New Project 1972 Satellite Part 2
#1157875
01/15/12 03:15 PM
01/15/12 03:15 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
I've picked up another '72 Satellite Project car from a fellow Moparts member. My other Satellite project is on hold because this car is so much more solid and my goal is to have it a decent driver in less than 2 years. Hopefully I will be able to do most of the work myself, and I plan on building it the way that suits my tastes,not worrying about numbers or originality. It will not be another Road Runner clone, although it my look alot like one when I'm done. I'm perfectly OK with an air grabber hood, a rear wing and a Satellite name tag.This car will be a slow project as I will be lucky to spend 10-20 hours a week on it.
It's a 318 ,auto, A/C car, factory color is Doeskin Poly( first time hearing of that one). It's a very solid car with alot less rust than my other Satellite. bounus#1! There's some along the window to quarter panel seams,some in the trunk floor( which I plan on saving) , but next to nothing on the 1/4s, doors fenders and rockers.Since it's an AC car, it already has the 26" rad opening...Bonus#2! Here's what I started out with( thanks to the prev owner's pics).
Mark
Last edited by moopa; 01/15/12 03:19 PM.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157877
01/15/12 03:35 PM
01/15/12 03:35 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
The bad side...hoping to save the door, but if the stud welder/puller won't cut it...I'll replace it. The quarter should be savable.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157878
01/15/12 03:42 PM
01/15/12 03:42 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Just a few min playing with the door (before purchasing a stud welder/puller). To see if I can do anything with it.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157879
01/15/12 03:44 PM
01/15/12 03:44 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
A nasty hole that lurked under the vinyl top that needed a patch....
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157883
01/15/12 04:01 PM
01/15/12 04:01 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Starting to take shape. I'm a very green rookie with bodywork, especially welding, learning as I go...It's just going to halfta do!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157884
01/15/12 04:02 PM
01/15/12 04:02 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Good enuff for this 'ol codger!
Last edited by moopa; 01/15/12 04:04 PM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157885
01/15/12 04:11 PM
01/15/12 04:11 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Getting ready to pull drive train, pop out front windshield, and dash, then into the blasting tent!Just doing the engine bay, trunk area, and some floor pan areas, also some other underside stuff. Thankfully I don't have a rotisserie, or it'd never get done!
Last edited by moopa; 01/15/12 04:14 PM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: Pale_Roader]
#1157887
01/17/12 11:42 PM
01/17/12 11:42 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
I'm learning how to use a shrinking disc so I can make metal repairs with very little filler...I'ts a work in progress...Here's a shot of a bit of wire wheeling the trunk floor...very few pinholes, but I don't think I'm into replacing the floor this go around. Mark
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157888
01/17/12 11:45 PM
01/17/12 11:45 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
The worst of the floor pan...not bad at all!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: 71DemonRON]
#1157890
01/18/12 02:46 AM
01/18/12 02:46 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Thanks Ron, PM me if you have any 71/72 parts left.
Here's the shrinking discs...a 5" and a 9". Trick is to Hammer/dolly metal,then heat up the high spots with the shrinking disc, and cool rapidly with mist of water and the heated metal is supposed to shrink back down to the level of the surrounding metal. So it's a slow process, but experts say with patience, there should be a need for very little filler. ...We'll see...
Mark
Last edited by moopa; 01/18/12 02:47 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157891
01/19/12 02:37 AM
01/19/12 02:37 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Oh, I forgot to mention, I plan on going with some kind of stout big block, possibly a 400 or 440( I have one of each to use if I go that route).Or a stroker of some kind. I'd like to retain the A/C...if it's not too much of a pain. I'd like it to be a menacing street machine, that I can take on the highway for cruises up and down the Island. The plan right now is a high impact Mopar color,or possibly triple black if the bodywork turns out good.I already have the complete black (bucket seats) interior and new black vinyl top purchased, along with re-chromed front/rear bumpers.Wheels will probably be old school mags, or...??? That's a long way off! Here's my first Road Runner from 1981....love this look...I know, I'm lost in a time warp! Mark
Last edited by moopa; 01/19/12 02:47 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157894
01/19/12 10:13 PM
01/19/12 10:13 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Sheldon... I sent you a PM re: shrinking discs.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157899
01/20/12 08:18 AM
01/20/12 08:18 AM
|
Joined: Jan 2005
Posts: 4,862 the frozen wastes...
