rocker arms and vavle covers - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech rocker arms and vavle covers

Print Thread

rocker arms and vavle covers #209412 01/31/09 03:48 PM 01/31/09 03:48 PM
Joined: Oct 2005 Posts: 58 PA, USA M moparpilot1 OP member
moparpilot1 OP member M Joined: Oct 2005 Posts: 58 PA, USA	anybody know if the old isky adj. ductile rocker arms will fit under stock big block vavle covers with about .550 lift thanks

Re: rocker arms and vavle covers [Re: moparpilot1] #209413 01/31/09 04:54 PM 01/31/09 04:54 PM
Joined: Aug 2004 Posts: 204 Indiana MFR426 enthusiast
MFR426 enthusiast Joined: Aug 2004 Posts: 204 Indiana	We used to use them and the only problem we had was the adjuster hit the baffles in a couple of spots. A tap with a punch on the baffle gave us enough clearance with no problems. Use a thick gasket as well for a little more height. The new Moroso silicone type would work good I would think. Good Luck! MFR426

Re: rocker arms and vavle covers [Re: MFR426] #209414 01/31/09 11:02 PM 01/31/09 11:02 PM
Joined: Aug 2003 Posts: 43,123 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,123 Bend,OR USA	Quote: We used to use them and the only problem we had was the adjuster hit the baffles in a couple of spots. A tap with a punch on the baffle gave us enough clearance with no problems. Use a thick gasket as well for a little more height. The new Moroso silicone type would work good I would think. Good Luck! MFR426 I had one customer that use a small hole saw to remove the dented part of the baffle instead of dimpling it with a punch Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: rocker arms and vavle covers [Re: Cab_Burge] #209415 02/01/09 01:38 AM 02/01/09 01:38 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	We have the Crane ductile iron rockers under these stock valve covers. It has the MP .557 cam and they do not hit. Ron Last edited by 383man; 02/01/09 01:38 AM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1