OUTLAW 10.5 CUDA COMING AROUND
#1434412
05/11/13 10:43 AM
05/11/13 10:43 AM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Well we finally got the car to hook and go down the track. It went 4.43 @ 170 at Cecil County. We ONLY went 1.17 60' due to taking alot of power out of the car to leave w/o smoking the tires. The engine has 27* of total timing and we took 20* out for 3 seconds! Also, the tach broke the pass before, so we had no idea where to shift; I am sure it was short shifted. The car will go 4.20's w/o much problem once we get the 60' down to 1.0's, and bring the power in a little quicker. For those who are interested, the engine is just a 526 B1/TS headed engine w/ a PSI ROOTS blower. It is backed by a Lenco trans and DANA 60. The car weighs in at 2850#. Here is a video of the pass, we went up against the guy who set a NOS record in O/L 10.5 going a 4.12. http://www.youtube.com/watch?v=BD23GTuPecg
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434413
05/11/13 10:55 AM
05/11/13 10:55 AM
|
Joined: Feb 2005
Posts: 20,156 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,156
PA.
|
VERY NICE. Man those cars are flying. Whens your next race or testing?
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pittsburghracer]
#1434414
05/11/13 11:43 AM
05/11/13 11:43 AM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
VERY NICE. Man those cars are flying. Whens your next race or testing?
Hopefully next weekend for testing....next race is June 1st.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: Thumperdart]
#1434417
05/11/13 06:38 PM
05/11/13 06:38 PM
|
Joined: Nov 2004
Posts: 4,330 Lynchburg, VA
Leon441
master
|
master
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
|
I love the fact you guys are getting it done with a DANA 60.
Keep us updated.
Career best 8.02 @ 169 at 3050# and 10" tires small block power.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: jim sciortino]
#1434419
05/11/13 08:03 PM
05/11/13 08:03 PM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
Nice job.....
Why a roots and wedge instead of a HEMI and screw.....rules???
Couple different reasons....alot cheaper being primary, can weigh 300# less than the screw, did I mention, alot cheaper....a Hemi w/ a "C" screw runs about $50K used w/ fuel system, MAG, etc, ours is $25K.
Another reason is that we want to go just as fast, but with alot less!
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434420
05/11/13 08:32 PM
05/11/13 08:32 PM
|
Joined: Feb 2005
Posts: 20,156 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,156
PA.
|
Another reason is that we want to go just as fast, but with alot less! PLEASE tell me you didn't just say that. Blame it on not logging out on your computer and someone trying to get you in trouble. I can see all the HEMI guys now texting and calling their Friends and lining up a special Mother day meeting to have you banned from the Mopar society. The guys in the white jackets will be arriving at your home to have you committed for being crazy.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434421
05/11/13 09:19 PM
05/11/13 09:19 PM
|
Joined: Apr 2007
Posts: 2,026 Trumbull,CT.
jim sciortino
top fuel
|
top fuel
Joined: Apr 2007
Posts: 2,026
Trumbull,CT.
|
Quote:
Quote:
Nice job.....
Why a roots and wedge instead of a HEMI and screw.....rules???
Couple different reasons....alot cheaper being primary, can weigh 300# less than the screw, did I mention, alot cheaper....a Hemi w/ a "C" screw runs about $50K used w/ fuel system, MAG, etc, ours is $25K.
Another reason is that we want to go just as fast, but with alot less!
I see....
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: ProSport]
#1434424
05/12/13 12:26 AM
05/12/13 12:26 AM
|
Joined: Jan 2003
Posts: 757 Reading PA
duster400
super stock
|
super stock
Joined: Jan 2003
Posts: 757
Reading PA
|
I saw you guys but didn't make it over. I did get a couple of pics.
Anthony
Last edited by duster400; 05/12/13 12:31 AM.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: domingo]
#1434427
05/13/13 01:12 AM
05/13/13 01:12 AM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434428
05/13/13 05:48 PM
05/13/13 05:48 PM
|
Joined: Jan 2003
Posts: 2,915 A shed in England
Tig
master
|
master
Joined: Jan 2003
Posts: 2,915
A shed in England
|
Quote:
It went 4.43 @ 170 at Cecil County.
Looks and goes Awesome!!
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: Defbob]
#1434435
06/15/13 10:26 PM
06/15/13 10:26 PM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
OH NO!! hope everyone is ok!
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: Defbob]
#1434439
06/16/13 10:17 AM
06/16/13 10:17 AM
|
Joined: Jun 2007
Posts: 2,646 Plymouth Meeting, PA
bigtimeauto
Trophy Winner
|
Trophy Winner
Joined: Jun 2007
Posts: 2,646
Plymouth Meeting, PA
|
That sucks. On a good note they are ok. Could have been way worse for sure.
BB, TT5,Procharged 3300lb Street Car 4.79/154
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: modelmakerinc]
#1434444
06/16/13 04:21 PM
06/16/13 04:21 PM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
Oh man that really sucks. What is the outcome of something like this, is the at fault driver supposed to pay/ help pay? or is there insurance for race cars? what is proper etiquette?
I am wondering the same thing as we did not hear anything from the other driver.....no apology or nothing. I know that if we were at fault, we would be compelled to help out w/ $$$$ to repair it...I guess that is just the way we were raised.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434445
06/16/13 04:26 PM
06/16/13 04:26 PM
|
Joined: Jun 2007
Posts: 2,646 Plymouth Meeting, PA
bigtimeauto
Trophy Winner
|
Trophy Winner
Joined: Jun 2007
Posts: 2,646
Plymouth Meeting, PA
|
glad to hear its no big deal.
