with a 800 hp goal. and looking to run 9.00 with the dart..i did some home work and found a guy buy the name brett miller.even though he is 3000 miles away i sent him my w8 heads.that flowed 338cfm with a 2.15 intake valve.14 days later i had my heads back home. and on the flow bench.please keep in mind all that shipping time.. these heads will flow 395cfm.on any bench with a 2.15 intake valve. we could not believe your eyes i feel like when i meet brett i meet a friend for life . he walk me through this w8 build.. my motor made 823hp at 7700 rpm and and 638lb at 5600rpm. this was at QMP racing here in so.cal. we did not tune on it much. a jet change and a little timing was it. keep in mind this is a 13to1 pump e85 cast intake single carb motor. more could have been found but 800 was the goal.. i want to thank brett AND A BIG THANKS TO BRAD @QMPRACING. and justadart

Thank you Shiloh for the kind words.

I know this has been long time to hear her sing.

Glad you worked your a$$ off on this.

Very Nice

Congrats, some nice numbers for sure.

so Brad knows how to tune on that dyno I live down the street from his shop ddid he do any machine for you?

Are you in the valley ? Where are you getting your e85 at ??

brad did all the machine work top shelf machine shop. from the keyway lifters to the 55mm cam tunnel.

2 station here in norwalk our north hollywood/ glendora or a google might find you more

Congrats Shiloh. The headaches are finally over.

I would like to add a few notes to this.

A)QMP's dyno is notoriously tight. It would show more power just about anywhere else.

B)Mike at QMP who runs the Dyno is great to work with, and I would feel good about him running the controls on anything I would bring through the door.

C)This was on pump E85 running through a Pro systems SV-1 carb

I have to say I was very impressed with the head work by Brett, and the block work by Brad.

It was a fun day at the dyno for sure, and I am happy Whitedart didn't punch me in the mouth when I started singing "who put the rods out" before the 1st pull

Awesome!

Man, you`ve got yourself a beast there Shiloh...............that puppy should scream............

Very cool, Brett is good people! Care to share any details with us?

That should run good!

I bet the guys at the dyno were going, "dayum"...

heard through the grapevine that you were really close to dyno time. Glad to hear after all you've been through it's finally alive!!! Probably catch up to you in October at Famoso. Is the car ready for that mill??? headers etc?

That's a nice piece and won't kill you in the pocket book with valve spring and lifter $ .
Have Fun with it man.