Pale_Roader
Swears too much
|
Swears too much
Joined: Jan 2005
Posts: 4,862
the frozen wastes...
|
Quote:
Quote:
Mark: Where did you buy the shrinking disc? And the 71-72 body makes that day 2 slotted mag work like no other car!
Sheldon
I agree...here's the shot before I had the car painted...I just love the look, no matter how out-dated it may be.
Mark
No way man... keep it high. I love that look. I'm more ov a Vector guy that a slot guy though... maybe (real) Cragar SS if we're staying nostalgic.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: Pale_Roader]
#1157900
01/23/12 06:44 PM
01/23/12 06:44 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Taking the front bumper and grill off,and it's looking like no evidence of previous accidents or damage on the front.I don't think it's ever been apart on this end, original paint,parts etc...nice to see. Mark
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157902
01/23/12 06:49 PM
01/23/12 06:49 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
After removing the front lower valance( which has it 's share of dings) I noticed some markings that a few of the restores may find interesting or can explain. At this point it doesn't mean a lot to me, but maybe someone can shed some light.... notice the small white "X" on the bottom middle?
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157903
01/23/12 06:51 PM
01/23/12 06:51 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Then on the inside passenger side, a white "37"
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157904
01/23/12 06:53 PM
01/23/12 06:53 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Full shot of back side of valence.
Last edited by moopa; 01/23/12 06:54 PM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: mikemyke71]
#1157906
02/10/12 02:35 AM
02/10/12 02:35 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Quote:
If you decide to remove side mouldings, satellite sebring emblems, lower rocker mouldings,,, i'll buy them,,, thanks mike
I'll keep that in mind, as I don't plan on putting the front to back side trim back on.There is no lower rocker moldings and I'll likely keep the emblems. Mark
Last edited by moopa; 02/10/12 02:37 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157907
02/10/12 02:40 AM
02/10/12 02:40 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Ok, it's time to get serious....took out the motor tonight,and after everything under the hood is stripped off...then to blast the engine compartment! Man there's tons of air conditioning junk on here!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157908
02/10/12 02:42 AM
02/10/12 02:42 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Haven't checked the numbers yet...should be the original...maybe?
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157909
02/10/12 02:45 AM
02/10/12 02:45 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Gonna take a ton of elbow grease!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157914
02/12/12 06:04 PM
02/12/12 06:04 PM
|
Joined: Mar 2004
Posts: 1,581 Friendly, WV
wedgeheaded
pro stock
|
pro stock
Joined: Mar 2004
Posts: 1,581
Friendly, WV
|
Quote:
Thanks Ron, PM me if you have any 71/72 parts left.
Here's the shrinking discs...a 5" and a 9". Trick is to Hammer/dolly metal,then heat up the high spots with the shrinking disc, and cool rapidly with mist of water and the heated metal is supposed to shrink back down to the level of the surrounding metal. So it's a slow process, but experts say with patience, there should be a need for very little filler. ...We'll see...
Mark
I plan to try one of the shrinking discs too. Check out this site. Lots of good tips and tricks. http://www.metalmeet.com/forum/index.php
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: wedgeheaded]
#1157915
02/12/12 10:46 PM
02/12/12 10:46 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Quote:
Quote:
Thanks Ron, PM me if you have any 71/72 parts left.
Here's the shrinking discs...a 5" and a 9". Trick is to Hammer/dolly metal,then heat up the high spots with the shrinking disc, and cool rapidly with mist of water and the heated metal is supposed to shrink back down to the level of the surrounding metal. So it's a slow process, but experts say with patience, there should be a need for very little filler. ...We'll see...
Mark
I plan to try one of the shrinking discs too. Check out this site. Lots of good tips and tricks. http://www.metalmeet.com/forum/index.php
The fellow on that site sold me my shrinking disc kit.
Mark
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157916
02/13/12 12:21 AM
02/13/12 12:21 AM
|
Joined: Feb 2003
Posts: 534 southern in.
72sebring
mopar
|
mopar
Joined: Feb 2003
Posts: 534
southern in.
|
Quote:
Quote:
like it! My sebring plus from high school is almost done as well I think! maybe this summer ! love tese b bodies
That is sweet! What's the story on the engine? Still debating how I'm going to power mine,but I'm a long way from those worries!
