Re: Cuda window channel sealing "tape" ?
[Re: UCUDANT]
#1063219
08/26/11 10:00 AM
08/26/11 10:00 AM
|
Joined: Jun 2008
Posts: 1,822 Colorado
denfireguy
top fuel
|
top fuel
Joined: Jun 2008
Posts: 1,822
Colorado
|
Quote:
I need to know what to use to relace the original sealing type "tape" on my Cuda's side window channels see pic. Also does anyone have a diagram to help with installation.....it's been awhile. Does the tape have a layer between the channel and trim, as well as the body and channel? And is it the same material?
I used the tape in 71TA's kit. It worked great on my 73. It had the same type tape on it originally. Craig
2014 Ram 1500 Laramie, 73 Cuda Previous mopars: 62 Valiant, 65 Fury III, 68 Fury III, 72 Satellite, 74 Satellite, 89 Acclaim, 98 Caravan, 2003 Durango Only previous Non-Mopar: Schwinn Tornado
|
|
|
Re: Cuda window channel sealing "tape" ?
[Re: UCUDANT]
#1063226
08/29/11 10:30 AM
08/29/11 10:30 AM
|
Joined: Jun 2008
Posts: 1,822 Colorado
denfireguy
top fuel
|
top fuel
Joined: Jun 2008
Posts: 1,822
Colorado
|
Quote:
Sorry but it's a PDF file and not easily document export friendly...
It is worse than that, it is a 'protected' PDF. You can cut and paste from PDF if it is unprotected. One huge tip on applying the vinyl. Follow the adhesive directions to the letter. I rushed mine, the VOCs in the glue did not disipate enough before I laid it down and months later, the off gassing had created bubbles under the vinyl all over the roof. It will be replaced in a few weeks. Craig
2014 Ram 1500 Laramie, 73 Cuda Previous mopars: 62 Valiant, 65 Fury III, 68 Fury III, 72 Satellite, 74 Satellite, 89 Acclaim, 98 Caravan, 2003 Durango Only previous Non-Mopar: Schwinn Tornado
|
|
|
|
|