|
OUTLAW 10.5 CUDA COMING AROUND
#1434412
05/11/13 10:43 AM
05/11/13 10:43 AM
|
Joined: Mar 2008
Posts: 573
PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Well we finally got the car to hook and go down the track. It went 4.43 @ 170 at Cecil County. We ONLY went 1.17 60' due to taking alot of power out of the car to leave w/o smoking the tires. The engine has 27* of total timing and we took 20* out for 3 seconds! Also, the tach broke the pass before, so we had no idea where to shift; I am sure it was short shifted. The car will go 4.20's w/o much problem once we get the 60' down to 1.0's, and bring the power in a little quicker. For those who are interested, the engine is just a 526 B1/TS headed engine w/ a PSI ROOTS blower. It is backed by a Lenco trans and DANA 60. The car weighs in at 2850#. Here is a video of the pass, we went up against the guy who set a NOS record in O/L 10.5 going a 4.12. http://www.youtube.com/watch?v=BD23GTuPecg
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434413
05/11/13 10:55 AM
05/11/13 10:55 AM
|
Joined: Feb 2005
Posts: 20,154
PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,154
PA.
|
VERY NICE. Man those cars are flying.  Whens your next race or testing?
1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pittsburghracer]
#1434414
05/11/13 11:43 AM
05/11/13 11:43 AM
|
Joined: Mar 2008
Posts: 573
PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
VERY NICE. Man those cars are flying. Whens your next race or testing?
Hopefully next weekend for testing....next race is June 1st.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: Thumperdart]
#1434417
05/11/13 06:38 PM
05/11/13 06:38 PM
|
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Leon441
master
|
master
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
|
I love the fact you guys are getting it done with a DANA 60.
Keep us updated.
Career best 8.02 @ 169 at 3050# and 10" tires small block power.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: jim sciortino]
#1434419
05/11/13 08:03 PM
05/11/13 08:03 PM
|
Joined: Mar 2008
Posts: 573
PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
Nice job..... 
Why a roots and wedge instead of a HEMI and screw.....rules???
Couple different reasons....alot cheaper being primary, can weigh 300# less than the screw, did I mention, alot cheaper....a Hemi w/ a "C" screw runs about $50K used w/ fuel system, MAG, etc, ours is $25K.
Another reason is that we want to go just as fast, but with alot less!
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434420
05/11/13 08:32 PM
05/11/13 08:32 PM
|
Joined: Feb 2005
Posts: 20,154
PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,154
PA.
|
Another reason is that we want to go just as fast, but with alot less! PLEASE tell me you didn't just say that. Blame it on not logging out on your computer and someone trying to get you in trouble. I can see all the HEMI guys now texting and calling their Friends and lining up a special Mother day meeting to have you banned from the Mopar society. The guys in the white jackets will be arriving at your home to have you committed for being crazy. 
1970 Duster
Edelbrock headed 408
5.984@112.52
422 Indy headed small block
5.982@112.56 mph
9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434421
05/11/13 09:19 PM
05/11/13 09:19 PM
|
Joined: Apr 2007
Posts: 2,026
Trumbull,CT.
jim sciortino
top fuel
|
top fuel
Joined: Apr 2007
Posts: 2,026
Trumbull,CT.
|
Quote:
Quote:
Nice job.....
Why a roots and wedge instead of a HEMI and screw.....rules???
Couple different reasons....alot cheaper being primary, can weigh 300# less than the screw, did I mention, alot cheaper....a Hemi w/ a "C" screw runs about $50K used w/ fuel system, MAG, etc, ours is $25K.
Another reason is that we want to go just as fast, but with alot less!
I see....
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: ProSport]
#1434424
05/12/13 12:26 AM
05/12/13 12:26 AM
|
Joined: Jan 2003
Posts: 757
Reading PA
duster400
super stock
|
super stock
Joined: Jan 2003
Posts: 757
Reading PA
|
I saw you guys but didn't make it over. I did get a couple of pics.
Anthony
Last edited by duster400; 05/12/13 12:31 AM.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: domingo]
#1434427
05/13/13 01:12 AM
05/13/13 01:12 AM
|
Joined: May 2011
Posts: 625
Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434428
05/13/13 05:48 PM
05/13/13 05:48 PM
|
Joined: Jan 2003
Posts: 2,915
A shed in England
Tig
master
|
master
Joined: Jan 2003
Posts: 2,915
A shed in England
|
Quote:
It went 4.43 @ 170 at Cecil County.
Looks and goes Awesome!!
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials.
9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge.
RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
|
|
|
|
|
