Page 1 of 3 1 2 3 >
Topic Options
#2110101 - 07/14/16 06:01 PM BPE Small Block CNC Cylinder Heads
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
I have a new cylinder head that is now available for small blocks with 2 options. Moderators, please leave this here for 24 hrs then move it to the New Products Section.

Rod


Attachments
CNC Cylinder Head Ad Sheet.jpg



Top
#2110107 - 07/14/16 06:09 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
MR_P_BODY Offline
Master

Registered: 06/13/03
Posts: 50346
Loc: Romeo MI
Got any info.. flow at what... what rockers
and intake.. what headers
wave
_________________________

W-9 8.94 @ 151 NOW ON E-85
Mike "Raff"...(180)Watching over us
CAR IS FOR SALE

Top
#2110111 - 07/14/16 06:18 PM Re: BPE Small Block CNC Cylinder Heads [Re: MR_P_BODY]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
All test were at 28". The CNC-205 uses standard rockers, the CNC-220 uses a .350" offset rocker that is available from Hughes Engines. Standard LA intakes and standard headers.

Rod

Top
#2110136 - 07/14/16 07:22 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
DavidDean Offline
pro stock

Registered: 03/28/03
Posts: 1477
Loc: Lubbock,TX
Nice work!! Thanks, looks like you worked w/ some good people for sure !

Top
#2110167 - 07/14/16 08:34 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23338
Loc: Oregon
Looks great. I don't plan on ever building another SB but who knows. If I do I'll certainly take a serious look at those.

Top
#2110174 - 07/14/16 08:41 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
B3422W5 Offline
master

Registered: 01/20/03
Posts: 9928
Loc: Portage,michigan
Are these another version of the Airwolf castings?
_________________________
69 Dart GTS, performance upgrades in progress
11.26@ 118.40 best so far. Stock 360 shortblock with eddie heads.

Top
#2110202 - 07/14/16 09:12 PM Re: BPE Small Block CNC Cylinder Heads [Re: B3422W5]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
No Sir, they are not.

Rod

Top
#2110230 - 07/14/16 09:38 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
B3422W5 Offline
master

Registered: 01/20/03
Posts: 9928
Loc: Portage,michigan
Hope you do well with them Rod. There are a lot of heads out there in that segment.
I have looked at those Hughes bigmouth eddies before. 225 intake ports and they( according to Hughes) go over 300 at 1/2 inch and are Eddie castings.
Not trying to pick on you, sure you know what is out there... Lol
_________________________
69 Dart GTS, performance upgrades in progress
11.26@ 118.40 best so far. Stock 360 shortblock with eddie heads.

Top
#2110338 - 07/14/16 11:42 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
Twostick Offline
master

Registered: 05/20/03
Posts: 4742
Loc: Downtown Roebuck Ont
Combustion chamber shape?

Kevin

Top
#2110356 - 07/15/16 01:07 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
72Swinger Offline
master

Registered: 02/23/11
Posts: 4288
Loc: Nebraska
These look like the best standard intake heads around to me, good job.
_________________________
Mopar to the bone!!!

Top
#2110597 - 07/15/16 02:38 PM Re: BPE Small Block CNC Cylinder Heads [Re: Twostick]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
Chamber


Attachments
Chamber 2_Small Photo.jpg



Top
#2110612 - 07/15/16 03:03 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
MR_P_BODY Offline
Master

Registered: 06/13/03
Posts: 50346
Loc: Romeo MI
Are the rocker stands set up for a 2" installed
long valve height or the stock 1.88" installed
height spring... what length valves
wave
_________________________

W-9 8.94 @ 151 NOW ON E-85
Mike "Raff"...(180)Watching over us
CAR IS FOR SALE

Top
#2110629 - 07/15/16 03:20 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 23338
Loc: Oregon
Originally Posted By BPE
Chamber




Looks super nice to me! Any dyno numbers yet?

Top
#2110637 - 07/15/16 03:30 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
justinp61 Offline
master

Registered: 10/01/03
Posts: 9168
Loc: W. Kentucky
How thick are the decks?

Top
#2110804 - 07/15/16 07:24 PM Re: BPE Small Block CNC Cylinder Heads [Re: MR_P_BODY]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
All of my testing was done and checked with a 5.010" (+.100") valve and setup at 1.975". That's also with a .060" spring locator.

Rod

Top
#2110805 - 07/15/16 07:25 PM Re: BPE Small Block CNC Cylinder Heads [Re: justinp61]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
5/8" Thick on the deck.

