Rear drum to disc conversion SSBC kit question - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Rear drum to disc conversion SSBC kit question

Print Thread

Page 3 of 3

1

2

3

Re: Rear drum to disc conversion SSBC kit question [Re: MidPenMopar] #1159733 01/29/12 11:36 PM 01/29/12 11:36 PM
Joined: Dec 2007 Posts: 18,157 Mass DAYCLONA I Live Here
DAYCLONA I Live Here Joined: Dec 2007 Posts: 18,157 Mass	Quote: Turns out that one of my friends also bought the SSBC kit this week too. He asked about having to use the green bearings only and they told him the kit will work with stock or green berrings no problem. We shall see! Hmmmmm, ..unless they have recently changed the axle flange brackets to accept the factory adjuster? ...I don't buy SSBC kits unless supplied by a customer, I machine/fabricate all my own rear wheel disc set-ups based on the SSBC design, (yea I bootlegged their set-up)...I only purchase the calipers and rotors from them as needed....but even the last kit that a customer supplied about a year ago had no provisions for the axle adjuster Mike Last edited by DAYCLONA; 01/29/12 11:44 PM.

Re: Rear drum to disc conversion SSBC kit question [Re: DAYCLONA] #1159734 01/30/12 12:02 AM 01/30/12 12:02 AM
Joined: Dec 2003 Posts: 36,840 South San Francisco, Californi... MidPenMopar OP Looking for fun? Keep looking
MidPenMopar OP Looking for fun? Keep looking Joined: Dec 2003 Posts: 36,840 South San Francisco, Californi...	Quote: but even the last kit that a customer supplied about a year ago had no provisions for the axle adjuster Mike Well the SSBC tech said it's all good for stock or geen bearings so we shall see! Hope it all goes smoothly......

Page 3 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1