420cid build with a new Ritter Aluminum Block - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 420cid build with a new Ritter Aluminum Block

Print Thread

Page 8 of 12

1

2

…

6

7

8

9

10

11

12

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2033281 03/17/16 05:47 PM 03/17/16 05:47 PM
Joined: May 2003 Posts: 13,185 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,185 aZLiViN	NICE!!! 👍

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2033292 03/17/16 06:04 PM 03/17/16 06:04 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Originally Posted By 69 lawndart Update it runs, good oil supply to the top end, cold oil pressure is 70 to 80 psi and hot oil pressure is 35 to 40 psi,if you touch the throttle the oil pressure is 60 plus. No bad noises oil is clean. Congrats

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2033527 03/18/16 12:26 AM 03/18/16 12:26 AM
Joined: Dec 2005 Posts: 3,586 Topeka Kansas K ksj master
ksj master K Joined: Dec 2005 Posts: 3,586 Topeka Kansas	Guess I need to get out of the house and make a trip and check it out.Not like its a far drive.LOL.Lookin good Mike.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2033692 03/18/16 11:45 AM 03/18/16 11:45 AM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	Thats some good news! Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2033708 03/18/16 12:07 PM 03/18/16 12:07 PM
Joined: Apr 2003 Posts: 3,509 Tulsa, Oklahoma 340Cuda master
340Cuda master Joined: Apr 2003 Posts: 3,509 Tulsa, Oklahoma	Going to the dyno next or into the car? Thanks, Bill

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041514 03/29/16 11:01 PM 03/29/16 11:01 PM
Joined: Mar 2013 Posts: 103 Kansas, Topeka 6 69 lawndart OP member
69 lawndart OP member 6 Joined: Mar 2013 Posts: 103 Kansas, Topeka	Update, in the car and running, went for a 20 min drive this evening and all is good. Oil pressure is 30 to 35 hot idle and 70 to 80 psi running down the hwy at 70 mph. Oil temp and water temp run 180 deg.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041539 03/29/16 11:28 PM 03/29/16 11:28 PM
Joined: Dec 2005 Posts: 3,586 Topeka Kansas K ksj master
ksj master K Joined: Dec 2005 Posts: 3,586 Topeka Kansas	Nice.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041540 03/29/16 11:28 PM 03/29/16 11:28 PM
Joined: Dec 2005 Posts: 3,586 Topeka Kansas K ksj master
ksj master K Joined: Dec 2005 Posts: 3,586 Topeka Kansas	You need to stripe my driveway.LOL Last edited by ksj; 03/29/16 11:29 PM.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041549 03/29/16 11:34 PM 03/29/16 11:34 PM
Joined: Oct 2010 Posts: 2,405 Ambridge, Pa. R rickraw top fuel
rickraw top fuel R Joined: Oct 2010 Posts: 2,405 Ambridge, Pa.	Cool. How soon will we see a time slip?

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041574 03/29/16 11:57 PM 03/29/16 11:57 PM
Joined: Mar 2013 Posts: 103 Kansas, Topeka 6 69 lawndart OP member
69 lawndart OP member 6 Joined: Mar 2013 Posts: 103 Kansas, Topeka	Track will be open in 3 weeks. I hope to make a few passes as long as everything is good.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041578 03/30/16 12:01 AM 03/30/16 12:01 AM
Joined: Oct 2010 Posts: 2,405 Ambridge, Pa. R rickraw top fuel
rickraw top fuel R Joined: Oct 2010 Posts: 2,405 Ambridge, Pa.	That's great, good luck, keep us posted.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041593 03/30/16 12:15 AM 03/30/16 12:15 AM
Joined: May 2003 Posts: 13,185 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,185 aZLiViN	more pictures!!!

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041607 03/30/16 12:33 AM 03/30/16 12:33 AM
Joined: Mar 2013 Posts: 103 Kansas, Topeka 6 69 lawndart OP member
69 lawndart OP member 6 Joined: Mar 2013 Posts: 103 Kansas, Topeka	This is the only picture I have of the engine in the car.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041627 03/30/16 12:58 AM 03/30/16 12:58 AM
Joined: May 2003 Posts: 13,185 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,185 aZLiViN	O M G!!! Flat hood would fit!!! I'm in love!

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041628 03/30/16 12:59 AM 03/30/16 12:59 AM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	This is great news, can you give us a summary of what it took machine wise to get it to work. Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041634 03/30/16 01:02 AM 03/30/16 01:02 AM
Joined: Sep 2012 Posts: 1,563 Janesville, WI SpareParts pro stock
SpareParts pro stock Joined: Sep 2012 Posts: 1,563 Janesville, WI	Looks great! Thanks for your perseverance on the project, a summary would be sweet

Re: 420cid build with a new Ritter Aluminum Block [Re: J_BODY] #2041764 03/30/16 10:38 AM 03/30/16 10:38 AM
Joined: Jan 2003 Posts: 8,021 Tulsa OK Bad340fish master
Bad340fish master Joined: Jan 2003 Posts: 8,021 Tulsa OK	Originally Posted By J_BODY O M G!!! Flat hood would fit!!! I'm in love! Super Sleeper.... Last edited by Bad340fish; 03/30/16 10:39 AM. 68 Barracuda Formula S 340

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2041792 03/30/16 11:18 AM 03/30/16 11:18 AM
Joined: Feb 2007 Posts: 2,578 sweden 1 1Fast340 master
1Fast340 master 1 Joined: Feb 2007 Posts: 2,578 sweden	Nice!

Re: 420cid build with a new Ritter Aluminum Block [Re: 1967dartgt] #2042136 03/30/16 06:08 PM 03/30/16 06:08 PM
Joined: Mar 2013 Posts: 103 Kansas, Topeka 6 69 lawndart OP member
69 lawndart OP member 6 Joined: Mar 2013 Posts: 103 Kansas, Topeka	Originally Posted By 1967dartgt This is great news, can you give us a summary of what it took machine wise to get it to work. I am in the process of working with Kent to solve some of the problems we had with this block. I will keep you posted.

Re: 420cid build with a new Ritter Aluminum Block [Re: 69 lawndart] #2113530 07/19/16 08:20 PM 07/19/16 08:20 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	Anyone hear any news on how this worked out ?

Page 8 of 12

1

2

…

6

7

8

9

10

11

12

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1