Previous Thread
Next Thread
Print Thread
Page 1 of 13 1 2 3 12 13
The Quest Has Begun......605 Hemi Build, Updated! #1754090
02/13/15 09:57 PM
02/13/15 09:57 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Well I am now the proud owner of a pile of parts that will be an all aluminum 605 Hemi running pump gas in the quest for 9's in my street car....But I am not ruling out it could end up in my race car for a season.






Last edited by Dragula; 03/07/15 08:26 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754091
02/13/15 10:43 PM
02/13/15 10:43 PM
Joined: Jan 2003
Posts: 1,647
Armada MICH.
DUSTER_340 Offline
top fuel
DUSTER_340  Offline
top fuel

Joined: Jan 2003
Posts: 1,647
Armada MICH.
Nice, what block did you go with?

Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754092
02/13/15 10:47 PM
02/13/15 10:47 PM
Joined: Jan 2003
Posts: 9,963
Frostbitefalls MN (Rocky&Bullw...
gregsdart Offline
master
gregsdart  Offline
master

Joined: Jan 2003
Posts: 9,963
Frostbitefalls MN (Rocky&Bullw...
I'm jealous! Those parts would look great under the hood of my blue 65!


8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754093
02/13/15 10:48 PM
02/13/15 10:48 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Yes sir you sure did get some parts

Re: The Quest Has Begun.......Parts Arrived! [Re: MR_P_BODY] #1754094
02/13/15 11:31 PM
02/13/15 11:31 PM
Joined: Jan 2003
Posts: 6,389
nielsville, minn.
Q
quickd100 Offline
master
quickd100  Offline
master
Q

Joined: Jan 2003
Posts: 6,389
nielsville, minn.
Spill your guts Randy, we need specs!! What did Bullet grind for you for starters????Dave

Re: The Quest Has Begun.......Parts Arrived! [Re: quickd100] #1754095
02/13/15 11:51 PM
02/13/15 11:51 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

Spill your guts Randy, we need specs!! What did Bullet grind for you for starters????Dave




Actually I still need head studs, head gaskets, lifters, pushrods, and a torque convertor.

Cam is kinda mild...I would call it a good Drag Week cam if I ever get a chance to do that...Its a cross between race and street longevity...And its a Barton Grind for his big Hemi's. He says he has this grind in hundreds of big Hemi's with very good success and lots of miles on them, so I am looking forward to firing it up to say the least.

Last edited by Dragula; 02/13/15 11:53 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: DUSTER_340] #1754096
02/14/15 01:32 AM
02/14/15 01:32 AM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

Nice, what block did you go with?




It's an Indy block. Very light, for a Hemi. Especially when compared to the later World Block cast iron ones...I think mine was over 300lbs.

4.75" crank and 4.5 Bore...


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754097
02/14/15 03:56 AM
02/14/15 03:56 AM
Joined: Sep 2012
Posts: 1,563
Janesville, WI
SpareParts Offline
pro stock
SpareParts  Offline
pro stock

Joined: Sep 2012
Posts: 1,563
Janesville, WI
Quest for 9's... 605 hemi...... sandbagger!!

That's a real nice pile of parts

Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754098
02/14/15 05:47 AM
02/14/15 05:47 AM
Joined: Jul 2006
Posts: 4,177
California
mickm Offline
master
mickm  Offline
master

Joined: Jul 2006
Posts: 4,177
California
yup, keep the pictures, specs and progress coming!

Re: The Quest Has Begun.......Parts Arrived! [Re: SpareParts] #1754099
02/14/15 09:34 AM
02/14/15 09:34 AM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

Quest for 9's... 605 hemi...... sandbagger!!

That's a real nice pile of parts





I know, really...More like 9.50's...


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754100
02/14/15 05:33 PM
02/14/15 05:33 PM
Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
3
340RICK Offline
master
340RICK  Offline
master
3

Joined: Feb 2003
Posts: 3,998
GO BUCKS !!!!!!!
Big Time nice pile

Re: The Quest Has Begun.......Parts Arrived! [Re: 340RICK] #1754101
02/15/15 12:58 AM
02/15/15 12:58 AM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
More pics....








Last edited by Dragula; 02/15/15 12:39 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754102
02/15/15 08:53 AM
02/15/15 08:53 AM
Joined: Mar 2003
Posts: 1,629
pa
572charger Offline
top fuel
572charger  Offline
top fuel

Joined: Mar 2003
Posts: 1,629
pa
great choice on parts !!! solid roller cam ?? i ran 9.60s on pump gas with that mopar iron block i going to call bob george this week and get a indy block my block weighed 315 lbs indy is 133 lbs u get anything special done to the block ??


