Got the E86 440 cop motor running. Had to get a water pump housing off ebay with the same casting number. This is off an AC car with most of the front brackets missing. I have a 4, 3 and 2 pulley set for the crank and a shallow single, deep single and deep double at the water pump. Have a 440 source PS bracket which has the belt rubbing the pump bolt as well as a 440 source alternator bracket. If there is such a think as a non AC 440 with an alternator and power steering pump, COULD I GET A PICTURE?????? Seems the PS pump needs to go forward, it is a Saginaw. The water pump housing thermostat bolts are NOT parallel with the radiator. Maybe I need a different housing. Thanks Phish


Edited by Spyphish (02/27/18 06:20 PM)