Rod

Top
#2159018 - 09/21/16 08:02 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
Anyone buy these yet or dyno a engine with them yet?
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2159024 - 09/21/16 08:13 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
Priced too high for the cost of import castings.

At $2200 bare if one is doing it right thats + - 1k profit per bare set sold.

As mentioned lots of options out there.

Chamber is copied off a indy head design.

Nothing new here in design or flow....I just dont see it.

Top
#2159116 - 09/21/16 09:24 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
Okay I will look at some other heads, what do you recommend that flows the same for around the same price point?
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2159509 - 09/22/16 02:35 PM Re: BPE Small Block CNC Cylinder Heads [Re: EV2Bird]
clonestocker Offline
top fuel

Registered: 01/20/03
Posts: 2129
Loc: Tucson, Arizona
Originally Posted By EV2Bird
Priced too high for the cost of import castings.

At $2200 bare if one is doing it right thats + - 1k profit per bare set sold.

As mentioned lots of options out there.

Chamber is copied off a indy head design.

Nothing new here in design or flow....I just dont see it.


The Best of the Best small block guys are in on these. It's not a chicom head. realcrazy
_________________________
[img] [/img]

Top
#2159558 - 09/22/16 03:49 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
The Best of the Best small block guys are in on these. It's not a chicom head. realcrazy


Where are these heads cast at.... CHINA. Prove me wrong.

Whatever...Not worth the effort...it not my money wasted.


Edited by EV2Bird (09/22/16 04:01 PM)

Top
#2159633 - 09/22/16 05:56 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
So is the head any good for the price? What else is out there with the same flow for around the same money?
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2160029 - 09/23/16 10:40 AM Re: BPE Small Block CNC Cylinder Heads [Re: 67autocross]
clonestocker Offline
top fuel

Registered: 01/20/03
Posts: 2129
Loc: Tucson, Arizona
Originally Posted By 67autocross
So is the head any good for the price? What else is out there with the same flow for around the same money?


Call and talk to Rod Bloomer @ BPE. He might have other options for your needs.


Edited by clonestocker (09/23/16 10:40 AM)
_________________________
[img] [/img]

Top
#2160334 - 09/23/16 05:10 PM Re: BPE Small Block CNC Cylinder Heads [Re: EV2Bird]
1972CudaV21 Offline
top fuel

Registered: 07/07/03
Posts: 2044
Loc: Connecticut
Originally Posted By EV2Bird
The Best of the Best small block guys are in on these. It's not a chicom head. realcrazy


Where are these heads cast at.... CHINA. Prove me wrong.

Whatever...Not worth the effort...it not my money wasted.


I'd agree..
_________________________
Made in the USA!

Top
#2160426 - 09/23/16 07:41 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...



Edited by EV2Bird (09/23/16 07:55 PM)

Top
#2160932 - 09/24/16 02:12 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
So these Heads are Chinese made junk and not worth the money from what you are saying, now I just need a suggestion on something in the same price point that is decent. Thanks
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2160963 - 09/24/16 03:19 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
I sent you a pm.

Top
#2162818 - 09/27/16 12:48 PM Re: BPE Small Block CNC Cylinder Heads [Re: 67autocross]
Bad340fish Offline
master

Registered: 01/20/03
Posts: 5371
Loc: Tulsa OK
I don't know where the casting is made but BPE has a great reputation, I would contact him with any questions. I don't own a set, I have some edelbrocks but these look like an OK deal when you factor the cost of quality port work into it. I think my heads were $850 to have ported?
_________________________
68 Barracuda Formula S 340

Top
#2162841 - 09/27/16 01:27 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
Great heads, good people, my only issue is the low cost of the import castings vs the price to the end user.

Thats all.

$2200 for a modified version of the ripped off edelbrock design, thats not very American to me.

Top
#2162916 - 09/27/16 02:45 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
B3422W5 Offline
master

Registered: 01/20/03
Posts: 9928
Loc: Portage,michigan
I got a chance to see the heads up close.
They are VERY nice. Beautiful port work, the casting quality of the head is super nice.
I would think the 225 version would be capable of supporting 650 horsepower.
_________________________
69 Dart GTS, performance upgrades in progress
11.26@ 118.40 best so far. Stock 360 shortblock with eddie heads.

Top
#2163868 - 09/28/16 06:01 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
I'm ordering a rotating assembly from BPE in the next few weeks but I think I will hold off on the heads until I find someone with some hands on feedback.
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2164147 - 09/29/16 01:47 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
See if since your buying a kit if they would sell you a set at cost, it would help you and help them get some of there product out there.

