Page 8 of 9 < 1 2 3 4 5 6 7 8 9 >
Topic Options
#2332139 - 07/05/17 06:51 PM Re: My bracket hemi build [Re: sixpackgut]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
Originally Posted By sixpackgut
That is awesome
Hopefully it will go at least 9.84 so you will become motivated to get the pearl going again.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2332269 - 07/05/17 10:47 PM Re: My bracket hemi build [Re: Triple Threat]
sixpackgut Offline
Drag Week Mod Champion

Registered: 06/08/03
Posts: 9034
Loc: Charleston
Originally Posted By Triple Threat
Originally Posted By sixpackgut
That is awesome
Hopefully it will go at least 9.84 so you will become motivated to get the pearl going again.


In a month i will have pretty popups like you do. Need an effing carb
_________________________
Gen 3 power 6.22@110, 9.85@135

performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Top
#2332340 - 07/06/17 05:38 AM Re: My bracket hemi build [Re: Triple Threat]
moparmitch Offline
member

Registered: 02/16/10
Posts: 89
Loc: Michigan
Car is working great!

What oil do you use regularly and what do you switch to for gaining a tenth?

Do you play with different trans and diff lube viscosity as well?

Capacity levels?

Any current video to share?

Thanks and keep up the great work!

Top
#2332431 - 07/06/17 10:14 AM Re: My bracket hemi build [Re: Triple Threat]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 839
Loc: Sellersville Pa
Great build
_________________________
Truth has no agenda, but those with an agenda don't always acknowledge truth

2003 Ram st
2004 Rumble Bee
2005 Ram GTX
Any info on these trucks is greatly appreciated
2005 Ram 1500 (drag truck in building
2014 1500 tradesman(shhhh, it's hiding a 7.0 short block under those eagle heads.

Top
#2332444 - 07/06/17 10:36 AM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
0-10 lucas synthetic when I want to go fast. Car still has 60 PSI down track with it
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2338392 - 07/17/17 12:59 PM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
No changes other than a new set of 29.5x105.W's and I took the throttle stop out from under the carb.

1.42
6.32@109
9.95@134.67

This is at 3380#, through the mufflers.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2338415 - 07/17/17 01:36 PM Re: My bracket hemi build [Re: Triple Threat]
Bad340fish Online   content
master

Registered: 01/20/03
Posts: 5417
Loc: Tulsa OK
Nice Work! Congrats on the new best
_________________________
68 Barracuda Formula S 340

Top
#2338435 - 07/17/17 01:54 PM Re: My bracket hemi build [Re: Triple Threat]
ric3xrt Offline
super stock

Registered: 01/13/06
Posts: 839
Loc: Sellersville Pa
Originally Posted By Triple Threat
No changes other than a new set of 29.5x105.W's and I took the throttle stop out from under the carb.

1.42
6.32@109
9.95@134.67

This is at 3380#, through the mufflers.



Love to hear it, congrats.
_________________________
Truth has no agenda, but those with an agenda don't always acknowledge truth

2003 Ram st
2004 Rumble Bee
2005 Ram GTX
Any info on these trucks is greatly appreciated
2005 Ram 1500 (drag truck in building
2014 1500 tradesman(shhhh, it's hiding a 7.0 short block under those eagle heads.

Top
#2345206 - 07/29/17 10:40 AM Re: My bracket hemi build [Re: ric3xrt]
Wicked49670dart Offline
mopar

Registered: 12/27/08
Posts: 697
Loc: Oak Harbor, WA
Very impressive build! I too am thinking of switching from the 496 to gen III platform. I do have a question on your cam that is installed at 5 degrees advanced @103, how did you arrive at that installed setting and what was the reason? More power down in the lower rpm? I see you race at different tracks, which one is your favorite? I'm on Whidbey Island and was looking for a closer track than Pacific Raceways! Matt
_________________________
70 Dart 3400 496 New Best 6.15@110.37 660ft, 9.76@135 with a 1.34 60ft

Top
#2346217 - 07/31/17 12:42 PM Re: My bracket hemi build [Re: Wicked49670dart]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
Originally Posted By Wicked49670dart
Very impressive build! I too am thinking of switching from the 496 to gen III platform. I do have a question on your cam that is installed at 5 degrees advanced @103, how did you arrive at that installed setting and what was the reason? More power down in the lower rpm? I see you race at different tracks, which one is your favorite? I'm on Whidbey Island and was looking for a closer track than Pacific Raceways! Matt


Thank you.