Thanks for sharing the pics. Mark
started lif as a 318 904 8 1/4 rear Now 1972 xh well built 440 and 727 from a motor home 8 3/4 from 69 gtx mini tubs. but thinking of selling motor trans and going back small block! this set up alittle scary for this old man! ps look for the lady in the pic
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157917
02/13/12 12:24 AM
02/13/12 12:24 AM
|
Joined: Mar 2004
Posts: 1,581 Friendly, WV
wedgeheaded
pro stock
|
pro stock
Joined: Mar 2004
Posts: 1,581
Friendly, WV
|
Quote:
Quote:
Quote:
Thanks Ron, PM me if you have any 71/72 parts left.
Here's the shrinking discs...a 5" and a 9". Trick is to Hammer/dolly metal,then heat up the high spots with the shrinking disc, and cool rapidly with mist of water and the heated metal is supposed to shrink back down to the level of the surrounding metal. So it's a slow process, but experts say with patience, there should be a need for very little filler. ...We'll see...
Mark
I plan to try one of the shrinking discs too. Check out this site. Lots of good tips and tricks. http://www.metalmeet.com/forum/index.php
The fellow on that site sold me my shrinking disc kit.
Mark
I thought I recognized the disc. My son 180ed his Dakota into a ditch and crumpled the PS bed corner. I plan to hone my skills on his truck. I'm very impressed with the skill level on that site. I've posted a few questions and they seem willing to help a newb out. Cool beans.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: wedgeheaded]
#1157918
02/16/12 02:54 AM
02/16/12 02:54 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Got a chance to try my new toy...a stud welder...got the hang of sticking the studs on... practicing on a minor dent on the 1/4 panel. Works pretty good, but it'll take some more skill on the deeper dents. I like it, tho!
Last edited by moopa; 02/16/12 03:04 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157919
02/16/12 08:48 AM
02/16/12 08:48 AM
|
Joined: Nov 2005
Posts: 15,118 85086
moparpollack
Lil Herman
|
Lil Herman
Joined: Nov 2005
Posts: 15,118
85086
|
Quote:
Got a chance to try my new toy...a stud welder...got the hang of sticking the studs on... practicing on a minor dent on the 1/4 panel. Works pretty good, but it'll take some more skill on the deeper dents. I like it, tho!
One of the best body tools I own. Play around on a junk fender and you will be amazed at how well they work.
56 Plaza 63 D100 step side 67 Coronet, 68 Roadrunner, 69 Super Bees, 69 Coronet 500 convertible, 70 Roadrunner Post, 79 D150 360, and a severe case of Mopar a,d,d
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moparpollack]
#1157920
02/17/12 01:48 AM
02/17/12 01:48 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Quote:
Quote:
Got a chance to try my new toy...a stud welder...got the hang of sticking the studs on... practicing on a minor dent on the 1/4 panel. Works pretty good, but it'll take some more skill on the deeper dents. I like it, tho!
One of the best body tools I own. Play around on a junk fender and you will be amazed at how well they work.
I"ll get lots of practice right here on this car!LOL! I figure the better I get, the less filler to straighten out the body...and I got lots of time to be patient! Mark
Last edited by moopa; 02/17/12 01:52 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157921
02/17/12 01:51 AM
02/17/12 01:51 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
This dent(s) will be a little more challenging!LOL!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157922
02/24/12 01:43 AM
02/24/12 01:43 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
So I thought I'd pull the steering column, since it would be easier to access the brake booster bolts under the dash....
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157923
02/24/12 01:46 AM
02/24/12 01:46 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
And it was, booster came out easily, and pulled off the hood hinges to, and found a super-solid hinge mount area....these are usually rusted on these cars( at least my other cars were.)
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157924
02/24/12 01:48 AM
02/24/12 01:48 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
And then, i figured I'd pull the glass to look at the window channels...they are awesome, also...just a speck of surface rust, nothing serious( all my other cars were rusted here,too!)
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157926
02/24/12 01:52 AM
02/24/12 01:52 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Of course, with the windshield out...well them darned dash mount screws are so easy to access....since I want to change the interior color to black....
