Cam cores (flat tappet) - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cam cores (flat tappet)

Print Thread

Re: Cam cores (flat tappet) [Re: DGS] #2451600 02/14/18 11:04 AM 02/14/18 11:04 AM
Joined: Jul 2005 Posts: 636 Graz, Austria DGS OP mopar
DGS OP mopar Joined: Jul 2005 Posts: 636 Graz, Austria	Thanks! I was told that there are different quality cores/different hardness for flat tappet cams (e.g. EP2, HC, P55 for Engine Power). Not sure if this information is still correct.

Entire Thread
Subject	Posted By	Posted
Cam cores (flat tappet)	DGS	02/13/18 03:22 PM
Re: Cam cores (flat tappet)	fast68plymouth	02/13/18 05:26 PM
Re: Cam cores (flat tappet)	BradH	02/14/18 11:00 PM
Re: Cam cores (flat tappet)	DGS	02/14/18 03:04 PM
Re: Cam cores (flat tappet)	rickseeman	02/14/18 04:10 PM
Re: Cam cores (flat tappet)	fast68plymouth	02/14/18 05:44 PM
Re: Cam cores (flat tappet)	DGS	02/15/18 10:09 AM
Re: Cam cores (flat tappet)	BradH	02/15/18 08:04 PM
Re: Cam cores (flat tappet)	2boltmain	02/16/18 10:07 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1