There is where the problem lays, none out there in real use, for eaxmple Mike, MRL had great dyno numbers with the procpmps and so were the spinoff air wolfs.

I do know one set of AW-s dropped a valve on someone but no more info.

Ive had good luck with the china heads, one set with 3k street miles on them, and another on a spray motor.

Im sure these castings rock, they should bend a bit to get some out there and some product reviews.

AND a lower price, but in the end its up to them.

Top
#2169021 - 10/06/16 01:44 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
joshking440 Offline
Lunch is on me!

Registered: 10/18/06
Posts: 4503
Loc: Indy
I don't know this Evbird clown but he sure is quite an expert


The heads are cast overseas. No one disputed that. But all the port development was done by Brett Miller and the heads are cnc ported and valve jobbed at bichoff.

An edelbrock is just a copy of a stock head and you can't argue that.

The fact is that if someone is willing to do anything for this hobby we should at least show a little respect.

But ev2 seems to be quite an expert so maybe he can tell us what HE HAS DONE for this hobby.


I'll await that response.

Top
#2169549 - 10/07/16 10:10 AM Re: BPE Small Block CNC Cylinder Heads [Re: joshking440]
clonestocker Offline
top fuel

Registered: 01/20/03
Posts: 2129
Loc: Tucson, Arizona
Like I said: troll
_________________________
[img] [/img]

Top
#2169658 - 10/07/16 01:12 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
I wrote a valid reply, but edited it to this.

Why dont you girl scouts stop nut hugging and if Rod has an issue or wants to clear up things on these heads, hes a big boy, right? And can do it himself.

Id think people have the right to know if a product is a low cost import casting or a higher cost USA product although the import casting is better quality.

Ive never said any negs. on the castings or the people involved and have bought from Brett in the past.

I sent one of you scout members a pm, man up if you have a personal issue with me and use the pm button.

Top
#2169788 - 10/07/16 05:11 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
I'm going to stick to my ported J heads for the build, by the time I get these heads up to Canada they will cost me $4000 with valves , springs ect so I won't be buying them until I get some type of feed back on them. I will be using a BPE rotating assembly just not sure what cubic inch to order yet.
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2177042 - 10/17/16 03:01 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
As much as I appreciate everyone's opinion, I will say this. Nobody has any idea what I invested to purchase these cylinder heads, how many I had to buy, cost of R and D work, shipping back and forth, CNC work, valve job, travel expenses or the time I have taken away from my full time job to make this happen. I am trying to offer something that is better than what is available at an affordable price. That being said, most fully ported Edelbrock's come in at 190-195 cc's on the intake, my standard port is actually 206 cc's (advertised at 205). If all you think makes power is flow numbers, you are sadly mistaken. I honestly believe the CNC 220 head will make really good power numbers and perform well on the track. And for the record, so does Brett Miller and Tony Bischoff.

Some of the above comments are the exact reason no reasonable person will invest money into the SBM community. I'm not sure if some people just don't like me or what I'm trying to do. Maybe they just want to make themselves feel better but, I will continue on, trying to help the people and the sport I enjoy.

Rod

Top
#2177071 - 10/17/16 03:44 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
Thanks for posting Rod.

Ive been doing these heads for over 3.5 years.

I do know the ins and outs of these heads,castings, R@D and all that goes with it.

My only comments were about the cost, no more, no less and its just my opinion from first hand experience.

If ole Josh and Clontoker didnt feel the need to jump in on something they know ZERO about I was done with it.

Good luck with your heads, it just would be nice if the price was lower to the end user.


Attachments
DSC00049.JPG

DSC00119.JPG




Edited by EV2Bird (10/17/16 04:16 PM)

Top
#2177075 - 10/17/16 03:51 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
Carry on....




Edited by EV2Bird (10/17/16 04:16 PM)

Top
#2177196 - 10/17/16 06:24 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
Just because you have some 3.5 year old ProComp castings doesn't mean anything to me. I have some of those here as well. How about you tell us what a quality casting with an intake,exhaust port and chamber that has been developed by a real SBM guy and CNC ported in addition to a valve job by one of he best engine builders in the country should sell for.

And for the record, it's easy to throw stones when you don't have any skin in the game. If you think I'm making $1000 a set you are out of your mind.

Rod

Top
#2177224 - 10/17/16 06:52 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
Look, its not worth the bs here, mine are 220 cc castings....I start with raw castings.

If you think I'm making $1000 a set you are out of your mind.

If your not your doing it wrong.

Do I need to post port info, flow numbers, track numbers.

