Previous Thread
Next Thread
Print Thread
Head work #1082556
09/25/11 10:04 PM
09/25/11 10:04 PM
Joined: Sep 2011
Posts: 3
new jersey
H
hardpopps Offline OP
member
hardpopps  Offline OP
member
H

Joined: Sep 2011
Posts: 3
new jersey
Over the winter i would like to send out my heads to have some port work done.The heads are B1 Bs would like some info. on a decent place to send them.I know there's better heads out there but I have these and a new set of harlem sharp rockers $1000.00 and headers also $1100.00 so I'm not going to change right now.So if some one could point me in the right direction would be great. I live in NJ.

Re: Head work [Re: hardpopps] #1082557
09/25/11 10:16 PM
09/25/11 10:16 PM
Joined: Jun 2008
Posts: 3,913
usa
L
lewtot184 Offline
master
lewtot184  Offline
master
L

Joined: Jun 2008
Posts: 3,913
usa
call dwayne porter at porter racing heads south burlington vermont, 1-802-951-1955.

Re: Head work [Re: lewtot184] #1082558
09/29/11 11:54 AM
09/29/11 11:54 AM
Joined: Sep 2011
Posts: 3
new jersey
H
hardpopps Offline OP
member
hardpopps  Offline OP
member
H

Joined: Sep 2011
Posts: 3
new jersey
Thank you. any other places anybody knows of?

Re: Head work [Re: hardpopps] #1082559
09/29/11 12:02 PM
09/29/11 12:02 PM
Joined: Jan 2003
Posts: 16,376
D
dogdays Offline
I Live Here
dogdays  Offline
I Live Here
D

Joined: Jan 2003
Posts: 16,376
Modern Cylinder Head? Also board members.

R.

Re: Head work [Re: hardpopps] #1082560
09/29/11 01:35 PM
09/29/11 01:35 PM
Joined: Sep 2006
Posts: 1,139
West Tennessee
R
rbstroker Offline
super stock
rbstroker  Offline
super stock
R

Joined: Sep 2006
Posts: 1,139
West Tennessee

Re: Head work [Re: hardpopps] #1082561
09/29/11 02:18 PM
09/29/11 02:18 PM
Joined: May 2008
Posts: 5,399
Aurora, Colorado
451Mopar Offline
master
451Mopar  Offline
master

Joined: May 2008
Posts: 5,399
Aurora, Colorado
Found this:
http://www.etheads.com/00products.htm#

Click on the b1 bs link and it shows flow numbers.
They have some testominals from Koffels.
I talked to them, but have not used them.
I believe the shown flow numbers are ported to max wedge port size, not sure on valve diameter, but smaller 11/32" valve stems compared to the stock 3/8".

Re: Head work [Re: 451Mopar] #1082562
09/29/11 07:30 PM
09/29/11 07:30 PM
Joined: Jan 2003
Posts: 27,421
Balt. Md
3
383man Offline
Too Many Posts
383man  Offline
Too Many Posts
3

Joined: Jan 2003
Posts: 27,421
Balt. Md
Dwayne Porter and Modern Cyl Head of two of the best there is. I used Dwayne Porter on my Indy heads and the work is perfect and he is a very nice and smart guy. Ron

Re: Head work [Re: 383man] #1082563
09/30/11 09:50 PM
09/30/11 09:50 PM
Joined: Sep 2011
Posts: 3
new jersey
H
hardpopps Offline OP
member
hardpopps  Offline OP
member
H

Joined: Sep 2011
Posts: 3
new jersey
Well I talked too Dawayne porter and seems to be a nice guy full of info. I will send him my heads after the season ends. Thanks for the feed back







Powered by UBB.threads™ PHP Forum Software 7.7.1