|
Machine work pics of mopar in the boat
#1099992
10/23/11 02:40 PM
10/23/11 02:40 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
I know its not a race car, but it will hopefully make some of the chevy guys take notice. Engine fired and sounds great. We were cut short on testing due to an issue with the boat itself. Too much last minute thrashing to get ready and ran out of time. I am done for this year and will be ready come spring. Still have to get a carburetor scoop. JJ Beaver in Texas fabricated every plate and bracket. From the motor plates, battery box, Fuel pump and accumulator and tank mounts. Thought you might like to see the work involved.
Last edited by galen; 10/23/11 02:52 PM.
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099993
10/23/11 02:41 PM
10/23/11 02:41 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099994
10/23/11 02:42 PM
10/23/11 02:42 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099995
10/23/11 02:43 PM
10/23/11 02:43 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099996
10/23/11 02:44 PM
10/23/11 02:44 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099997
10/23/11 02:45 PM
10/23/11 02:45 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1099998
10/23/11 02:46 PM
10/23/11 02:46 PM
|
Joined: May 2009
Posts: 831 Missouri
galen
OP
super stock
|
OP
super stock
Joined: May 2009
Posts: 831
Missouri
|
|
|
|
Re: Machine work pics of mopar in the boat
[Re: galen]
#1100003
10/23/11 04:19 PM
10/23/11 04:19 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
You boat guys are a bit coo-coo!...looks very nice...job well done!
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Machine work pics of mopar in the boat
[Re: bonefish]
#1100006
10/23/11 09:03 PM
10/23/11 09:03 PM
|
Joined: Nov 2009
Posts: 3,082 St. Paul , Mn.
tubtar
master
|
master
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
|
Quote:
gotta luv it.BUT I STILL THINK YOU BOAT GUYS ARE CRAZY.
This ! Just in time for Halloween...........VERY scary.
|
|
|
|
|
|