Rod, your beating a dead horse here. You have nice castings, so if im wrong about your cost then im wrong.

You act like there is only one head god and one guy who can do a quality valve job whole country.

No one has a patent on any of this junk...so good luck to ya.

Top
#2177259 - 10/17/16 07:44 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
Thanks for your support!

Rod

Top
#2178576 - 10/19/16 12:20 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
mshred Offline
master

Registered: 04/08/09
Posts: 3336
Loc: Toronto
Man, I haven't been on here in ages and do a search on the BPE heads and THIS is what I see???

Rod, bless you for doing what you did to help the SBM cylinder head game...I cannot believe some people would try to knock you down like that, and furthermore that people are foolish enough to agree....then we wonder WHY nothing new gets developed for Mopars

When these came out and I saw them, if I didn't already have my Indy 360-2's, I would be buying these. All the right people involved in their development and production!

Good luck, thank you for supporting, and I look forward to seeing how they perform for people!

Top
#2178830 - 10/19/16 08:57 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
67autocross Offline
super stock

Registered: 11/29/06
Posts: 990
Loc: Manitoba Canada
I'm looking forward to seeing a few builds with these heads, still might get a set I just don't want to be first.
_________________________
A new iron curtain drawn across the 49th parallel

Top
#2185834 - 10/30/16 12:16 PM Re: BPE Small Block CNC Cylinder Heads [Re: Twostick]
Scojodak Offline
member

Registered: 01/08/06
Posts: 127
Loc: Kingman, Az
Originally Posted By Twostick
Combustion chamber shape?


It says 70 cc.
_________________________
Dakota for life!

Top
#2187316 - 11/01/16 10:30 AM Re: BPE Small Block CNC Cylinder Heads [Re: Scojodak]
Streetwize Offline
master

Registered: 01/20/03
Posts: 9547
Loc: Weddington, N.C.
Congrats, Rod!

I don't get it, if it weren't for China all stroker Cranks would still be what $1200-1500 and a set of rods would be $800-$1000/set. And if we didn't have inexpensive stoker cranks and kits..... there wouldn't be the market demand for all the better flowing heads we have today. people tend to forget, there were stroker cranks available back in the 60's and 70's...hardly anyone built them because they were too expensive!

I've been a MoPar guy for 37 years, if there is one thing that has been consistently true for people wanting to enter the mopar market with new affordable products and add enthusiasm to a relatively small market...it is "No good deed goes unpunished!"

congratulations Rod, Had Iknown these were coming I would have waited for them on my last project.


Edited by Streetwize (11/01/16 10:33 AM)
_________________________
WIZE

World's Quickest Diahatsu Rocky (??) 414" Stroker Small block Mopar Powered. 10.84 @ 123...and gettin' quicker!

https://www.youtube.com/watch?v=-mWzLma3YGI

In Car:

https://www.youtube.com/watch?v=PjXcf95e6v0

Top
#2204113 - 11/28/16 08:39 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
scottb Offline
pro stock

Registered: 02/26/05
Posts: 1309
Loc: New Smyrna Beach FL
Rods heads are very nice and for the money it's the best head out there plain and simple Rod thanks for all your help on bringing a head out that won't brake the bank

Top
#2206260 - 12/01/16 10:34 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
HotRodDave Offline
master

Registered: 01/29/05
Posts: 9471
Loc: Kalispell Mt.
If you guys would just read between the lines you could see where EV2bird evidently can sell you a set just like em for $1200 (plus a fair prophit of what $100?) that is equally as good.

Wish I had $2200 sitting around rod I would redrill some magnum intake bolt holes on em and stick a pair on my 410 stroker dakota motor.
_________________________
I am not causing global warming, I am just trying to hold off a impending Ice Age!

68 cuda 360 notchback SOLD

1996 Ram 2500 5.9 eddy intake EQ heads, mild cam upgrade great tow rig!


Top
#2206358 - 12/02/16 06:00 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
EV2Bird Offline
On Vacation

Registered: 06/23/14
Posts: 2963
Loc: Kansas Roads Between 0 and 140...
No Dave thats not what im saying at all I dont sell heads. The heads I do are simply for racer friends and I dont make dick.

If you read between the lines I simply say these are great castings being offered here, my only complaint was the cost because I know what a run from the china side costs.

I hope that clears it up.

