Then I applied the tape as far out toward the drip rail as possible, if you look at the drip rail trim you would see that trim holes are at the outer edge so I am merely placing the tape accordingly.. I did not snap a pic at that point I guess. With tape covering the quarter panel carefully started with installing the trim loosely so it could be fit together and aligned with the holes. I installed the screw loosely until all was assembled then tightened and then I applied a thin bead of the 3m adhesive to the back of the channel and applied the foam seal...then installed it...here it is loosely installed note the window guide is not installed

6812107-DSCF0546.JPG (175 downloads)