I'm planning on building a 360 magnum for my '94 ram 1500 and i was curious if you had any advice on the build for me. I want a build that keeps the torque curve low enough that I can still use my truck as a truck (mainly hauling motorcycles) But i would like it to be in the 400hp range I plan to swap out the 4 speed 727 for the T-56 (the 6 speed used in challengers) I know that the Cam in them is incredibly tame so upgrading that is likely, However this will require either to chip my current computer or buy a new one there? advice appreciated. Also i will replace the heads as I've found out the stock magnum heads are almost always cracked. My truck right now has the 318 magnum in it but i plan to pull a junkyard 360 because there is no replacement for displacement and the 360 will bolt right in. Finally I'm looking to keep costs as low as possible because I'm 17 and cash isn't easy to come by.