Milodon external fitting sizes - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Milodon external fitting sizes

Print Thread

Milodon external fitting sizes #1073224 09/11/11 06:10 PM 09/11/11 06:10 PM
Joined: Jan 2003 Posts: 6,355 Cambridge Vt. mark_gates OP master
mark_gates OP master Joined: Jan 2003 Posts: 6,355 Cambridge Vt.	Hey guys, long time no see. i'm getting ready to drop the 'ol 451 back in the Pacer for some street rompin' and I need a straight AN fitting from the back of the pump. I think they're -12 AN but I'm not sure. It's a straight thread where it goes into the pump and a normal braided line deal on the other end. I don't want to order the wrong thing. 1.41/6.46/10.15/135.60 3650# http://www.soundclick.com/bands/default.cfm?bandID=938869

Re: Milodon external fitting sizes [Re: mark_gates] #1073225 09/11/11 06:59 PM 09/11/11 06:59 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	12AN-o-ring to 12AN in the pumps and covers on the suction side,#12AN at the pan [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: Milodon external fitting sizes [Re: B G Racing] #1073226 09/11/11 07:57 PM 09/11/11 07:57 PM
Joined: Jan 2003 Posts: 6,355 Cambridge Vt. mark_gates OP master
mark_gates OP master Joined: Jan 2003 Posts: 6,355 Cambridge Vt.	Thanks, George! 1.41/6.46/10.15/135.60 3650# http://www.soundclick.com/bands/default.cfm?bandID=938869

Re: Milodon external fitting sizes [Re: mark_gates] #1073227 09/11/11 10:24 PM 09/11/11 10:24 PM
Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi rowin4 master
rowin4 master Joined: Jun 2005 Posts: 6,257 gulfport, ms, west mi	Yep it's ok to butt heads, just don't do it with a butthead

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1