Previous Thread
Next Thread
Print Thread
Page 1 of 14 1 2 3 13 14
1970 RoadRunner SRT8 #1292788
08/28/12 02:40 PM
08/28/12 02:40 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
For those checking out my twin turbo 'Cuda build, here's the '70 RR build that I said I would post.

I was delivered a 2006 Charger SRT8 that was a salvage car, but ran and drove. It was supposed to be a light front hit.



Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292789
08/28/12 02:43 PM
08/28/12 02:43 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
After a quick tram gauge check, I knew that wasn't the case. I am using the front and rear suspension/cradles in the '70, so accurate jigs will need to be made. Can't do that with a bent car. So out with the engine and cradle and off to the frame shop.



Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292790
08/28/12 02:45 PM
08/28/12 02:45 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Okay, back from the frame shop. Engine, cradle, and suspension back in and car at ride height.





Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292791
08/28/12 02:48 PM
08/28/12 02:48 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Now up on the rack, squared and leveled at static ride height. I built the jigs to bolt to the rack.





Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292792
08/28/12 02:53 PM
08/28/12 02:53 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Now the RoadRunner. Rear suspension out, engine, trans, and front cradle/suspension out. Body is on air jacks, and the tires (not wheels) that the RR will wear are set under the body. I move the body up and down until the customer is happy with the stance, and then lock it down.





Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292793
08/28/12 02:55 PM
08/28/12 02:55 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
And now is where the fun part starts. The complete front cradle and suspension, along with the complete rear cradle and suspension will be fit into the RoadRunner. Let me know if you guys want to see more of this.


Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292794
08/28/12 03:13 PM
08/28/12 03:13 PM
Joined: Feb 2007
Posts: 1,687
Boston, MA
C
crocha617 Offline
top fuel
crocha617  Offline
top fuel
C

Joined: Feb 2007
Posts: 1,687
Boston, MA
Yes Please !!!

Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292795
08/28/12 04:48 PM
08/28/12 04:48 PM
Joined: Jan 2003
Posts: 1,632
TN
JS29R0B Offline
top fuel
JS29R0B  Offline
top fuel

Joined: Jan 2003
Posts: 1,632
TN
Yes show more but get back to work on the Cuda!!!!!!!

Re: 1970 RoadRunner SRT8 [Re: JS29R0B] #1292796
08/28/12 09:21 PM
08/28/12 09:21 PM
Joined: Dec 2005
Posts: 260
WV.
C
Challenger_Nut Offline
enthusiast
Challenger_Nut  Offline
enthusiast
C

Joined: Dec 2005
Posts: 260
WV.
Are you kidding me? Of course we want to see more!!!

Re: 1970 RoadRunner SRT8 [Re: Challenger_Nut] #1292797
08/29/12 12:36 PM
08/29/12 12:36 PM
Joined: Jan 2003
Posts: 6,266
Renton Washington
T
Triple Threat Offline
master
Triple Threat  Offline
master
T

Joined: Jan 2003
Posts: 6,266
Renton Washington
Quote:

Are you kidding me? Of course we want to see more!!!




-Dustin
67 Dart, 9 second, 392" G3 Hemi
68 Barracuda 340 F/SA
Re: 1970 RoadRunner SRT8 [Re: Triple Threat] #1292798
08/30/12 09:03 AM
08/30/12 09:03 AM
Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Darius Offline
master
Darius  Offline
master

Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Are you saying you intent to just drop a 70 RR onto an 06 Charger frame/suspension??? I would absolutely like to see that as I know the new Charger is wider and longer than the old RR so where/what/how are you cutting/narrowing/shortening to make this work??
What about the interior...dash, console seats, etc??


Driving modern convenience in classic beauty
Re: 1970 RoadRunner SRT8 [Re: Darius] #1292799
08/30/12 04:39 PM
08/30/12 04:39 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Quote:

Are you saying you intent to just drop a 70 RR onto an 06 Charger frame/suspension??? I would absolutely like to see that as I know the new Charger is wider and longer than the old RR so where/what/how are you cutting/narrowing/shortening to make this work??
What about the interior...dash, console seats, etc??




The new Charger actually has a shorter wheelbase. Track width is close.

I'm just using the suspension cradles. Not a big fan on skinning a car. I really don't know what that becomes or its value. A modified RR is still a RR and could be put back stock. The front rails/aprons and part of the floor pan/rails in the rear will be modified.

The customer wants the full interior, so I'll transplant the dash, seats, etc... Everything will work, from the ABS, ESP, to even the airbag. Passenger side will be disabled. It uses the windshield to deploy and would probably push it out because of the rope seal.

The driveshaft will need to be lengthened, and I have a set of custom 18" wheels being made that will clear the Brembo brakes. Don't care for 20's on muscle cars.