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157927
02/24/12 01:55 AM
02/24/12 01:55 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
OUT it came!....Good thing, too, as I found a disgusting mouse motel that used up a broadcast sheet to make a love seat!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157928
02/24/12 01:57 AM
02/24/12 01:57 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Does anyone know what the differences are between the standard dash frame and the rally dash frame? I have one of each, but don't want to swap VINs too badly, and I'd much rather have the rally dash in this car...
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157929
02/24/12 02:52 PM
02/24/12 02:52 PM
|
Joined: Oct 2009
Posts: 1,185 Nanaimo, BC
NOrrTH
super stock
|
super stock
Joined: Oct 2009
Posts: 1,185
Nanaimo, BC
|
two words, stroker 440. Your going all the way so DOOOOO EEEEETT!!
Take your time, I dont want any competition from you this summer ha ha
'71 GTX N96 auto 3:55
'74 Challenger 440+6 4spd 4:10
'71 Duster 340 auto 4:10
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157930
02/24/12 03:46 PM
02/24/12 03:46 PM
|
Joined: Aug 2010
Posts: 428 Oakville, Ontario, Canada
CDN72SE
mopar
|
mopar
Joined: Aug 2010
Posts: 428
Oakville, Ontario, Canada
|
Quote:
Does anyone know what the differences are between the standard dash frame and the rally dash frame? I have one of each, but don't want to swap VINs too badly, and I'd much rather have the rally dash in this car...
I'm pretty sure the frames are the same it's the rallye and standard clusters that differ. Nice work.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: CDN72SE]
#1157932
02/24/12 07:54 PM
02/24/12 07:54 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Quote:
Quote:
Does anyone know what the differences are between the standard dash frame and the rally dash frame? I have one of each, but don't want to swap VINs too badly, and I'd much rather have the rally dash in this car...
I'm pretty sure the frames are the same it's the rallye and standard clusters that differ. Nice work.
That would be nice if the frames are the same, especially re-using the original to the car as it has all the air cond crap. Thanks for the kind words, I hope I can stik with it,as the project gets bigger daily!
Mark
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157933
03/06/12 02:20 AM
03/06/12 02:20 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Gettin ready for sandblasting: Got the front dash and firewall pretty well ready, all the stuff that's a real pain removed: brake booster, proportioning valve, etc
Last edited by moopa; 03/06/12 02:21 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157934
03/06/12 02:25 AM
03/06/12 02:25 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Engine bay ( just before pulling prop.valve)
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157935
03/06/12 02:28 AM
03/06/12 02:28 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
My over-sized sandblasting cabinet is a 10X20 Costco tent...hokey, I know, but it helps keep the mess to a minimum, and I can work in the heated garage.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157939
03/17/12 07:07 AM
03/17/12 07:07 AM
|
Joined: Jan 2005
Posts: 4,862 the frozen wastes...
Pale_Roader
Swears too much
|
Swears too much
Joined: Jan 2005
Posts: 4,862
the frozen wastes...
|
Quote:
Quote:
Damn i wish my Challenger was that clean and solid...
Well ok, if it will make you feel better...I found a couple of holes....likely the culprit for the rust on the driver's side floor pan, no doubt from years of wet leaves/debris sitting in there. Gotta get that area patched, so my feet don't get wet!
Well NOW i feel worse because i sold you a complete rustbucket. What a sleazeball swindler i am...
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: Pale_Roader]
#1157940
03/18/12 01:09 AM
03/18/12 01:09 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Quote:
Quote:
Quote:
Damn i wish my Challenger was that clean and solid...
Well ok, if it will make you feel better...I found a couple of holes....likely the culprit for the rust on the driver's side floor pan, no doubt from years of wet leaves/debris sitting in there. Gotta get that area patched, so my feet don't get wet!
Well NOW i feel worse because i sold you a complete rustbucket. What a sleazeball swindler i am...
Ya, I was just thinking it's too far gone, not salvageable...looking for a cliff to push it over....( LOL J/K!)But seriously, I snapped out of it, and realized it's a heck of allot better than my other 2 projects, and less rust than most other resto projects out there. Very nice place to start, and I could care less that it's a Satellite and not a Road Runner,it's my favorite Mopar body style, and that's all that matters.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157941
03/18/12 12:23 PM
03/18/12 12:23 PM
|
Joined: Oct 2003
Posts: 1,183 eganville ont
440beep
super stock
|
super stock
Joined: Oct 2003
Posts: 1,183
eganville ont
|
yes the frames are the same but you need a ralley wire harness
Plymouth's gonna getcha!
