SO! Not sure if i should ask this or not (under the heading of don't ask a question you don’t want to hear the answer to!) I am putting the running gear and front subframe from a ‘92 Dakota (with change to 5 stud wheels) in my ‘56 plymouth 2 door wagon. The “experts” said the Dakota diff is to wide but by using deep offset ford wheels (centering hub cut out 1 mm) it fits fine. Turns out the Dakota leaf rear springs are EXACTLY the same length as the Plymouth but the Dak springs have more arc, so to get as slammed (low) as I would like the rear of the springs are to high. So I could do many other things that involve money, ...or flip the rear spring mounting bracket over (they will still fit inside the body) and use the Dak springs bolted rather then welded, (just in case). Will it work?


,