who make reverse eye leaf springs for E-Bodies ? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer who make reverse eye leaf springs for E-Bodies ?

Print Thread

who make reverse eye leaf springs for E-Bodies ? #1004319 06/01/11 09:31 AM 06/01/11 09:31 AM
Joined: Aug 2010 Posts: 208 Munich, Bavaria D docford OP enthusiast
docford OP enthusiast D Joined: Aug 2010 Posts: 208 Munich, Bavaria	I'm currently using 2" lowering blocks on my 1970 Cuda's rear leaf springs. I'd like to get rid of these by using so-called reversed eye leaf springs. They are pretty common for Mustangs, but I've seen none for Mopars. Any idea ?

Re: who make reverse eye leaf springs for E-Bodies ? [Re: docford] #1004320 06/01/11 12:17 PM 06/01/11 12:17 PM
Joined: Jan 2003 Posts: 27,453 So Cal autoxcuda Too Many Posts
autoxcuda Too Many Posts Joined: Jan 2003 Posts: 27,453 So Cal	Quote: I'm currently using 2" lowering blocks on my 1970 Cuda's rear leaf springs. I'd like to get rid of these by using so-called reversed eye leaf springs. They are pretty common for Mustangs, but I've seen none for Mopars. Any idea ? Hotchkis makes a road racing spring with front a rear mid eyes. They also come with 1" drop front spring hanger. The springs have two thick lower support leave that go up to the front eye and one thick upper leave that resists wheel hop under braking which is a problem with these cars. 6661315-CopyofPICT2072.JPG (71 downloads) Last edited by autoxcuda; 06/01/11 12:22 PM.

Re: who make reverse eye leaf springs for E-Bodies ? [Re: autoxcuda] #1004321 06/01/11 07:30 PM 06/01/11 07:30 PM
Joined: Aug 2010 Posts: 208 Munich, Bavaria D docford OP enthusiast
docford OP enthusiast D Joined: Aug 2010 Posts: 208 Munich, Bavaria	OK, thanks! I'll take a look

Re: who make reverse eye leaf springs for E-Bodies ? [Re: docford] #1004322 06/01/11 10:58 PM 06/01/11 10:58 PM
Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY	Caltrac mono's can be had that way. i run a set..... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1