Looks good any updates?

Motor coming together, getting it on the dyno is the next step. After dyno we'll paint and finish dressing it up. If things work out right the power trian should be ready to install when it gets back from the body shop.

Looks amazing, 71 R/T's are my favorite Challenger followed closely by the T/A.

Can't wait to see at a show.

Just got my instrument cluster back from Jules, turned out really nice.

Great build! keep us posted!

That body work looks outstanding!!

Thanks, it's coming along well. The car was a rust bucket, we had to spend a lot of time on it. When I was 16 beating the crap out of it I never thought I would pay for it 30 years later.
Who would of thought the Dukes of Hazzard would be a bad influence at the time.

Steering wheel restored

Some information for anybody installing the new goodmark quarters. The hole for the fuel filler in not correct. The recess is bevelled where it should be a 90' degree. This causes problems with fitting the spout as well as the flip top cap. The screw holes don't line up either. Good thing we checked this before paint. We're going to cut out and use the old one from the original quarter. The AMD quarter looks to be the same.

Goodmark before, filler spout and fliptop won't fit properly.


old quarter fit


New quarter after

For the goodmark quarters and flip top caps you can grind the 4 corners on the bottom of the flip top housing at a 45 deg angle and it will fit flush (after its painted )try this first using you old flip top housing. It took me 10 min to make this fit. I got one of the early sets and IM surprised they have not fixed this issue. Remember to fit up the flip top with the trim ring.

WOW! who did those door panels, they look great

I had them done by Classic Car Ranch, all the pieces they did for me turned out really nice.

Finally starting to see gold again.

Looks great,, looking forward to seeing the BODY!! in paint!!! jc

Looks great,, looking forward to seeing the BODY!! in paint!!! jc

when are we going to see pictures of your recent project???

A few more pixs of the paint going on

Looking great...........keep the pics comming......

looks great!!!!!!!

N96-I'm still working on building another rack, for this one,(69 mustang is still on the long nosed Rotisserie), its completely torn down. and ready to get blasted..its ruff.. but that's why they call it a "CHALLENGer"

Do you have the contact info for Jules the restro guy who did you wiper and ip cluster

www.julesdaddio.com