Indy 572-13 heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Indy 572-13 heads

Print Thread

Indy 572-13 heads #173635 12/23/08 08:35 PM 12/23/08 08:35 PM
Joined: Dec 2008 Posts: 1,200 UK 6 602heavy OP pro stock
602heavy OP pro stock 6 Joined: Dec 2008 Posts: 1,200 UK	Do these heads use the same spark plugs as the eddy heads , was suggested i use 3/4 reach plugs (ngk bcres) , these sit around 3/8" shy of the combustion chamber. TIA.

Re: Indy 572-13 heads [Re: 602heavy] #173636 12/23/08 09:06 PM 12/23/08 09:06 PM
Joined: Jan 2003 Posts: 18,407 UPPER MICHIGAN, MARQUETTE COUN... N NITROUSN I Live Here
NITROUSN I Live Here N Joined: Jan 2003 Posts: 18,407 UPPER MICHIGAN, MARQUETTE COUN...	yes

Re: Indy 572-13 heads [Re: 602heavy] #173637 12/23/08 09:44 PM 12/23/08 09:44 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	Yes X2...you can go with an Autolite AR 3932, 3933, 3934 depending on the application....Champion C57CX-C63CX, RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1