RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
Who makes the adapters on the front of the 392 Hemi heads for running a heater? I am running a chev water pump. The thermostat is on the drivers head but I need basically a Tee on the passenger head for the crossover and heater hose attachment.
-------------------- Working Class....The Class That Built America
|
B1arno
mopar
Reged: Jan 04 2007
Loc: Redwood City Ca.
|
|
I am running a big block Chevy water pump on my 392 and the pump has 2 threaded holes I assumed were for the heater hoses. Its a little hard to see, but one of the holes is right on top of the pump. Arno
Edited by B1arno (Mon Oct 26 2009 10:13 AM)
|
John_Kunkel
I Live Here
Reged: Jan 20 2003
Loc: Rio Linda, CA
|
|
HotHemiHeads has this setup:
http://www.hothemiheads.com/water_pumps/crossover_and_housing.html
-------------------- '98 Ram QuadCab Sport
'97 Viper GTS
'62 Dart Wagon 2 door conversion
'57 Chrysler New Yorker
|
TrWaters
super gas
Reged: Jan 19 2003
Loc: Vermont
|
|
If there is room, you could possibly come off the water ports on the back of the cylinder heads. HotHeads part number 21603. Tell Bob that I sent you.
-------------------- TR Waters Hemi Parts
Precision Billet Parts for Early Hemis
Precision Billet Parts for 5.7 ~ 6.1 Hemis
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
The motor on the stand is one I built for my sister. This is my motor and it has (had) a hot heads crossover, but I want to put a heater in the car, cool nights in the northwest. I guess I can just add a tee on the passenger side head for heater supply and tee into the inlet side of the pump for the return. I paid to have this done, shop went out of business, did not get all my parts back, or money. Glad I didn't lose the car.
-------------------- Working Class....The Class That Built America
|
fstfish66
super stock
Reged: Dec 26 2004
Loc: levittown pa
|
|
as said in earlier post ,,,HOT HEADS has what you want,,or as said,, hot heads also has a aluminum plate that you can use on the back of the head,,same location as in the front of the head for the cross over,,,hot heads aluminum plate is thereaded for a pipe fitting ,,which works out well or you can do what i did,before hot heads came out with this nice looking plate,,,
get a piece of flat plate,,drill it for the mounting holes,,weld a bung on it for the pipe,,on side of your heater needs to come from a hotter source then the water pump,,2 hoses running off the water wont produce much heat at all,,then a plate on the other side to hide your engine temp sender,,,
-------------------- 1966 barracuda prostreeter super charged 340
1940 dodge coupe 241 hemi street rod
2002 cumins ram dailey driver 2008 pacifica
R/T challenger,,dream car
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
Waiting for parts for the heater so I thought I'd piddle around in the trunk for a while. What is it you ask.
-------------------- Working Class....The Class That Built America
Edited by RAT PATROL (Tue Nov 10 2009 09:48 PM)
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
Not getting anything done from LA but will be back home in a couple weeks and start again.
-------------------- Working Class....The Class That Built America
|
fstfish66
super stock
Reged: Dec 26 2004
Loc: levittown pa
|
|
sweet,,,,,,,,,,,
-------------------- 1966 barracuda prostreeter super charged 340
1940 dodge coupe 241 hemi street rod
2002 cumins ram dailey driver 2008 pacifica
R/T challenger,,dream car
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
I had Sunday off, so after the storm and power outage I began again.
-------------------- Working Class....The Class That Built America
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
And then I got out the big hammer.
-------------------- Working Class....The Class That Built America
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
I tried to hide the hoses as much as possible.
-------------------- Working Class....The Class That Built America
|
RAT PATROL
enthusiast
Reged: Nov 06 2007
Loc: Oregon,USA
|
|
And then I added some fuel lines, what else do you do on thanksgiving.
-------------------- Working Class....The Class That Built America
|
fstfish66
super stock
Reged: Dec 26 2004
Loc: levittown pa
|
|
loooks great, i agree EAT then go out to the garage,, i pulled my rear apart swapping from a 4.56 to a 3.91 in my barracuda
-------------------- 1966 barracuda prostreeter super charged 340
1940 dodge coupe 241 hemi street rod
2002 cumins ram dailey driver 2008 pacifica
R/T challenger,,dream car
|