On the cam, it was designed so that I wouldn't have to buzz the motor to the moon to make power. The cam is ground on a 108, and was supposed to be installed at 104. Using the stock 6.1 Timing set there is no adjustment, it landed at 103 and we checked P to V and all was good so we left it. On the dyno, it was still gaining at 7500, so I don't think running it advanced has hurt power output at high RPM.

The Car made another 21 passes this weekend. Since I race so much it was important that the engine is reliable and I don't have to rev it up much.

From Whidbey your best bets are Pacific, Bremerton and Mission. All are good tracks, all have their quirks. Mission is the fastest if you wait for the fall air and are willing to cross the border. Pacific is home for me because its the closest. Bremerton is a laid back, family type atmosphere, very few accomodations, but a fun place no less. My favorite northwest track is Firebird Raceway in Boise, but that's a 500 mile jaunt so I only race there 1-2 times a year.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2354216 - 08/15/17 11:37 AM Re: My bracket hemi build [Re: Triple Threat]
moparmitch Offline
member

Registered: 02/16/10
Posts: 89
Loc: Michigan
Have you made a bunch of passes with the G3?

What are your current thoughts with the G3 platform?

Has it been a reliable "put gas in it and go" type motor?

Waiting for some new in-car vids...

Thanks!

Top
#2354410 - 08/15/17 05:08 PM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
Its terrible, avoid G3's like the plague.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2354430 - 08/15/17 05:55 PM Re: My bracket hemi build [Re: Triple Threat]
WO23Coronet Offline
master

Registered: 01/08/08
Posts: 3914
Loc: Canada
Originally Posted By Triple Threat
Its terrible, avoid G3's like the plague.


Sarcasm or did something bad happen?

Top
#2354458 - 08/15/17 06:51 PM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
Just sarcasm. I made another 13 runs last weekend.

North of 300 runs on it. Just change the oil.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2354682 - 08/16/17 05:34 AM Re: My bracket hemi build [Re: Triple Threat]
moparmitch Offline
member

Registered: 02/16/10
Posts: 89
Loc: Michigan
Excellent...I'll be looking for a G3 to put in my ride, which was originally going to get a BB.

How many passes before you change the oil?

Top
#2354804 - 08/16/17 10:45 AM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
I'm not religious about it, in the neighborhood of 50-100 runs. Whenever I have time.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2354846 - 08/16/17 11:54 AM Re: My bracket hemi build [Re: Triple Threat]
MattW Offline
top fuel

Registered: 06/02/05
Posts: 2495
Loc: Ontario Canada
Man nice work and with stock lifters and valvetrain.
Nice to have a very good platform to work with.
Matt

Top
#2357560 - 08/21/17 11:45 AM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
Sunday morning would have technically been a new best.

6.30 to the 1/8th, 9.93 according to my run completion, but I lifted to win the round.


Edited by Triple Threat (08/21/17 11:45 AM)
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
#2358994 - 08/24/17 06:21 AM Re: My bracket hemi build [Re: Triple Threat]
moparmitch Offline
member

Registered: 02/16/10
Posts: 89
Loc: Michigan
That's awesome!

Any more in car video?

Just for kicks, I would like to hear what the G3 sounds like from burnout to stripe to compare to the sb. The sb was a screaming monster.

Do you leave off of a brake?

Top
#2359104 - 08/24/17 11:14 AM Re: My bracket hemi build [Re: Triple Threat]
Triple Threat Offline


Registered: 01/19/03
Posts: 6171
Loc: Renton Washington
I dont own a gopro anymore, so I wont have video.

Footbrake.
_________________________
-Dustin
392" G3 Hemi
1.37, 6.17@111, 9.74@136.9

Top
Page 8 of 9 < 1 2 3 4 5 6 7 8 9 >

Advertisement
Sponsored Link
Forum Stats
25,086 Registered Members
32 Forums
185,789 Topics
2,160,171 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
1970 Challenger 4 sale
by drago
Today at 01:20 AM
After market exhaust for Dodge CTD
by big-block-dave
Today at 12:31 AM
Anyone have a battery tender go dead?
by furious70
Yesterday at 11:23 PM
My new intake project
by gremlinsteve
Yesterday at 11:06 PM