I installed the Fire Core wires and they are a little longer than my MSD's, so now I'll look into some new plug wire locating hardware.

Neighborhood kid likes to work on his Dad's and bro's Harleys and came by with an exhaust that had a broken bolt. I carefully drilled it to just below the thread inner diameter and tapped it from behind (then I found my easyouts )

Then Lauren wanted me to get her new dresser upsatairs, so I had the young man return the favor.

I still managed to get a few things done to the car but need to address the carb to see if it's dumping fuel and why it won't adjust for decent vacuum. I have a power valve dummy plug to install while I investigate. Probably just the fuel dumping due to low vacuum at idle