As for the other guy there is only is conscience. I can’t believe he didn’t even come over and say he was sorry. Who knows maybe he will do the right thing. Anybody post this on the bullet yet?
BB, TT5,Procharged 3300lb Street Car 4.79/154
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434446
06/16/13 05:01 PM
06/16/13 05:01 PM
|
Joined: Nov 2004
Posts: 3,619 Norwich CT USA
Defbob
master
|
master
Joined: Nov 2004
Posts: 3,619
Norwich CT USA
|
Quote:
Thanks for the concern guys! If there is anything good about it, the impact was between both wheels and the original rocker panel absorbed most of the hit! Needs a new rocker and door jam, the door and quarter panel can be repaired. No chassis damage at all.....Muff (Adam) is a body man so look for it to be fixed and painted for Cecil in 2 weeks.
That is a relief! Strong car. You can borrow my M35a2 if you want to pay him back the favor, just saying...
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: 68CudaB1]
#1434451
06/16/13 11:43 PM
06/16/13 11:43 PM
|
Joined: Nov 2004
Posts: 6,653 Near Reading PA USA
pinkduster
master
|
master
Joined: Nov 2004
Posts: 6,653
Near Reading PA USA
|
Quote:
If anybody has a 67-69 cuda p/s rocker and door jam please let me know.
This one was at Engler's (north of Hazelton) last summer, probably still there along with at least two coupes. (Someone was cutting the roof off of a coupe when I was there.)
There might be one or two on "the wall" at Klinger's up in Pinegrove. I think a maroon 68 coupe actually fell over onto the other side.
You'd think Mopar Marty in Palmyra might have something.
This stuff is really drying up around here. There may still be one or two totally gutted out coupes at EZ Pull.
And what about Baughman's in York.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pinkduster]
#1434452
06/16/13 11:56 PM
06/16/13 11:56 PM
|
Joined: Feb 2005
Posts: 20,156 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,156
PA.
|
8sdpx-3867424383@sale.craigslist.org [?] flag [?] : miscategorized prohibited spam best of Posted: 2013-06-12, 10:16PM EDT mopar,dodge and plymouth parts (richmond,ohio) 1969 dart parts; left fender 100.00, right fender 125.00, torsion bars#888-#889 50.00, 67-69 barracuda left fender 200.00, auto shift steering column(manual steering)125.00,manual steering box 100.00, barracuda formula"s" side stripe still in Year One box 100.00 Location: richmond,ohio Might be worth checking this guy in Ohio. Its in the pittsburgh craigslist auto parts search Plymouth.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pittsburghracer]
#1434453
06/17/13 08:58 AM
06/17/13 08:58 AM
|
Joined: Oct 2004
Posts: 1,327 south central,Pa
mopar_to_ya
pro stock
|
pro stock
Joined: Oct 2004
Posts: 1,327
south central,Pa
|
Hey Bill, sorry to here about the crash, but glad Adam is ok. As mentioned earlier, call Baughman's and ask for John. I know for a fact he still has a couple cuda coupes over there, and one has the roof cut off of it, so it may be easier to get for you. Baughman's 717-846-3944 I'm gonna check to see which side door jam I have, if it's a pass side, I'll call you, and it's yours. best of luck Ronnie
by the way, this pic is yourself, Dave, and I at the Ram Race at Mason Dixon, lol
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pinkduster]
#1434454
06/17/13 09:22 AM
06/17/13 09:22 AM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
Quote:
If anybody has a 67-69 cuda p/s rocker and door jam please let me know.
This one was at Engler's (north of Hazelton) last summer, probably still there along with at least two coupes. (Someone was cutting the roof off of a coupe when I was there.)
There might be one or two on "the wall" at Klinger's up in Pinegrove. I think a maroon 68 coupe actually fell over onto the other side.
You'd think Mopar Marty in Palmyra might have something.
This stuff is really drying up around here. There may still be one or two totally gutted out coupes at EZ Pull.
And what about Baughman's in York.
That is funny you say that about the roof at Engler's, that was actually Muff (Adam) getting it for another Cuda project he has going. I think he is heading up there today to check and see what is there yet. If not we will try the other suggestions.
Thanks Guys!
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: BIGBLOCK_KAT]
#1434458
06/17/13 11:45 AM
06/17/13 11:45 AM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
Quote:
Glad he decided to help out and good luck!! Sorry I misjudged the post on the bullet.
We were disappointed that he did not track us down but I am sure he had alot on his mind too.
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND - REPAIR PICS
[Re: 68CudaB1]
#1434459
06/23/13 02:13 PM
06/23/13 02:13 PM
|
Joined: Mar 2008
Posts: 573 PA
68CudaB1
OP
mopar
|
OP
mopar
Joined: Mar 2008
Posts: 573
PA
|
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: pittsburghracer]
#1434465
06/24/13 01:23 PM
06/24/13 01:23 PM
|
Joined: Jan 2003
Posts: 19,359 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,359
Las Vegas
|
Glad to see you are getting it back together.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: OUTLAW 10.5 CUDA COMING AROUND
[Re: silverfish]
#1434467
06/24/13 01:42 PM
06/24/13 01:42 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
Sucks about the misfortune, glad to see it going back together so quickly.
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
|
|