https://board.moparts.org/ubbthreads/show...vc=#Post7563223

Any tips on putting them together?

Cheers Don.

Should have come here first. Alot of guys just add to the stock ones. Do a search in the truck section.

Insert tab A into slot B and use a hammer and dolly...

Thats how i did mine, either you can fabricate stuff like this or you cant. i had my cousin come over and do the welding and i used steel tubs from summit.

i actually saved my stock tubs if you wanted to just double up the stock tubs

With the stockers you are limited on how low you can go & how tall of tire you can use. The tubs like above look good & you can tailor the width & height to what you want without a seam in the middle to finish out.

I used a full set of stock tubs added to 1/2 of the tubs in the bed.

cut the floor right at the frame brace that sit on the frame.

notice the frame brace and edge if tub.

has a nice stock look,just fat.

I should have used some of the rolled tubbes like John did on his with my stepside. the sidewall and tub has a nice round shape in a stepbed.

heres mine