Moparts Forums >> Moparts Question and Answer

Pages: 1
68Bullit
mopar


Reged: Mar 30 2008
Loc: Western NC
Any Engle cam users - and COMParisons?
      #5210640 - Tue May 05 2009 07:48 PM

Just wanting to see how many people are using Engle cams and their thoughts in general about the companies quality and customer service. Are they way better than other popular COMPanies out there?

--------------------

13.999 in extreme elevation
stock 360 and 904 MVB & 4.30SG
in a 3500# LandBarge!!!!


Post Extras: Print Post   Remind Me!   Notify Moderator  
NachoRT74
master


Reged: Aug 14 2007
Loc: Caracas, Venezuela, SouthAmeri...
Re: Any Engle cam users - and COMParisons? [Re: 68Bullit]
      #5210671 - Tue May 05 2009 07:56 PM

I have known nothing but GOOD references about them. In fact I have know they were Mopar Camshafts makers long time ago and now they make they own with its own specs ( not sure about the true of that info really ), modern specs like higher lift with shorter duration. Still simetric like MP ones.

you can ask for a custom split cam though ( for example K56/K58 )

lot of techs at dodgecharger.com gave me engle cams useage like advise


Post Extras: Print Post   Remind Me!   Notify Moderator  
70AARcuda
master


Reged: Jan 20 2003
Loc: las vegas
Re: Any Engle cam users - and COMParisons? [Re: NachoRT74]
      #5211155 - Tue May 05 2009 11:17 PM

there is a member here that sells them ..he can save you money..check the for sale ad..i know he has an ad listed there..

i bought one from him....got the cam i wanted and saved money...

--------------------
Tony

70 AARCuda Vitamin C
71 Dart Swinger 360 10.335 @ 128.22(10-05-13 Bakersfield on E85)
71 Demon 360 10.720 @120.66 (9-08- 2012 @ Sacramento)
69 Barracuda FB 360 (10.697@123.40MATS 2011)
91 Duster 360 (11.08@ 119.12 4/12/14 vegas)


Post Extras: Print Post   Remind Me!   Notify Moderator  
sthemi
master


Reged: Jun 07 2004
Loc: Chicago Burbs
Re: Any Engle cam users - and COMParisons? [Re: 70AARcuda]
      #5211169 - Tue May 05 2009 11:31 PM

One of my Chevy buddies with a strong running 454 gave me the heads up on Engle in the 70s.
I have been using them since then and am very happy with the performace and customer service.
They were the supplier to Hughes until a couple of years ago.
Their original designs used the agressive ramps that Mopar engines can use with the larger diameter lifters..
I believe they supplied a lot of the early Hemi Fuel Dragster cams as well.

--------------------
Video Little Red Wagon Indy Nats,BurnoutContest

Edited by sthemi (Tue May 05 2009 11:32 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
70AARcuda
master


Reged: Jan 20 2003
Loc: las vegas
Re: Any Engle cam users - and COMParisons? [Re: sthemi]
      #5211192 - Tue May 05 2009 11:47 PM


jeffpatterson@copper.net

(440)225-6134

copied this from the for sale ads..

i will certainly do business with him again..

--------------------
Tony

70 AARCuda Vitamin C
71 Dart Swinger 360 10.335 @ 128.22(10-05-13 Bakersfield on E85)
71 Demon 360 10.720 @120.66 (9-08- 2012 @ Sacramento)
69 Barracuda FB 360 (10.697@123.40MATS 2011)
91 Duster 360 (11.08@ 119.12 4/12/14 vegas)


Post Extras: Print Post   Remind Me!   Notify Moderator  
stubbs300
Vacation


Reged: Jul 12 2005
Loc: Lost in the ozone again
Re: Any Engle cam users - and COMParisons? [Re: 70AARcuda]
      #5211294 - Wed May 06 2009 04:31 AM

Seems how the majority of the other idiot's that have nothing to say as always on this board that replied have given you any type of answer to your question, I will! Even though you haven't said what your intensions are or what motor your thinking about, I have one in a 383 that is all stock except cam and heads, and I'm extremely happy with it. Im running the 2330 from Hughes in mine. It has strong pull and runs like a raped ape! I didn't want to change converters so I stuck with that. Personally, Im happy with it, and have nothing bad to say about it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
18 registered and 68 anonymous users are browsing this forum.

Moderator:  moparts, SanityLost, tboomer, LTDan, 70Cuda383, Hotwheelsjr, not_a_charger, Eric, Al_Alguire 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1130

Rate this topic

Jump to

Contact Info | Privacy statement main index

Powered by UBB.threads™ 6.5.2