Originally Posted By OhioMopar
Originally Posted By 68LAR
Power shifting is done by keeping the gas pedal on the floor between shifts. No loading and unloading of the gears..

Interesting. Dan Brewer told me to not power shift 3rd or there would be damage. Apparently 1st and 2nd are fine, just not 3rd.




Liberty gears told me the same thing. I hadn't have a problem until I upgraded my engine to 600 hp. Yep, 3rd gear blew out on the 3rd pass. Completely rebuilt the 833 with new bearings and replaced the broken gears . Tried that one more time . The rebuilt trans after 2 runs sounds like a bunch of bolts being shaken in a metal bucket. The power pushes the input and output shaft away from the 3rd gear = BOOM!!!!!!


it's ok to butt heads, just don't do it with a butthead