done and checked with a 5.010" (+.100") valve and setup at 1.975". That's also with a .060" spring locator.

Rod

Top
#2110805 - 07/15/16 07:25 PM Re: BPE Small Block CNC Cylinder Heads [Re: justinp61]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
5/8" Thick on the deck.

Rod

Top
#2159018 - 09/21/16 08:02 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 968
Loc: Manitoba Canada
Anyone buy these yet or dyno a engine with them yet?
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2159024 - 09/21/16 08:13 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 1946
Loc: Kansas Roads Between 0 and 140...
Priced too high for the cost of import castings.

At $2200 bare if one is doing it right thats + - 1k profit per bare set sold.

As mentioned lots of options out there.

Chamber is copied off a indy head design.

Nothing new here in design or flow....I just dont see it.

Top
#2159116 - 09/21/16 09:24 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 968
Loc: Manitoba Canada
Okay I will look at some other heads, what do you recommend that flows the same for around the same price point?
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2159509 - 09/22/16 02:35 PM Re: BPE Small Block CNC Cylinder Heads [Re: EV2Bird]
clonestocker Offline
top fuel

Registered: 01/20/03
Posts: 2112
Loc: Tucson, Arizona
Originally Posted By EV2Bird
Priced too high for the cost of import castings.

At $2200 bare if one is doing it right thats + - 1k profit per bare set sold.

As mentioned lots of options out there.

Chamber is copied off a indy head design.

Nothing new here in design or flow....I just dont see it.


The Best of the Best small block guys are in on these. It's not a chicom head. realcrazy
_________________________

Top
Page 1 of 3 1 2 3 >

Advertisement
Sponsored Link
Forum Stats
24,679 Registered Members
32 Forums
182,384 Topics
2,098,515 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
1975 Plymouth Duster
by Neil
06/29/17 09:56 AM
The forgotten generation of Challengers
by Neil
06/29/17 09:53 AM
70 B-Body pittman arm
by CKessel
06/29/17 09:53 AM
Carlisle Moparts Tent
by moparts
06/29/17 09:27 AM