|
|
Milling 915s
#209305
01/31/09 12:33 PM
01/31/09 12:33 PM
|
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Can 915s be safely milled to around a 65 cc chamber? Also, what is the nominal cc per .010 removal?
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Re: Milling 915s
[Re: Von]
#209306
01/31/09 12:40 PM
01/31/09 12:40 PM
|
Joined: Nov 2003
Posts: 2,273
Greenville, South Carolina
BBLM23
top fuel
|
top fuel
Joined: Nov 2003
Posts: 2,273
Greenville, South Carolina
|
I don't know the limit, but the 915s on my spare 383 are 67.1cc.
Walter
1969 Dart Swinger w/ARC Pump Gas 493 B1/BS 10.18 at 130mph
Racing Pro in street trim.
1981 Aries ARC 548 B1 8.88 at 147mph (footbraking)
1996 Ram 2500 V10 16.52 at 80mph
1981 Reliant 400
|
|
|
Re: Milling 915s
[Re: 1_WILD_RT]
#209308
02/03/09 03:02 PM
02/03/09 03:02 PM
|
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Anybody know if the 915s can be milled down to 65-67?
Thanks
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
|
|
|
|