Will post some pics when it looks like something beens done!! Measuring and squaring takes FOREVER!


Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: JS29R0B] #1292800
08/30/12 04:42 PM
08/30/12 04:42 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Quote:

Yes show more but get back to work on the Cuda!!!!!!!




'Cuda is finally in paint. My painter will have it for the next month or so, so it's outta my hands!! Never missed a car so much and so glad to see it leave at the same time. When need some time apart!


Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292801
08/31/12 12:28 PM
08/31/12 12:28 PM
Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Darius Offline
master
Darius  Offline
master

Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Quote:

Quote:

Are you saying you intent to just drop a 70 RR onto an 06 Charger frame/suspension??? I would absolutely like to see that as I know the new Charger is wider and longer than the old RR so where/what/how are you cutting/narrowing/shortening to make this work??
What about the interior...dash, console seats, etc??




The new Charger actually has a shorter wheelbase. Track width is close.

I'm just using the suspension cradles. Not a big fan on skinning a car. I really don't know what that becomes or its value. A modified RR is still a RR and could be put back stock. The front rails/aprons and part of the floor pan/rails in the rear will be modified.

The customer wants the full interior, so I'll transplant the dash, seats, etc... Everything will work, from the ABS, ESP, to even the airbag. Passenger side will be disabled. It uses the windshield to deploy and would probably push it out because of the rope seal.

The driveshaft will need to be lengthened, and I have a set of custom 18" wheels being made that will clear the Brembo brakes. Don't care for 20's on muscle cars.

Will post some pics when it looks like something beens done!! Measuring and squaring takes FOREVER!




Cool
Check out this link to see how that dash fit in my 70 GTX
http://www.forbbodiesonly.com/moparforum/showthread.php?t=1121


Driving modern convenience in classic beauty
Re: 1970 RoadRunner SRT8 [Re: Darius] #1292802
08/31/12 12:30 PM
08/31/12 12:30 PM
Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Darius Offline
master
Darius  Offline
master

Joined: Jul 2007
Posts: 3,712
Sacramento, Ca
Here is a pic...lots more at the link and tons more on my thumbdrive if you are interested PM me.


Driving modern convenience in classic beauty
Re: 1970 RoadRunner SRT8 [Re: Darius] #1292803
09/14/12 12:50 PM
09/14/12 12:50 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Thanks Darius, I appreciate the offer of help.

Been slacking on pics. I have a few, but need to upload the others to show progress. I'll try and do that this weekend.

So here is the floor section that will replace the RR's:


It comes out like this:


leaving this:


Did some preliminary fit to see how things would line up:


Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Re: 1970 RoadRunner SRT8 [Re: CJD AUTOMOTIVE] #1292804
10/09/12 08:55 PM
10/09/12 08:55 PM
Joined: Jul 2012
Posts: 36
Tucson, AZ
Furious65 Offline
member
Furious65  Offline
member

Joined: Jul 2012
Posts: 36
Tucson, AZ
Really cool build! I am eager to see it completed!

Re: 1970 RoadRunner SRT8 [Re: Furious65] #1292805
10/10/12 10:31 AM
10/10/12 10:31 AM
Joined: Nov 2006
Posts: 6,005
Reno, Nevada
NV69B7RR Offline
master
NV69B7RR  Offline
master

Joined: Nov 2006
Posts: 6,005
Reno, Nevada
More please!!
I'll be following this thread, your work is amazing!

Re: 1970 RoadRunner SRT8 [Re: NV69B7RR] #1292806
10/10/12 11:33 AM
10/10/12 11:33 AM
Joined: Nov 2003
Posts: 2,936
GA
roadrunninMark Offline
master
roadrunninMark  Offline
master

Joined: Nov 2003
Posts: 2,936
GA
this is gonna be an awesome post to follow!

Re: 1970 RoadRunner SRT8 [Re: roadrunninMark] #1292807
10/10/12 06:17 PM
10/10/12 06:17 PM
Joined: Sep 2008
Posts: 656
Florida
CJD AUTOMOTIVE Offline OP
mopar
CJD AUTOMOTIVE  Offline OP
mopar

Joined: Sep 2008
Posts: 656
Florida
Thanks guys,

Heres a few more pics.

Painted the floor section. If you've ever sprayed inside a car, you'll know why. I'll go back and repaint once everything is finish welded.



I removed the inner rocker section and am prepping it for the square tube. Side impacts will not be an issue!


The new Chargers floor section is actually 4" narrower than the old RR's floor. This worked out well because I can use a 2"x5" box beam welded to the rocker to "fill" in the space. This will give great rigidity to the body as well as offer some side impact protection over the old RR. These are still mock up picks.



More mockup of the front rails.


Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
Page 1 of 14 1 2 3 13 14






Powered by UBB.threads™ PHP Forum Software 7.7.1