Top
#2214205 - 12/14/16 10:37 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
scottb Offline
pro stock

Registered: 02/26/05
Posts: 1309
Loc: New Smyrna Beach FL
No body works for free profit is not a bad word thanks rod your heads will sell just need to get a few sets out there to show people there a great working head

Top
#2215564 - 12/17/16 09:23 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
Thank you to all that have encouraging words for what I am trying to do. In the next few months we will be building an engine utilizing both versions of heads and then we will dyno them back to back over a couple of days. This will be a 421" using one of my 4.125" kits in a stock 360 block on pump gas and some of the parts I've accumulated over the past few years. We are not looking for every ounce of power just, wanting to show what can be expected from an average build.

Rod

Top
#2259790 - 02/26/17 11:00 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
79410aspenrt Offline
enthusiast

Registered: 08/01/11
Posts: 228
Loc: Saskatchewan (SK)
any updates with this head? i would like to see the results.
_________________________
77 Plymouth Volare RoadRunner Drag car


Top
#2261286 - 02/28/17 06:32 PM Re: BPE Small Block CNC Cylinder Heads [Re: 79410aspenrt]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
I wish I had better news to report but, it is what it is. The engine was built and hauled 7 hours one way, only to have issues with the dyno for 3 straight days. We broke the engine in without issue and then everything went to hell. It wouldn't hold the engine at a reasonable RPM to get any usable information. The air / fuel numbers were all over the place and made little to no sense. The dyno would get a hold of the engine but, as soon as the RPM started to climb, it would just let go of it then try to grab it again. We tryed the valve on the back but, it was froze up and wouldn't turn either direction. With several failed attempts at getting a hold of anyone at Superflow we finally gave up.

Rod

Top
#2263869 - 03/05/17 03:56 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
slantzilla Offline
I Live Here

Registered: 01/24/03
Posts: 17836
Loc: Park Forest, IL
I saw a set of these yesterday at the ICH show. Very nice looking pieces.
_________________________
"Everybody funny, now you funny too."

Top
#2282329 - 04/04/17 03:12 PM Re: BPE Small Block CNC Cylinder Heads [Re: slantzilla]
cudadoug Offline
master

Registered: 08/22/03
Posts: 2996
Loc: Between a rock & a hard place
Are there any updates on the test mule motor?

Top
#2282969 - 04/05/17 04:36 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
Silver68RT Offline
member

Registered: 04/14/06
Posts: 80
Loc: Michigan
Are these only for 59 degree blocks, or can they be made to work with 48 degree blocks? I bought a NOS 48 degree R block back in January, and I'm not sure that I want to step all the way up to a W9 head. These heads look like they might be a better fit for me.

Top
#2285381 - 04/10/17 03:53 PM Re: BPE Small Block CNC Cylinder Heads [Re: Silver68RT]
BPE Offline
mopar

Registered: 10/16/08
Posts: 456
Loc: Michigan
I have not tried to get this engine back on a dyno, it's currently sitting on the stand. Yes, these heads are only for 59ยบ engines.

Rod

Top
#2289180 - 04/16/17 11:06 PM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
RTSrunner Offline
super stock

Registered: 11/03/03
Posts: 1185
Loc: Pittsburgh,PA
Is there a BPE website or product distributors? Any BPE search I do comes up Bouchillion perf.Thanks RT

Top
#2290522 - 04/19/17 10:30 AM Re: BPE Small Block CNC Cylinder Heads [Re: BPE]
79410aspenrt Offline
enthusiast

Registered: 08/01/11
Posts: 228
Loc: Saskatchewan (SK)
any dyno time booked for the near future?

very curious to see the difference between the 2 heads.
_________________________
77 Plymouth Volare RoadRunner Drag car


Top
#2298864 - 05/04/17 11:25 AM Re: BPE Small Block CNC Cylinder Heads [Re: RTSrunner]
Twostick Offline
master

Registered: 05/20/03
Posts: 4742
Loc: Downtown Roebuck Ont
Originally Posted By RTSrunner
Is there a BPE website or product distributors? Any BPE search I do comes up Bouchillion perf.Thanks RT


Site is under construction but contact info is there.

http://www.bloomerperformance.com/

Kevin

Top
Page 1 of 3 1 2 3 >

Advertisement
Sponsored Link
Forum Stats
25,002 Registered Members
32 Forums
185,336 Topics
2,147,471 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Huge Mopar Auction June 9 2018 Mansfeild SD
by moparphilll
12/16/17 01:36 AM
What's the latest PC home computer tech? Looking to upgrade
by A12
12/15/17 10:41 PM
2015 SRT 6.4 six speed challenger Boost or NA ????
by voigtspeed
12/15/17 10:27 PM
Air and MPH
by ozymaxwedge
12/15/17 09:29 PM