There are 3 things that will live forever, cockroaches, Keith Richards, & slant 6 Dusters
71 gtx 440 4speed air grabber blue on blue with white vinyl roof
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157945
03/24/12 01:25 PM
03/24/12 01:25 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Well I was going to leave the fenders on, but crap...here I go!
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157946
03/24/12 01:29 PM
03/24/12 01:29 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
It will be so much easier cleaning up the under fender area with the fenders off.The fender is in excellent condition....
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157947
03/24/12 01:30 PM
03/24/12 01:30 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Very little work, other than clean-up
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157948
03/24/12 01:32 PM
03/24/12 01:32 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
With a little blasting, it should clean up quite nicely....
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157950
03/24/12 01:37 PM
03/24/12 01:37 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
then the K-Member....now I'll have to fab up some of those cute little wheel stand thingies to move the car around with no susp.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157951
03/26/12 11:05 PM
03/26/12 11:05 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Got the psgr side fender off....getting in deep, now... [image]http:// [/image] [image]http:// [/image] [image]http:// [/image]
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: RUNCHARGER]
#1157954
04/16/12 01:16 AM
04/16/12 01:16 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Finally got some blasting done...but slow going, getting this much done took two full tanks of media.( using recycled blasting copper slag) [image] [/image] [image] [/image] [image] [/image]
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157955
04/16/12 01:23 AM
04/16/12 01:23 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Using the following blasting equipment: homemade pressure blaster, confined space blower,uses 12" accordion style vent tube, and finally, a fresh air breathing unit...it's such a dirty messy job...but at least I'm doing it at home and not having to pay someone else to do it. Mark [image] [/image] [image] [/image]
Last edited by moopa; 04/16/12 01:24 AM.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157956
09/19/12 02:52 AM
09/19/12 02:52 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
A ha! Stalled but not forgotten. Here's the new rotisserie, with the Satellite mounted and ready for even more good things to come!
Last edited by moopa; 09/19/12 02:54 AM.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157957
09/19/12 02:56 AM
09/19/12 02:56 AM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Now to photograph all the underside stuff before I get started.
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: 71DemonRON]
#1157959
09/20/12 10:51 PM
09/20/12 10:51 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
Thanks Ron! Any luck selling your beast?
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157960
09/20/12 10:59 PM
09/20/12 10:59 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
I want to make sure I know where all the little brackets for fuel and brake lines go, before I remove all of them! [image]http:// [/image] [image]http:// [/image]
2015 TorRed Challenger Hellcat,A8
2013 Plum Crazy Challenger SRT8,6 Spd
2013 Black Challenger R/T Classic,auto
(2)72 Satellites, one on hold,one under resto on the rotisserie.
|
|
|
Re: New Project 1972 Satellite Part 2
[Re: moopa]
#1157961
09/20/12 11:10 PM
09/20/12 11:10 PM
|
Joined: Mar 2004
Posts: 375 An Island in the Pacific N.W.
moopa
OP
enthusiast
|
OP
enthusiast
Joined: Mar 2004
Posts: 375
An Island in the Pacific N.W.
|
I was searching for photos of brackets used to mount a 71-72 Plymouth B Body to a rotisserie, but didn't see any I liked. The rotisserie manufacturer suggest using the single bolt hole mounts....and it made me queezy, so I came up with these front mounts that use the front bumper bracket bolt holes.( the factory single hole mount brackets slide through the brackets I made out of 3" angle iron and 2 1/2" square tubing. Due to to offset of the bumper bolt holes, I needed to weld a piece of 1/4" flat bar to the angle iron.) They are very stable, and with the set bolts, I can slide the brackets to get the front rotisserie assembly as close as I want it. [image]http:// [/image] [image]http:// [/image] Then for the rear I fabbed up some stout brackets that mount to the rear spring mount. Even though its only mounted with one bolt, I added some 2"x 1/4" square tubing between the frame and bracket to prevent pivoting. [image]http:// [/image] [image]http:// [/image]
Last edited by moopa; 09/20/12 11:19 PM.
|
|
|
|
|