look at the bracket that bolts througth the manifold
I used a cut off wheel and grinded the back bottem side so the trottle bracket would slide under
oblonged the throttle bracket to slide up or down to adjust heigth
found scrap metal 1 1/2 wide 3 inch long
the top part of ANDYF,S bracket I cut it up and used the kickdon section and bolted it together ,the length of the lokar cable deremined where to bolt it together
also with the cutoff wheel I cut a slit in the hole of the kickdown setion so I could slide the cable througth then taking it all apart