606 hemi pump gas best 9.60 at 142mph on motor
05 hemi daytona 1500 go-mango 4wd quadcab
2007 hotrod mag pump gas drags runner up, roadkill nights dodge big tire winner 2018 2019 back to back
Re: The Quest Has Begun.......Parts Arrived! [Re: 572charger] #1754103
02/15/15 09:23 AM
02/15/15 09:23 AM
Joined: Sep 2005
Posts: 620
Deep DEEP SOUTH
LAD 524 Offline
mopar
LAD 524  Offline
mopar

Joined: Sep 2005
Posts: 620
Deep DEEP SOUTH
DrrrrrrrrrrrrrrroooooooooooooooooollllllllllllllllllllllL


Re: The Quest Has Begun.......Parts Arrived! [Re: 572charger] #1754104
02/15/15 12:14 PM
02/15/15 12:14 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

great choice on parts !!! solid roller cam ?? i ran 9.60s on pump gas with that mopar iron block i going to call bob george this week and get a indy block my block weighed 315 lbs indy is 133 lbs u get anything special done to the block ??




Jim,

Nothing too special. I had it drilled and tapped for the oil cross-over line, had it clearance for the 4.75 stroke, and at the advice of Bob, it was decked a couple thou after the sleeves were put in..

Its not even a raised cam block as I did not want the added expense of a Jesel belt drive..Based on the cam, I was not going to need it. Its a mild mechanical with, just under .700" lift when you factor in my rockers.

So it needs final hone for final bore size and we will begin assembly....Got one other engine on the stand that will be coming off by then...Not mine, but a nice street engine.


Last edited by Dragula; 02/15/15 12:43 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: The Quest Has Begun.......Parts Arrived! [Re: Dragula] #1754105
02/15/15 01:10 PM
02/15/15 01:10 PM
Joined: Jan 2003
Posts: 5,984
Anoka County, MN
L
Leigh Offline
master
Leigh  Offline
master
L

Joined: Jan 2003
Posts: 5,984
Anoka County, MN
If only I wasn't so poor! Looks like fun. Good luck with it.

Re: The Quest Has Begun.......Parts Arrived! [Re: Leigh] #1754106
02/15/15 01:14 PM
02/15/15 01:14 PM
Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
B
BradH Offline
Taking time off to work on my car
BradH  Offline
Taking time off to work on my car
B

Joined: Jan 2003
Posts: 15,439
Val-haul-ass... eventually
"Honey...? Do you mind if we skip making the mortgage payment for the next year... or two?"

Re: The Quest Has Begun.......Parts Arrived! [Re: mickm] #1754107
02/15/15 02:14 PM
02/15/15 02:14 PM
Joined: Jan 2003
Posts: 16,916
NC
440Jim Online work
I Live Here
440Jim  Online Work
I Live Here

Joined: Jan 2003
Posts: 16,916
NC
Quote:

yup, keep the pictures, specs and progress coming!


Looks like a great start.
I agree with posting some specs on the build.

605 CID.... I remember when 500 CID was big !


1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1
Re: The Quest Has Begun.......Parts Arrived! [Re: 440Jim] #1754108
02/15/15 02:55 PM
02/15/15 02:55 PM
Joined: Aug 2008
Posts: 4,049
Mo.
racerx Offline
master
racerx  Offline
master

Joined: Aug 2008
Posts: 4,049
Mo.
605 CID.... I remember when 500 CID was big !

And this is what I have to keep telling those GM guys

Re: The Quest Has Begun.......Parts Arrived! [Re: 440Jim] #1754109
02/15/15 04:25 PM
02/15/15 04:25 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline OP
I Live Here
Dragula  Offline OP
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Quote:

Quote:

yup, keep the pictures, specs and progress coming!


Looks like a great start.
I agree with posting some specs on the build.

605 CID.... I remember when 500 CID was big !




Ok so you guys want some specs......

With BGR's help we spec'd out some cool stuff. The Eagle Rods are 7.1 with ARP 2000 bolts. This was an upgrade BGR wanted due to the stroke of the engine. My understanding is the rods take a lot of abuse in a stroker mill...



'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Page 1 of 13 1 2 3 12 13






Powered by UBB.threads™ PHP Forum Software 7.7.1