|
live from dunn tire raceway buffalo ny
#1057673
08/19/11 10:01 PM
08/19/11 10:01 PM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
We are at a quick 8 race, qualified #1-on a very short and somewhat tricky track.( short and very bumpy).bob backed out at 3.12 seconds and still ran a 3.97...we are almost ready for round 1....putting some more fuel to it now..altitude is dropping fast...here we go... 
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: Performance Only]
#1057677
08/19/11 11:58 PM
08/19/11 11:58 PM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Not much time, but we'te going into the finals...the other ast car,which has mike Janis' adrl motor in it just lost, so its us and another top dragster going for the $3000.
Off we go soon...then off to another quick 8 at noon tomorrow.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: Eric]
#1057682
08/20/11 12:36 AM
08/20/11 12:36 AM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
The Chevy had nothing for the mopar tonight. A mopar victory !
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: tboomer]
#1057688
08/20/11 06:55 PM
08/20/11 06:55 PM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
We re here in Rochester, #1 qualifier,missed the tune up(3.90) but making some tune up changes for round one...weather and track conditions are changing fast...round 1 soon.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: pittsburghracer]
#1057691
08/20/11 09:44 PM
08/20/11 09:44 PM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
It's us against a blown Chevy altered...we just tried the proverbial "kitchen sink" tune up..and we hazed the tires 660' so we are going back to a 3.90-4.00 tune up.
If we get by the altered we will have a
Twin turbo 632" in the finals
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: CompWedgeEngines]
#1057693
08/20/11 11:02 PM
08/20/11 11:02 PM
|
Joined: Nov 2003
Posts: 3,060
Western New York
sixpackbee
master
|
master
Joined: Nov 2003
Posts: 3,060
Western New York
|
I did not know you could get a Stock Eliminator car in Quick 8. Sorry....good luck Todd. Sounds like that thing is on a good rip.
1959 Bugeye Sprite
1967 Charger Black L code
1967 Coronet R/T Convert Green 440 auto bought from original owner
1968 Charger R/T Bronze 440 4 spd console AM/FM
1969 Super Bee WM21H B5 A40 D21 N96
1969 Barracuda Formula S 340 Convert pilot car
1969 Hemi Road Runner RM23J D32 Omaha orange 4.10 Dana N96 N85
1970 Super Bee WM23N FE5 V1X 3.91 axle package, N96
1970 Road Runner RM21N B3 V1X D13
1971 MG Midget
1971 Road Runner RM23H GW3, A57
1972 Road Runner RM23P FY1, D21
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: sixpackbee]
#1057694
08/21/11 12:59 AM
08/21/11 12:59 AM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
OP
master
|
OP
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
The chebies went down in flames. We had a good 2 night run.have some new information to mull over . We had a hectic week of unplanned repairs, so it was nice to reap some rewards. The ole 451 hemi did the job this weekend. 3 hours till home and hopefully some sleep!
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: live from dunn tire raceway buffalo ny
[Re: CompWedgeEngines]
#1057695
08/21/11 01:50 AM
08/21/11 01:50 AM
|
Joined: Jan 2003
Posts: 2,623
Ca Registered: Mar-2001
hemiallen
master
|
master
Joined: Jan 2003
Posts: 2,623
Ca Registered: Mar-2001
|
At first I thought Rochester had a track, but you just stopped at Delmonico's ? LOL
Isn't Syracuse about 1.5 hrs from Rochester, and Rochester is 1 hr from Buffalo?
I'll be back in Rochester in October, miss the rain and humidity...lol
Good luck tomorrow, and congrats
Allen
'05 Quad cab hemi truck- Flame red- magnaflow exhaust
70-440 cuda-
74-360-4v Challenger- new driver car
EX vehicles:
66 charger Drag car- 10.80 at 123 mph
57 imperial 392 Hemi
1960 Sanger V drive- mondello-built 392 hemi
|
|
|
|
|
